Volma plaster layer

A popular option for both professionals and do-it-yourselfers, volma plaster leaves your walls with a smooth, long-lasting finish. Whether you’re working on a new construction or remodeling an older space, this plaster layer—which is well-known for its quality and simplicity of application—is made to produce outstanding results.

The versatility of volma plaster makes it especially valuable. It’s an all-purpose solution that works well on a wide range of surfaces, such as plasterboard, concrete, and brick. Its quick-drying qualities also allow you to continue working on other projects without having to wait a long time.

It’s crucial to understand how to apply a Volma plaster layer correctly if you want to create a smooth, even surface with the least amount of work. We’ll guide you through the procedures, hints, and techniques in this post to make the most of this dependable product.

Scope

Range of the material’s application:

• elimination of minor defects, surface leveling;
• minor cosmetic repairs;
• restoration work;
• major finishing of interior walls from scratch;
• finishing coating before grouting with a sponge float;
• formation of relief sculptures, arches, decorative elements.

It makes sense to use the Volma mixture in several DIY repair tasks, such as plastering the ceiling and floor, covering bricks, cellular concrete, wood, and plasterboard.

Crucial! Gypsum mixtures are inappropriate for covering bathroom or utility room walls for boiling and washing water because of their active moisture absorption property. Apply a protective primer to the base if you intend to use Volma to decorate the wall. Steer clear of gypsum and water contact.

Priming and finishing puttying are not necessary for Volma Layer plaster in dry, typical humidity environments.

Characteristics of the mixture

The dry mixture consumption for a coating with a 10 mm layer is 9 kg per square meter. It dries completely in 5 to 7 days after a centimeter layer of plaster is applied. The drying process will be accelerated by actively venturing the air in the space. After 45 minutes, the solution starts to set. Three hours later, it has fully solidified, reached a high density of up to 2 MPa, and developed a glossy, smooth surface. Puttying is not needed again. When plastering, the base temperature is between +5 and +30 degrees. After mixing, the solution can only be applied to the wall for a maximum of 20 minutes.

Preparing the solution

To obtain a working consistency, 0.55-0.65 liters of water at room temperature are taken per 1 kg of dry matter. 1 bag weighing 30 kg consumes from 18 to 21 liters of liquid. The solution is mixed in a clean plastic container. The walls of the container are pre-wetted. Intensive mixing is carried out with a drill with an attachment or a special mixer until a homogeneous mass is obtained, after which the solution settles for 3 minutes. During the settling process, the components mature to working condition. After 3 minutes, the mass is mixed again until the clots and lumps disappear completely. The ready-to-use solution has the consistency of thick sour cream, does not drain from the working part of the tool, and is plastic.

• environmental safety (due to the component composition from natural raw materials);
• vapor permeability (promotes a favorable atmosphere in the room);
• strength and durability (no shrinkage);
• active adhesion to the surface.

Volma is an affordable, hygienic, and useful material. The mixture’s cost is determined by its composition and volume of packaging.

A cost-effective and adaptable wall finishing option, the "Volma plaster layer" provides superior durability, smooth texture, and adhesion. Because of its simple application, it’s a fantastic option for both professionals and do-it-yourselfers. This plaster layer offers a dependable foundation for paint, wallpaper, or other decorative coatings, making it easier to achieve a high-quality finish on a variety of surfaces. Whether you’re building from scratch or renovating an existing space, Volma plaster layer guarantees a solid, level base that improves the appearance and durability of your walls.

How to plaster the Volma layer

Preparation of the wall

Carefully prepare the wall for plastering in order to achieve a robust and aesthetically pleasing coating. phases of the project:

• removal of contaminants, surface dusting;
• removal of the remains of plaster and paint;
• elimination of chips and cracks, alignment;
• checking the curvature of the wall with leveling;
• installation of beacon profiles (if necessary);
• processing of metal elements of the base with an anti -corrosion composition.

Tools

Prepare the required tools before applying the Volma layer plaster. Remember that using subpar tools or making technological mistakes will change how the coating looks. The right technical methods for handling tools are described in the manufacturer’s packaging instructions. Plastering by hand using a Volme mixture is done with:

• falcon and rules;
• kelm;
• multi -sized spatulas;
• leveling floats.

Trial application

At the beginning, dilute a small amount of the mixture to gauge how long it will take to process a square meter of surface area and to become acclimated to the work’s speed. The wall is treated with the solution no later than twenty minutes following preparation. The layer can be as thick as 6 cm if leveling work is done using Volma plaster rather than rough cement mortar. The manufacturer advises applying the material in layers of 0.5–3 cm for decorative finishing.

Sequence of operations

1. Alignment of the base. Using a trowel or falcon, throw the solution onto the wall, then level the surface with a rule from the bottom up. Be guided by beacons or (if the wall is even) by eye. Fill the holes and depressions in the wall with excess solution.
2. Cutting. After the plaster has set, eliminate small roughness in local areas with a rule. If you are going to lay tiles or glue wallpaper in the future, further processing is not needed (except for priming immediately before the final finishing).
3. Smoothing. 25 minutes after cutting, wet the surface with water and move it with a sponge float until the gypsum milk appears. Continue smoothing and filling small pores with milk.
4. Glossing. Use a metal float to rub and compact residual irregularities.
5. Applying decor. Using special tools, give the surface a pattern or texture.

The choice of décor is based on individual tastes and preferences.

Decorating the wall surface

Decorating the wall surface in a unique way is one of the uses for volma plaster. Wet plaster is given a relief texture using specialty rollers. A three-dimensional pattern can be applied using a trowel, a hard brush, a sponge float, a regular spatula, or a specially designed molding tool. While the solution is setting, the master methodically presses the blade against it. The surface takes on a patterned and embossed appearance upon hardening.

The material’s qualities enable you to apply sophisticated techniques for working with dry plaster, execute artistic finishing, and paint walls using paints. The image displays wall décor options for an interior space.

Volma plaster is an adaptable substance that can greatly improve the caliber and robustness of your wall coatings. Because of its well-known simplicity of use, it’s a fantastic choice for both experts and do-it-yourselfers.

With this plaster’s superior smoothness and adherence, you can effortlessly achieve a perfect surface with little work. Whether you’re finishing a freshly painted wall or remodeling an old one, Volma plaster offers a sturdy base for your wall covering.

By selecting Volma plaster, you can make an investment in a material that is both easily worked with and resilient to deterioration. It is a wise choice for anyone wishing to achieve high-quality wall finishes because of its reliable performance and approachable design.

Video on the topic

Gypsum plaster VOLMA Layer Instructions for use

A lesson in plastering from a master \ Plastering on beacons

Which gypsum plaster is better – Knauf Rotband or Volma?

VOLMA-Layer Titan / Thick-layer gypsum plaster

Plaster that does not require PUTTYING and PRIMING. How is this possible ???