We understand the technology – how to putty slopes

A crucial part of any remodeling project is finishing the slopes of windows and doors. In addition to adding visual appeal, properly puttied slopes guarantee long-term durability. Knowing the procedure can help you save time and effort, regardless of whether you’re an experienced do-it-yourselfer or this is your first assignment.

Puttingtying slopes doesn’t have to be difficult, which is good news. You can accomplish a polished, seamless finish with the appropriate equipment and supplies. We’ll guide you through all the necessary steps in this guide, from surface preparation to applying the final coat.

You’ll be able to tackle this project with confidence and raise the standard and appearance of your interior spaces by using these simple techniques.

Using the proper technique is crucial to achieving a smooth and polished finish when puttying slopes. Putty is carefully applied to the sloping regions surrounding windows and doors in this procedure to make sure the surface is level and prepared for painting or other finishing touches. Getting perfect results that improve the overall appearance of your interior walls requires knowing the right procedures, from surface preparation to material selection.

Preparing tools and materials

Puttying windows or doors that slope is not very difficult, as experience demonstrates. All you need is the appropriate equipment and supplies. Thankfully, all products offered on the specialized materials market have reasonable prices (for more information, see the article "Cement putty: everything you need to know about this material").

What tools are needed?

With a broad spatula

Thus, the following equipment will be required:

• spatulas of various sizes and lengths;
• bucket for diluting the solution;
• drill with a “Mixer” attachment for stirring the solution;
• scissors for cutting metal;
• roller and bath;
• a brush for priming the surface before puttying and subsequent painting of the already finished surface.

What materials are needed

Additionally, purchase everything you’ll need at once to save yourself the trouble of returning to the store multiple times later, but keep a small reserve on hand.

Specifically, you will require the following items:

• the putty itself;
• water-based paint;
• perforated corner;
• masking tape;
• grater for sanding;
• fine-grain sandpaper.

The question of how to putty slopes on windows will be answered for you quickly and easily if you have all the above equipment and supplies ready!

Step-by-step description of the process

Let’s now take a closer look at the window finishing procedure. You’ve studied it thoroughly, so you’ll complete the work quickly and effectively.

Preparatory stage

There are a few things you should do in advance of actually applying the putty, like covering the box with masking tape.

This will enable you to:

• protect the frame from mechanical damage;
• protect the frame from contamination with putty and primer.

After all, wooden frames can sustain irreversible damage if they are painted with a deep penetration primer, while metal-plastic frames can still be cleaned with comparatively little difficulty.

Applying a primer is the next step in the preparation process. The best course of action would be to use a substance like Ceresit CT 17, which deeply penetrates the surface and ensures superior putty adhesion in the future.

The following are some advantageous qualities of this kind of primer:

• significantly strengthens the surface, including binding dust;
• does not have a negative effect on the vapor permeability of the surface;
• significantly reduces the absorption capacity of the base;
• completely safe.

Suggestions. Some people still use PVA glue instead of primer because of its historical adhesive power. However, given that primers that offer a denser putty adhesion are now available on the modern building materials market, this is still by far not the best choice.

Installing a perforated corner is the next step.

The following are involved in the installation process:

• measure the length of the slope;
• measure the length of the corner;
• cut the corner with metal cutting scissors;
• lubricate the corner of the slopes with a thin layer of putty;
• install the corner on the putty.

Suggestions. Installing the corners precisely in accordance with the level is necessary to achieve the smoothest slopes possible and will guarantee the overall quality of the work. To accomplish this, affix the level to the installed corner and apply more pressure if necessary to correct any deviations.

In addition to making the process of applying the finish to the surface much simpler, installing corners protects the corners of the slopes from mechanical damage.

Applying putty to the slopes

Applying a starting layer first is advised because this type of material has a high fraction and is great for guaranteeing surface alignment. After the first layer dries, you can apply the second layer across rather than along the slope, in the direction from the window to the corner.

Sand it with sandpaper after applying the second starting layer and letting it dry completely, and then begin applying the finishing layer of material right away.

Using the so-called universal material, also known as "Start-finish" two in one, would be the best course of action.

The following is the application procedure:

• apply it in a thin layer over the entire area of ​​the slopes. This way you can avoid the formation of lumps;
• the finishing layer is not used for leveling, since after applying the starting layer the surface should be as smooth as possible.

The sanding grater should be moved in a circular motion to sand the slopes, and it should be moved strictly evenly in straight vertical movements at the inner corners of the slope and next to the box. Sandpaper should be placed on the 150 brand grater.

The final stage of finishing

You can safely move on to the painting portion of finishing once the top layer has dried. To accomplish this, choose your preferred water-based paint shade and roll it on using a tiny, narrow roller.

Suggestions. The surface needs to be primed with acrylic putty to make sure the paint "sticks" better and remains on it for as long as possible without fading.

Why use a tiny roller when painting?

For a minimum of two reasons:

• it will be inconvenient to work with a large one;
• slopes are small.

A polished interior requires your window or door slopes to be finished with a smooth, expert finish. Your opening’s edges will be clean and long-lasting if you carefully follow the instructions for puttying slopes.

The secret is to prepare. First, give the surface a thorough cleaning and priming, and then carefully apply the first layer of putty. Before sanding and adding more layers as necessary, let it dry fully. This procedure produces a solid foundation for the top coat in addition to filling in voids and leveling the surface.

The best outcomes will come from precision and patience. With the correct equipment and supplies, this task is doable even by a novice. Just keep in mind that methodical work and patience will yield a flawless result that will improve the overall appearance of your walls.

Video on the topic

High-quality puttying of slopes. What to consider to make it reliable

How to putty slopes in a doorway

Ready putty on slopes

Puttying slopes! Reinforcement – what is it?

How and what to putty external slopes

PUTTYING SLOPES IN 5 MINUTES!

Puttying slopes for painting ! EVERYTHING YOU NEED TO KNOW!

3 ways to plaster slopes. Which is better? #31