Step-by-step finishing of the house inside with your own hands: various options with photos

Making interior home renovations can be a fulfilling experience. In addition to saving money, doing it yourself offers you complete control over the procedure. There are many finishing options to consider, depending on whether you want a modern, rustic, or classic style.

This tutorial will take you step-by-step through the interior finishing process of your house. Everything from material selection to finishing touches will be covered. Professional-looking results are achievable even for beginners with the help of detailed photos and helpful advice.

Every step, from installing drywall to painting and installing flooring, has simple directions. Take a deep breath, gather your tools, and let’s begin building the house of your dreams.

This post will walk you through the process of completely redecorating your home’s interior step-by-step. It will also provide helpful photos to help you explore various options and make the process more enjoyable.

Stages of finishing

Making your own interior décor for your home is a responsible endeavor that calls for thoughtful consideration of all options. The entire process is typically broken down into phases to make the work easier to understand and ensure that each step builds upon the one before it.

This is the general sequence in which complex finishing is done:

1. Ceiling. It is believed that it is with this that you need to start. This is explained by the fact that the likelihood of damage to other coatings is reduced. But any processes with the ceiling surface require a lot of effort and skill; even with significant experience, it is quite easy to damage the walls or floor. If you paint, you will have to carefully cover all adjacent areas, and also more carefully rearrange stepladders, sawhorses and improvised equipment, which can be difficult.
2. Walls. The correct sequence assumes that the walls are finished at the next stage. This situation is justified, because it is with these surfaces that the greatest difficulties arise. Often there is a need for minor repairs to the base, so it is much easier to work if the decorative floor covering has not yet been completed.
3. Floor. Floor work is the final stage; the selected material is laid on top of the previously constructed base. Naturally, if you do this earlier, the likelihood of damage to the coating increases many times over.

Remember that the order is a little different and that the rough finish is finished ahead of schedule. For this reason, when working in inhabited houses, old coverings are often taken apart completely and reassembled from top to bottom. It is recommended, nevertheless, to lay the base from the bottom up. For example, the screed is poured first, and then the walls and ceiling are installed.

Various options for finishing the house

There are many different kinds of interior design that can work for multiple phases at once.

Ceiling finishing

Because working with the ceiling surface is so inconvenient, it is advised to use more practical stands instead of having to move the stepladder all the time. You can use a variety of techniques at work to achieve great results.

Stretch ceiling

This is the most straightforward choice that enables quick completion of the task. If intricate structures are not anticipated, the entire installation procedure takes no more than a single day. But a longer time frame might be necessary because this option is rarely installed on its own.

Be advised that there is considerable debate over which project—installing wall cladding or stretch ceilings—should be tackled first. There is no consensus on this matter; every option has advantages and disadvantages of its own.

Remembering that the canvas is stretched along pre-installed profiles lowers the ceiling height by a minimum of 5 centimeters. It is advisable to give selecting the right option careful thought. For instance, a small room with a glossy, monochromatic ceiling looks gloomy.

One of the best ways to conceal noticeable surface imperfections is through the use of tensile structures. This option is currently very reasonably priced.

Applying plaster or putty

This is a traditional technique that works well for applying a layer that will be covered by additional cladding. Using the textured surface method will also result in a very unique coating after painting. However, creating superior plaster ceiling cladding is a difficult process that calls for expertise.

Painting

This is the easiest way to decorate your home’s interior since it lets you handle everything on your own. The fact that practically any surface can be painted is a crucial point.

• For work, compositions with different characteristics can be used. Water-based products are considered the most preferable.
• Before carrying out work, the surface is carefully prepared. That is why this method takes quite a lot of time in houses where floor slabs were laid.
• The technology involves applying paint in several layers, this will achieve greater uniformity.

On wooden houses, paint goes on nicely because the ceilings are already covered in chipboard.

Plasterboard ceilings

GKL boards are used to create intricate geometric structures and suspended ceilings. Amazing cascades and transitions can be made with the aid of this material. Due to the complexity of this process, accuracy and a well-rounded approach are necessary.

1. A diagram of the future design is drawn. Even a simple and smooth coating requires careful calculation. According to the data obtained, the required amount of material is determined.
2. A frame is erected. The more complex the selected configuration, the more effort is required.
3. Gypsum board is cut into strips that are installed in specified places.
4. The cracks are sealed with putty, and the resulting surface is painted.

GKL boards enable the creation of a unique interior but do not function as a stand-alone decorative material.

Keep in mind that panel and clapboard ceiling cladding are also installed using the frame system. These choices are especially important for individual wooden homes.

Wall decoration

DIY It is impossible to decorate a house’s interior without covering its wall surfaces. There is no need to work in an uncomfortable posture all the time because this procedure is simple.

Wallpapering

The material is reasonably priced and appropriate for ceilings as well as walls. The technology used for installation is fairly basic. It involves slicing the rolls into the necessary lengths of strips, gluing the material and surface, and modifying the designs.

Benefits of this approach:

• Rapidity. If the walls are well prepared, then gluing does not take much time.
• Wide decorative range. There are a great many options for colors, textures, textures, as well as types of products. By decorating the inside of a room with wallpaper, you can decorate even the most boring interior.
• Possibility of quickly replacing tired cladding. Indeed, this does not require much time and effort.

Note that there’s always a fresh selection of wallpaper to choose from (such as liquid or 3D wallpaper), so there’s no reason to think that wallpaper is going out of style.

Paneling

Many products can be used for work; MDF and PVC are the least expensive options. Because these panels come in a variety of widths and lengths, you can sheathe walls all the way to the top. Fixation is usually accomplished via the frame method, though glue can be used to install directly on the base.

However, unique decorative panels that produce a visual volume or 3D effect are especially intriguing. Working with such parts can be challenging as each fragment needs to be precisely adjusted.

Coloring

Although this approach is gradually becoming less common, it is still useful in some circumstances when combined with ceramic tile installation. These techniques, for instance, produce coatings that are relatively simple to maintain, making them ideal for use in kitchens and bathrooms.

Of course, other products could be used to cover the walls. For instance, using decorative stone and particular kinds of plaster is thought to be a great choice.

Floor finishing

A harmonious interior begins with a well-finished floor. Many materials can be used to complete tasks.

Linoleum

If striking a balance between cost and quality is required, linoleum is the material of choice. This product comes in a good amount of varieties and a broad range of decorative options.

Although it’s not the most complicated process, the installation process has the following subtleties:

1. The base is prepared quite carefully, dirt and dust must not be allowed.
2. The surface is treated with specially selected glue. Linoleum is rolled out and pressed well.
3. Particular attention is paid to the joints, which, if necessary, are covered with a strip.

These materials ought to be chosen according to the intended application in order to produce the best possible outcome.

Laminate

One of the most widely used flooring materials is laminate. This is because you can do the work yourself and it’s an excellent decorative piece at a reasonable price. It is crucial to keep in mind that the finished coating is impact-resistant and aesthetically pleasing.

Laminate flooring is a substitute for hardwood floors, which can be rather expensive.

Tiles

To decorate interior spaces, specific tile varieties that can support large weights are employed. Reliability of fixation is ensured by the parts being laid on glue. Setting a single plane can present some challenges because even small variations will stand out.

As a result, it’s essential to decorate the interior of the house in a specific order and to use the options that are best suited for various parameters at work.

Step	Description
1. Wall Preparation	Clean the walls, remove old paint or wallpaper, and repair any cracks.
2. Applying Primer	Apply a coat of primer to ensure better adhesion of the finishing material.
3. Installing Drywall	Fix drywall panels to create a smooth surface for painting or wallpapering.
4. Painting or Wallpapering	Choose paint or wallpaper and apply it to the prepared walls.
5. Adding Final Touches	Install baseboards, trim, and any decorative elements.

Finishing your home’s interior on your own can be a gratifying and satisfying experience. You can fully customize the area and make it uniquely yours by doing so.

Whether you’re interested in more contemporary approaches like paneling and textured finishes, or more conventional ones like painting and wallpapering, there are plenty of options available. Even complicated tasks can be handled well with thorough planning and a methodical approach.

You can accomplish professional-looking results by taking your time and following the correct procedures, and there’s no better feeling of accomplishment than doing it yourself.

Video on the topic

TURNKEY HOUSE REPAIR IN 13 MINUTES. I do everything myself

Interior decoration of the house: correctly and inexpensively – Building a house from scratch. Issue 17

Option for interior decoration of a wooden or country house