A toilet’s tiling can completely change the area and give it a polished, easy-to-maintain appearance. Tiling is a useful and fashionable option for bathroom renovations or just updating the look of your space. Although the process can initially seem overwhelming, it can be made much more manageable with the appropriate strategy and a few helpful pointers.
Make sure you have everything planned out before you begin. This include deciding on the appropriate tile type, taking precise measurements of your area, and gathering all required equipment and supplies. Not only will a well-thought-out plan facilitate a smoother installation, but it will also help you steer clear of common pitfalls.
We’ll guide you through the essential procedures for successfully tiling your toilet in this article. These tips will assist you in achieving a polished appearance that will last for years, from priming the surfaces to installing the tiles and adding the final touches.
In order to achieve a long-lasting and visually beautiful finish, properly tiling a toilet requires careful planning, material selection, and adherence to crucial installation procedures. These tips will assist you in creating a polished appearance that will endure the moist conditions of a bathroom for many years, from surface preparation to exact tile cutting and grout application.
- Instructions for finishing a toilet with ceramic tiles, preparatory work
- Calculation of material
- Alignment of walls and floors
- Facing the walls with tiles in the toilet, the main stages
- Video on the topic
- THE WILDEST MISTAKES IN TOILET REPAIR #172
- DIY toilet installation in 4 minutes
- Toilet renovation: toilet installation, tiles, ceiling, meters
- Bathroom renovation all stages. Preparation of walls, communications, laying tiles, grouting, etc..
- Minimum toilet width for comfortable use | Repair tips | apartment renovation in St. Petersburg
- APARTMENT RENOVATION. HOW NOT TO MAKE A TOILET #120
- TOILET RENOVATION AND FINISHING. Preparing the base, laying floor tiles and grouting. Part 1
- TOILET FINISHING WITH TILES / INSTALLATION IN THE TOILET
Instructions for finishing a toilet with ceramic tiles, preparatory work
The preparatory stage should start with work intended to guarantee that the toilet facing tiles are correctly and securely attached to the surface being finished. Thus:
- It involves going through a fairly simple procedure for choosing the size, color and quality that the toilet facing tiles should have.
- Here you should rely on your personal preferences and financial capabilities, since the price for this type of building material is very high.
- But when choosing the dimensions of the tiles, it is recommended to start from the dimensions of the toilet itself.
- If, for example, it has a very modest area, then use a larger one, for example, 40×40 cm. tiles are not worth it, since all your work will consist of cutting out smaller elements from them, and each time taking up the grinder.
As a point of reference. For the toilet, it is preferable to get smaller facing tiles because they are easier to arrange.
Calculation of material
The next step is to figure out precisely how many tiles you will need, plus an additional five percent. This will cover any defects that no building material package can provide, as well as any instances in which you may inadvertently break or cut a ceramic element with your hands. What you must make arrangements for:
- Calculations must be made based on the location of the tiles you choose.
- Considering that the standard shape of the toilet (cm.Finishing the toilet with panels and other types of material) is a vertically elongated rectangle.
- It is best to lay out rectangular tiles in a horizontal direction, which will visually expand the space.
- Vertically laid ceramic elements will further stretch the room, making it look like a well or an elevator.
Suggestions. The placement of tiles, inserts, and other decorative elements should be considered during the preparation process.
- Combined tiling of toilets looks good in narrow rooms, which involves horizontally dividing the walls into 2 parts.
- In this case, different colored facing tiles for the toilet are laid at the bottom and top.
- Most often, dark tones are laid at the bottom, and lighter tones at the top.
- Decorative ceramic borders are used to separate these areas, matching the color of both the bottom and top coating.
As a point of reference. The traditional version of the finish, which involves painting the entire wall one color, is more appropriate for those who want a stylish toilet at all times.
Alignment of walls and floors
Setting the floors and walls in the proper vertical and horizontal alignment is arguably the most crucial step in getting surfaces ready for tiling. The fact that your work’s outcome will depend on it makes it important. The glossy shine of the tiles will highlight any deviations or curvature, making it difficult to conceal them. Use any of the following materials for these purposes:
Note: Although the final material on the list is used very infrequently, it does occur. Because nearly all homes—even those constructed recently—do not have perfectly level walls or floors.
You’ll need the following supplies and equipment for this:
- Construction plaster (sold in ready-made dry form in packages),
- Trowel,
- Spatula,
- Rule,
- Building level,
- Lacing,
- Plumb line.
- The thickness of the plaster layer on the entire surface will have to be calculated separately. To get a flat surface for plastering work, it is necessary to arrange guide beacons.
- They are located vertically and must be made of mortar. You can use factory T-shaped aluminum beacons.
Before applying plaster, the walls should be primed with an antibacterial and waterproof solution.
As a point of reference. Occasionally, a third of PVA glue is added to the mixture to guarantee more consistent plaster adhesion to the surface.
- The plaster is applied to the wall with a spatula and leveled according to the beacons made using a rule.
- It is applied to the wall in small portions from the bottom up, distributing it from side to side with small movements. To prevent the mixture from sticking to the tool, it must be periodically moistened with water.
Use a concrete screed to level the floor.
Facing the walls with tiles in the toilet, the main stages
Plastering the base and giving it an antibacterial primer are the first steps in a process like tiling a toilet. In a toilet, tile installation starts from the floor. You must perform some calculations here:
- The height of the wall must be divided by the height of the tiles used for finishing, taking into account the seam thickness of 3 mm.
- So, for example, the height of the wall in the toilet is 260 cm, you use tiles 30 cm high. It turns out that you will have 8 rows of full tiles (260:30.3).
- At the same time, 1 row will remain incomplete – 17.6 cm high. This means that first you will have to step back from the floor this value and install a limiter on the wall.
This can be some kind of stand or an attached rail. - After the entire wall is tiled, you can pull out this limiter, and lay the tile cut to the desired size to the floor.
- Calculation of tiles by the width of the wall is done in the same way.
Suggestions. Once the computations are finished, you can combine the adhesive solution. All you’ll need for this is water and the glue itself, in powder form. It is advised to mix using a construction mixer. Examine the packaging from underneath the glue to determine the precise ratios in which the ingredients are combined.
Use as much of the mixture as possible while mixing so that the solution doesn’t dry out. It is thought that combining the solution for 7–8 kg of powder is the ideal quantity.
| Aspect | Recommendation |
| Surface Preparation | Ensure the walls are clean, dry, and smooth before tiling. Remove any old paint or wallpaper, and apply a primer if necessary. |
| Tile Layout | Plan your tile layout in advance, starting from the center of the wall. Use spacers to maintain even gaps between tiles. |
| Adhesive Application | Apply a thin, even layer of adhesive to the wall using a notched trowel. Press tiles firmly into place. |
| Grouting | After the adhesive has set, apply grout between the tiles, ensuring all gaps are filled. Wipe away excess grout with a damp sponge. |
| Finishing | Seal the edges with silicone to prevent water damage. Allow the grout to fully cure before using the toilet. |
When a toilet is tiled correctly, it can significantly alter the room’s appearance and use. You can accomplish a long-lasting and aesthetically pleasing result by carefully choosing the appropriate tiles, prepping the surface, and installing them according to the suggested procedures.
To guarantee a tidy and expert finish, pay close attention to the arrangement and spacing of the tiles. Before using the area, make sure you use the right adhesive and grout and give everything enough time to set. By taking these precautions, future problems like uneven or cracked tiles may be avoided.
Long-term benefits come from taking the time to complete the task correctly. In addition to being simpler to maintain and clean, a well-tiled toilet increases the value of your house. It is possible to design a space that is both functional and aesthetically beautiful with careful planning and execution.
