Technology of applying liquid wallpaper to drywall

For individuals who want to create a distinctive and fashionable wall finish, applying liquid wallpaper to drywall is a popular option. This kind of wall covering is renowned for being simple to apply and for its capacity to produce a seamless surface with a range of patterns and textures.

It’s crucial to comprehend the precise procedures involved in prepping the drywall and applying the liquid wallpaper before you start. Follow the suggested guidelines to ensure a smooth and durable final result. Proper preparation is crucial.

This post will guide you through every step of the procedure, from choosing the appropriate materials to adding the finishing touches, assisting you in achieving a polished finish that accentuates the beauty of your area.

Is it possible to apply silk plaster to drywall?

The difficulty comes when figuring out the proper way to lay the material when working with surfaces composed of sheets of gypsum board. The truth is that the base’s adherence to the chosen product isn’t always excellent. However, these issues do not occur when liquid wallpaper—also known as "silk plaster"—is used for finishing.

There are two ways to apply this material’s technology. Despite some differences, they both work just as well:

1. Full puttying. This process involves preliminary finishing of the entire surface of the plasterboard. The resulting layer has good adhesion and significantly simplifies the procedure for dismantling the decorative coating, if this is required in the future.
2. Laying without puttying. This method allows you to avoid lengthy surface preparation. Liquid wallpaper on a cellulose or cotton base is perfectly applied to cardboard, providing reliable adhesion, but if it is necessary to remove the decorative layer, a lot of problems will arise. The fact is that the adhesion between the material and the top coating of the gypsum board sheets is very high, so it will be impossible to remove the cladding without damaging the boards.

Finishing plasterboard surfaces with silk plaster works well, as long as the right technology is selected.

Nuances of base preparation

These processes are deemed necessary and call for a cautious strategy to prevent the development of cracks and corrosion stains:

• If the joints of the parts do not have a chamfer or have not been expanded, then a V-shaped seam is formed. To do this, using a construction knife, trimming is carried out at an angle of 45 degrees on each side. It is taken into account that the recess should not exceed 2/3 of the sheet thickness.
• The resulting joints are covered with a deep-penetrating primer. The mixture is applied evenly without excess, it is important to treat all areas.
• It is recommended to cover the screw heads with anti-corrosion paint. The procedure is optional, but in this case the likelihood of stains is completely eliminated.
• A putty solution is prepared, all seams are sealed. If the work is carried out in a house or apartment where shrinkage is observed, then a reinforcing mesh or tape is additionally used. The material must be glued exactly in the center of the joint, then apply the composition and finally align it.

• If the screws were not painted over, then it is necessary to apply a putty solution to the places where they are deepened. Due to the fact that liquid wallpaper fits well on small irregularities, this measure is aimed at preventing rust from appearing.
• To increase adhesion, the surface is primed. This will prevent peeling, which occurs due to contact with fatty substances.

If the drywall surface needs to be shielded in order to remove the decorative coating later on, the base needs to be fully puttied. It needs to be primed after the mixture dries in a thin, even layer.

Guidance! To guarantee that the wall is perfect and that the color of the silk plaster does not fade over time, the surface is painted white. For these purposes, a composition with a water base is used.

The application of liquid wallpaper to drywall is a simple process that yields a seamless, textured finish while being very easy to use. In order to achieve the desired look, this technique entails prepping the drywall surface, mixing the liquid wallpaper per the instructions, and carefully spreading it with a trowel. For individuals seeking to add a distinctive and long-lasting touch to their walls, liquid wallpaper is a great option due to its versatile design and user-friendly nature.

Pasting liquid wallpaper with your own hands

It is advisable to adhere to specific instructions and consider the manufacturer’s recommendations listed on the label, as material laying differs greatly from roll products.

Dilution of the mixture

The solution can be prepared using the following scheme:

1. Pour the mixture into a dry and clean container with a volume of more than 8-10 liters, add the required amount of water at a temperature of about 30 degrees. It is necessary to use distilled or well-settled liquid, in which there are no impurities. The presence of foreign inclusions can spoil the color of the coating and worsen adhesion. The calculation of proportions is carried out based on the instructions.
2. The first mixing can be done using an electric tool, but only at low speed. Then mixing is carried out exclusively by hand so as not to disturb the structure of the material.
3. A little liquid is added until a thick consistency is obtained.
4. The solution is covered with a lid or polyethylene and left for 2-3 hours.
5. The mixing is repeated. If necessary, a little water is added.

Getting a composition that fully satisfies the requirements is crucial. Too liquid of a solution will cause the material to slide and make surface application impossible; too viscous of a solution will make laying challenging because it will not have the required adhesion. Watch the video below if you are unable to determine the solution’s necessary consistency.

Application of the material

Using a transparent trowel and a spatula, distribute the mixture over the plasterboard base. A float can also be used.

1. The solution is mixed and checked for homogeneity.
2. It is recommended to start laying from the outer or inner corner or from the edge of the wall. Distribution should be uniform, creating a single layer. To exclude the formation of visible transitions, all procedures are carried out at one time. If it is necessary to interrupt the process, the edges of the area are rubbed, after resuming the mixture is applied to the already finished place.
3. Using a spatula, the solution is thrown onto the float. The tool is set at a slight angle to the surface, after which the composition is distributed. Unlike work with putty, the process is carried out without strong pressure.
4. An alternative option allows you to glue liquid wallpaper much faster, but this will require experience: the composition is applied with a spatula directly to the wall, and the desired direction is created with a trowel.

Gaps are found by inspecting the surface after the work is finished. One to one and a half hours is all that is needed to remove defects with a small amount of solution.

The composition can be restored for longer periods of time if stored properly, but its minimum shelf life is four to five days.

The process of applying liquid wallpaper to drywall is simple and can significantly improve the appearance of your walls. Proper preparation, such as smoothing the drywall and priming the surface, can yield a gorgeous textured finish that enhances the charm of any space.

The adaptability of liquid wallpaper is one of its main benefits. This material works well on a variety of surfaces and styles, whether you’re covering small flaws or creating a distinctive design. Its simple application further renders it a desirable choice for do-it-yourselfers.

You can have a long-lasting and beautiful wall finish by following the right procedures, which include properly mixing the wallpaper, applying it evenly, and giving it enough time to dry. In addition to adding to the aesthetic appeal of your room, liquid wallpaper is a useful and low-maintenance wall covering.

Video on the topic

How to prepare walls for liquid wallpaper

How to apply liquid wallpaper | Preparing plasterboard walls

LIQUID WALLPAPER and wall decoration Drywall. Easy and simple! How to prepare silk plaster liquid wallpaper

How to prepare a plasterboard wall for applying liquid wallpaper – Comfort Krivoy Rog

LIQUID WALLPAPER, WALL PREPARATION, APPLICATION