Whitewashing external walls – we bet you didn”t know much

Although external wall whitewashing may appear straightforward, there’s more to it than meets the eye. It’s an age-old technique that has been employed for centuries due to both its usefulness and visual appeal. However, a lot of people are unaware of the complete range of benefits whitewashing can have for your house.

Whitewashing is more than just painting the walls white; it also offers a breathable surface that keeps moisture from building up and shields the walls from the elements. Knowing the ins and outs of whitewashing can make a big difference in your home’s appearance, whether you’re looking to update it or give it a timeless, classic style.

We’ll look at some unexpected whitewashing facts in this post that you most likely weren’t aware of. By the time it’s through, you’ll have a greater understanding of this time-honored method and might even give it some thought for your own house.

Whitewashing houses: advantages and disadvantages

Chalk or lime are diluted with water and applied as a liquid to specific areas of the building to whitewash the walls. This coating is going to provide the building with protection.

This kind of decorating is not very common among people in today’s world. Still, there are summertime residents who follow the older generation’s customs.

• These materials are natural and environmentally friendly.
• This is one of the cheapest design solutions for finishing buildings. The price will probably be the lowest.
• Lime has a disinfectant property, therefore it prevents the occurrence of mold and mildew.
• The material has a high degree of moisture resistance.
• The facades of buildings that are covered with whitewash look very good.
• To decorate the surface of a building, you do not need to spend a lot of time, you do not need special tools, and a small amount of materials.
• To carry out work on applying whitewash to a building, you do not need to have skills, for this it is enough to understand the basic principle of working with the material and everything can be done with your own hands. We will consider all the stages in more detail below.

• No variety of colors.
• Not a long service life, although this is compensated by the low cost.
• When working with lime, it is necessary to use methods to protect your hands and eyes, since the material is very caustic. For protection, use a respirator, glasses, gloves.
• Very few garden styles that whitewashed facades can be combined with. You can use stylistic solutions such as country or Provence.
• You should be careful when preparing the solution, since improper mixing may cause flaws on the surface of the building. For example, bubbles, swelling of the material or stripes of different colors.

It is important to note that practically any wall can be painted white. Whitewash even covers the adobe walls. However, this is more challenging. Straw is a material, after all, and needs to be prepared with care.

If you’re wondering how to use water-based paint to whitewash walls, the process is similar to applying chalk or lime. The same idea is involved, and it will be explained later.

Principles of working with limestone material and application rules

When using lime to whitewash a building, the facade must be coated with a pre-made mixture. A base plane needs to be ready for this. It needs to be level. Ultimately, the coating will replicate all of the irregularities.

Note: Prior to beginning any whitewashing, apply a primer to the facade’s base, let it dry completely, and then begin whitewashing either manually or with the aid of specialized tools.

Tool for whitewashing a house

Buildings can only have their surfaces whitewashed in the evening or during overcast weather. When working with lime, you have to keep it out of the sun because lime is not heat resistant.

Pay attention: There shouldn’t be any lumps or clots; the composition must be uniform. Thus, you should use a drill with an attachment when mixing. The mass will then be uniform.

• If you choose a brush to apply the material, you must wet it. Some time before work, leave the brush in a jar of water so that its wooden base swells and bristle particles do not remain on the surface that has already been whitewashed.
• According to the technology of applying whitewash to the facade of the house, it is necessary to cover the base in several layers. The first layer of lime is distributed in horizontal stripes. The second layer is applied after the first has dried. However, it is applied from top to bottom, that is, perpendicularly.
• If a distributor is used when whitewashing a building, then the rule should be strictly followed. The lime mortar is distributed using a device at a right angle. This is necessary for economical consumption of material and uniform coverage of the entire surface.

Preparing the composition

Making the lime mortar is an easy task. The following ingredients should be added to the mixture: table salt, wallpaper glue, slaked lime, and baking soda.

• Take a medium-sized container, Pour 3 kg of lime into it, mix with 1 liter of water, add 100 g of salt and glue.
• Stir the resulting mass thoroughly so that there are no lumps. Then add water until the total volume is 10 liters.
• Wallpaper glue will give the solution a sticky property, Due to this, the whitewash will lay down better on the wall surface.
• Salt is added so that hands and clothes do not get dirty when touching it. You can also add blueing, then the solution will turn out snow-white.

Note: It’s a good idea to moisten the wall surface prior to beginning any work. The whitewash will then be applied and have a stronger hold.

Principles of working with whitewash from lime

In order to ensure that the whitewash lays down smoothly and that there are no defects afterward, the base must be ready before beginning any whitewashing work:

• Before starting work, the surface must be cleaned. It is forbidden to apply this material on the basis of rust, irregularities, and even with almighty and fat spots.
• If there are cracks on the surface, then you need to process them and close them up. The old whitewash should be removed, can be removed using a special brush. The entire surface is completely plastered (see. How the facade of the house is performed) and after primed. Prior to defiling, it is necessary to close all the objects with the film that the solution did not hit them.

• You can use a brush to process small surfaces (see. Painting brushes: which ones are worth choosing). And in large areas, rollers or a sprayer are best suited. Using a brush is the simplest and most economically advantageous way.

• As written above, the brush must be soaked in a jar of water, so that the lint does not get on the whitewashed surface. It depends on how the final result of the work will look.
• On a large area, a sprayer is used. Working with such a device requires compliance with the rules for applying whitewash. The distance between it and the place of application should be about 30 cm, and sprayed at a right angle. Then the material consumption will be small, and this is economically advantageous.
• Not everyone has the opportunity to buy a device, then an ordinary vacuum cleaner can be an analogue of a sprayer.

External wall whitewashing is more than just a straightforward, conventional way to update the exterior of your house. It may surprise you with the combination of practical advantages and visual appeal it offers. Whitewashing is a method worth taking into consideration because of its eco-friendliness and capacity to shield walls from moisture.

Whitewashing is an easy, affordable way to achieve a clean, fresh look for your home, or you can choose to keep it looking classic. It’s an approach that has proven to be enduring and endearing over time.

Thus, if you’re considering painting your external walls, don’t discount the effectiveness of whitewashing. It’s a classic choice that can update your house and provide useful advantages you may not have known about.

External wall whitewashing is an old method that is easy to use but surprisingly effective. Though many people ignore it, using this age-old technique can provide some weather protection and give your house a modern, clean appearance. It can be a terrific do-it-yourself project that gives any building personality and charm and is reasonably priced and simple to apply.

Video on the topic

Young P&H – K.O. (prod. SK1ttlessBeats) AUDIO

BELIWHATT – ПОНИКА (prod. by Jozey)

беспокоеник – неще (speed up)

unki – запишь (feat. sberbangshawty)

AP$ENT – Мылю и молюся (Unofficial)

Вкуканные