The correct primer can make all the difference in the longevity and quality of your wall finishes. Professionals frequently choose Primer VD AK 133-1 because of its strong adhesion qualities and adaptability. What, specifically, sets this primer apart, and how should you use it to get the best effects?
We’ll examine the technical features of Primer VD AK 133-1 in this post and provide a straightforward explanation of everything you need to know. We’ll go over the key information, from composition to application, to help you determine whether or not this primer is appropriate for your project.
We’ll also talk about the usefulness of using Primer VD AK 133-1 when painting. Knowing these essential components will enable you to create a smooth, long-lasting finish that will hold up over time, whether you’re a seasoned pro or a do-it-yourself enthusiast.
| Aspect | Description |
| Composition | A water-dispersed acrylic primer suitable for interior and exterior surfaces |
| Application | Ideal for priming walls and ceilings before painting to improve paint adhesion |
| Drying Time | Dries within 1-2 hours depending on temperature and humidity |
| Coverage | One liter covers approximately 10-12 square meters, depending on surface type |
| Storage | Store in a cool, dry place; avoid freezing temperatures |
| Usage Tips | Apply with a brush or roller in a thin, even layer; ensure the surface is clean and dry |
- All about the product
- Technical characteristics
- Other parameters
- Painting work
- Video on the topic
- SHARING MY EXPERIENCE | Mechanized wall priming
- Betonkontakt primer from A to Z. The fastest way to apply. Main mistakes in work.
- Why primers are needed and how to choose them? Mini-lecture from VGT experts.
- Primer from A to Z: How to choose? MISTAKES in work. CORRECT application methods. Useful tips
- DEEP PENETRATION primer or FILM? Which one to choose? Wall putty.
- What is a primer-paint. What is the difference between primer-paints. Nuances in application.
All about the product
Technical characteristics
The primer VD-AK-133-1, which is a water-dispersion paint with different additives based on acrylic dispersion, has the technical specs listed below.
- When applying the composition to the surface according to TU BY 500021625.090-2007, green, dark steel, dark blue, dark brown, dark red, old red and red colors should be obtained. Deviations are allowed only within the norms established by control color samples.
- The appearance of the coating after its application should be uniform, without corrosion, pores and wrinkles.
- According to the viscometer VZ-246 with a nozzle of 4 mm in diameter at a temperature of 20⁰C ± 0.5⁰C, the conditional viscosity should be equal to 20. The degree of grinding should be at least 20 microns.
- The pH of the paint is from 8 to 10, and the mass of non-volatile substances is about 54%. At a temperature of 40⁰C to 50⁰C, the drying time of the III degree is no more than 10 minutes.
- Adhesion for VD-AK-133-1 is not less than 1 MPa. The hiding power of the composition after drying is not more than 80 g / m 2 . At a temperature of 18⁰C to 22⁰C, the film"s resistance to static water exposure is at least 24 hours. Color fastness is not more than 3∆.
Other parameters
A paint roller can be used to apply the primer.
Using a brush or paint roller (ideally made of wool or mohair) with the composition’s original viscosity, apply this paint-primer to the surface. However, the instructions also permit you to use a spray gun for this; in this instance, the solution must be diluted with water to a viscosity of 18–20 (based on data from the viscometer VZ–246), and the sprayer’s nozzle diameter should be 4 mm.
The acrylic paint VD-AK-133-1 is used in two layers at a temperature between 180 and 210 grams per square meter, with an hourly break in between. The product comes with a six-month warranty from the manufacturer.
In the industrial setting, this primer is used to paint asbestos-cement slate sheets in a protective and decorative manner after they have been heated to between 40 and 50 degrees Celsius.If you choose to paint the slate at home, you can use a brush, but the temperature should not drop below 15 degrees Celsius.
Additionally, this paint is used for interior coatings in high-humidity areas (like the kitchen and bathroom) as well as exterior decoration (pediments, facades). Experience has shown that because VD-AK-133-1 coats walls in ideal adhesion conditions, wallpaper sticks to these surfaces flawlessly.
Additionally, the acrylic primer VD-AK-133-1’stechnicalfeatures render the coating neutral to the development and activity of microorganisms, meaning that it lacks a nutrient medium for organic colonies like rot, mold, algae, moss, and lichens.
The paint’s weather resistance is demonstrated by its ability to withstand temperature fluctuations, precipitation, and UV radiation (it doesn’t deteriorate in sunlight). It also doesn’t burn in any condition, whether it’s liquid or dry.
The VD-AK-133-1 primer must be transported and stored at a minimum temperature of 5°C; therefore, negative temperatures are not tolerated during transportation or storage, even though frost has no particular bearing on the primer’s operational characteristics. For this reason, only heated warehouses are used for storage during the winter, and insulated cars and trucks are used for transportation.
Painting work
In the picture: plaster grouting
Make sure the rough base is suitable—that is, that it is solid (with no loose areas) and free of cracks—before applying the primer to the surface. Furthermore, if this is interior decoration, there shouldn’t be any grease stains, old paint, lime, or wallpaper glue because these things all drastically lower the adhesion properties.
When the putty or plaster is still fresh, you should wait until it dries completely. For putties and rotbands, this process should take no more than a week, but for cement-sand plasters, it should take 28 days.
The most common wooden stick or a piece of thick wire can be used to thoroughly mix VD-AK-133-1 before painting, but if the volume is large, an electric drill clamped with a mixer (a mixer specifically for paint) should be used.
If the event is taking place outside, you should also be aware of the weather. The outside temperature cannot drop below 15°C, and no precipitation—such as rain, hail, fog, or strong winds—is permitted. The composition is filtered through a 0.1–0.2 mesh screen before use (after mixing) (GOST 6513).
Suggestion made. For smooth surfaces like putty, rotband, and cement-sand plaster, a paint roller works best. It is far more practical to use a brush for difficult-to-reach areas or any kind of sprayer when applying decorative plasters.
A dependable and adaptable choice for priming surfaces prior to painting is Primer VD AK 133-1. It has outstanding adhesion, which makes it perfect for guaranteeing a long-lasting, even coat of paint. This post will examine its technical details, like coverage and drying time, and offer helpful advice on how to use this primer to get the best results for your painting projects.
A dependable and adaptable choice for priming surfaces prior to painting is Primer VD AK 133-1. Strong adhesion is ensured by its technical qualities, which is necessary to produce a smooth and long-lasting finish. You can greatly improve the quality of your paint job and increase its resistance to deterioration by using this primer.
It’s crucial to adhere to the suggested guidelines for surface preparation and application techniques when using Primer VD AK 133-1. This will help you avoid common problems like peeling or uneven coverage, in addition to enhancing the primer’s performance. To get the best results, careful application and proper preparation are essential.
When it comes to painting projects, Primer VD AK 133-1 is particularly notable for its efficiency and user-friendliness. Whether applying paint to walls, ceilings, or other surfaces, this primer can assist you in building a strong base for a finish that looks polished. It is an essential tool for any painter’s toolkit due to its dependable performance.
