What a nozzle for removing paint from the walls is needed

Although removing outdated paint from walls can be a laborious and time-consuming process, having the right tools can really help. It’s important to know which nozzle to use if you need to remove stubborn paint from a room that needs updating.

The kind of paint and the surface you’re working with determine which nozzles are best for removing paint. The incorrect nozzle can cause problems or even harm the wall. You can select the best tool for the job and improve process efficiency by being aware of your options.

This guide will help you select the ideal nozzle for your project by guiding you through the various kinds of nozzles for paint removal from walls. We will cover all the necessary tools to prepare your walls for a new coat of paint, whether you choose to use a heat gun, pressure washer, or specialty paint scraper.

How to get rid of the paintwork

Note: You will need to ascertain what paint the surface is painted with in order to determine what needs to be cleaned with a nozzle.

What can be painting

• Very often in old houses like "Stalin" or "Khrushchev" buildings, the walls were painted with synthetic paints like nitro enamels, which were applied directly to cement-sand, cement-lime and even lime-sand plaster. If you have come across this type of finishing, then you are, one might say, very lucky – the film in this case will be removed relatively easily, in layers, since synthetics cannot penetrate deeply into the plaster. Of course, if the painting was done on a primer, then the process will be significantly more complicated, since the adhesion there is several orders of magnitude stronger.

• Oil coatings, unlike nitro enamels, are removed much worse, since they are more elastic and cannot come off in layers, and often simply rub off the surface when trying to scrape them. The same can be said about polymers, which are quite elastic, especially since they were applied over primers, which significantly complicates dismantling.

Variety of attachments

You can use a small hatchet, a hard metal spatula, or a set of attachments, like in the above photo, for this type of treatment. However, as these sets are very hard to find in stores, it is much easier to purchase them online.

Old Soviet metal spatulas are also useful for this kind of work because they have a fairly thick blade that does not bend and can be used as a great scraper if properly sharpened. However, a contemporary metal spatula can also be used to create this tool; the only difference is that the blade must be cut shorter, leaving only 2-3 cm of length, to make the tool more rigid.

Practical confirmation exists that a scraper, even if it’s a factory attachment, isn’t always the best tool for cleaning. The cement-sand plaster in the bathroom was painted with oil paint, which presented challenges for the author of this piece.

Because the paint was smeared from the scraper, the coating had to be removed with a hatchet, centimeter by centimeter, which required two days of labor from two people!

Pick, spatula, and perforator

Some people remove paint with a hammer drill attachment, but this approach is too inefficient because the force of the blow damages the plaster more than the paint layer. And there’s no way around this; no matter how sharp you make the spatula or chisel, it will only make deeper cuts into the wall surface rather than lifting a thin layer of coating.

The only situation in which this technique yields noticeable results is when the wall is painted with nitro enamel; in that case, the force of the blow causes tiny layers to just fly off, requiring only spot spatula treatment thereafter.

Whatever they may say or create, the most dependable and tested technique for removing paint at the moment is still painting by hand; in this case, you won’t miss a single millimeter of coating and you’ll accomplish the job effectively. The primary issue with manually cleaning the surface is its extremely low productivity and high labor intensity, as the layer is not always easily removed—easy dismantling could be considered an exception to this rule.

Because the old paint adheres so well, you frequently have to scrape or knock off the surface literally one centimeter at a time.

Drill bit

Paint removal frequently involves the use of drill attachments; however, identical attachments can also be used with an angle grinder (angle grinder), just a different mounting technique.

This device, which resembles a revolving brush with metal bristles, works quite well when the wire is new and unbent, but not for all paints. It often happens, particularly with oil coatings, that the metal bristles are only able to smooth the paint over the surface rather than remove it entirely.

Although even such measures do not guarantee complete cleaning, it is preferable to use brushes with shorter piles for such complex coatings because the grout will be more rigid.

Chain cleaning

Right now, a chain on a rod that is inserted into a drill instead of a drill is thought to be the best attachment for automatic cleaning by many (it’s also probably the least expensive). In order to break the paint on the wall, the drill is kept along its plane while chains are rapidly and methodically pounded on the surface.

Advice: If the installation instructions call for a pure black base, it is advisable to go through a scraper once more after processing the surface in any nozzle automatically.

A specific nozzle is required to remove paint from walls efficiently. This device makes it simpler to remove previous paint layers from walls without causing damage to the surface by attaching to a heat gun or paint scraper. The correct nozzle makes it easier to work more quickly and precisely, producing a smoother finish and readying the wall for fresh décor.

Selecting the appropriate nozzle to remove paint from walls can greatly simplify and expedite your work. Using the right tool guarantees that you complete the task more quickly and with less effort, regardless of whether you are painting a light coat or old, stubborn layers of paint.

A universal nozzle attachment, such as a wire brush or flat scraper, is usually adequate for the majority of do-it-yourself tasks. Specialized nozzles, such as rotary discs or abrasive attachments, can be a game-changer for more difficult tasks, particularly when working with larger surfaces or harder materials.

Your decision will ultimately be guided by your understanding of the paint type and the surface it is applied on. You can save time and frustration by achieving a smoother, cleaner finish with the correct nozzle.

Video on the topic

Nozzle for removing paint from walls, without dust. Diold KZV 125 with Aliexpress.

New technologies!!! Rubanok for removing Stark EWP 1200 | Dismantling of plaster

How to clean concrete from paint?

Washing for paint from walls and metal.Working version of enhanced washing to remove old paint.