Plasterboard fireplace lining: features and installation

Many homes are built around a fireplace, which provides warmth and a homey atmosphere. Beyond only practicality, a fireplace’s aesthetic can have a big impact on a room’s design. Plasterboard is a common way to improve its appearance for the lining.

Plasterboard, sometimes referred to as drywall or gypsum board, is a multipurpose material that can give the area surrounding your fireplace a sleek, contemporary appearance. It makes for neat lines and is simple to paint or texture to blend in with the rest of your interior decor. However, in order to ensure durability and safety when working with plasterboard around a fireplace, meticulous attention to detail is necessary.

This post will explain the main characteristics of plasterboard fireplace lining and take you step-by-step through the installation procedure. Knowing these steps can help you achieve a polished look that enhances your home, whether you’re a DIY enthusiast or just curious about the options available.

Types and design of fireplaces

There are now two varieties of indoor fireplaces available:

  • Real ones, which have a functional firebox, a correct chimney design (see.Finishing the chimney outside and inside the house) and are heated by wood, coal and other types of fuel.
  • False fireplaces. They differ in that instead of a real fire in the firebox there will be an electric screen that shows an imitation of a fire flame.It does not require a chimney pipe and other structural elements. The main thing is an uninterrupted supply of electrical energy to the place where the fireplace is connected.

Suggestions. For this kind of design, the only consideration when selecting cladding materials is their functionality.

Application areas of plasterboard in finishing the fireplace portal

Drywall is a versatile material that is used in finishing projects for both surface decoration and leveling. Currently, it is also freely utilized to complete the interior fireplace insert and the exterior fireplace portal.

Recommendation: It is advisable to utilize a fire-resistant variety of this material when finishing the fireplace.

Plasterboard fireplace linings come in a variety of shapes:

  • Square.
  • Rectangular.
  • Rounded.
  • Triangular and so on.

Note: The placement of the fireplace portal is always taken into consideration when selecting a shape.

Plasterboard lining for a working fireplace is essentially done on:

  • Brick surface.
  • Aerated concrete.
  • Foam blocks and other building materials.

Regarding internal structures, it is only feasible to line the fireplace insert with plasterboard in the event that proper and superior finishing with a fire-resistant material is achieved.

This limitation only applies to actual, fully operational, solid-fuel-burning fireplaces. For fake fireplaces, painting the drywall is an easy fix.

Plasterboard fireplace lining combines fire resistance with a smooth, adjustable surface to provide a practical and fashionable way to finish and protect your fireplace. This post will walk you through the main characteristics of plasterboard as a material, such as its versatility in terms of appearance and safety, and will give you a step-by-step rundown of the installation process. This will make it simple for both professionals and do-it-yourselfers to achieve a polished, long-lasting finish around your fireplace.

How to make a fireplace lining using plasterboard

  • Metal profiles for the frame.
  • Dowels and self-tapping screws for fixing it to the surface and connecting all the constituent elements of the structure.
  • A hammer drill for screwing in dowels.
  • A screwdriver for self-tapping screws.
  • A building level for constructing a flat structure on the surface.
  • A hacksaw or metal scissors.
  • Initially, the supporting strips of the frame are mounted vertically on the surface using dowels. Vertical strips are attached to them in a horizontal position and secured with screws.
    All corners and possible overlaps are removed with a hacksaw for metal. The same tool is used to trim and cut the profiles.
  • As soon as the frame is ready, another metal profile is mounted on it with the box facing up, which will serve as the basis for attaching the drywall sheets. Each strip should be in the form of a case.
    In the second construction of the frame, screws and a screwdriver are most often used.

A lathing forms on the surface as a result of these actions. To attach drywall sheets to it, you’ll need:

  • A screwdriver and screws.
  • A building level.
  • A tape measure and a pencil.
  • A stationery knife.
  • It is quite easy to mount the sheets and all the work is done by hand. Using a tape measure and a pencil, the required size is marked on the sheets and cut off with a stationery knife.
  • Then the sheet is mounted on the frame using screws and a screwdriver. You can also use a screwdriver, but the work process will significantly increase in time.
  • Since the corner joints of the material or those that are on the front side of the fireplace portal will be very noticeable, they must be masked.
  • To do this, you will need to make the surface uniform using a putty solution. Such joints are processed with it and after drying, they are sanded with sandpaper.
    Similar actions can be performed with visible screw heads.

Advice: The drywall needs to be wet with water prior to use and set atop a tall object that mimics the shape of the fireplace portal if it has rounded shapes instead of directly proportionate ones. The material will be much easier to mount after it dries.

  • For a fireplace insert, all actions are performed in the same way, but the frame on the surface has its own specific height.

Suggestions. It is important to keep in mind that the firebox inside the structure should be at least 30 cm from each edge of the portal when building a plasterboard fireplace.

Finishing the firebox from plasterboard of an existing fireplace

Only materials that are unaffected by high temperatures and direct fire sources should be used for such tasks. The following materials are most frequently used to line fireboxes:

  • Natural stone.
  • Porcelain stoneware.
  • Ceramic tiles.

What needs to be considered:

  • As a result of the operation of the fireplace, the surface of the materials can become covered with soot, but it is quite easy to clean it with a damp cloth.
  • Materials are mounted only with strong and fire-resistant glue. Each of these types of finishing has its own specific means for mounting in the fireplace insert.

For the task at hand, you’ll need:

  • Adhesive.
  • Spatula.
  • Container for mixing the product.
  • Building level.
  • Tile cutter.
  • Roulette and pencil.

Take note! Painting a plasterboard fireplace is not advised because the paint cannot resist being exposed to direct flames.

Topic Details
Material Plasterboard is easy to cut and shape, making it ideal for customizing fireplace designs.
Installation Install the plasterboard on a metal frame, ensuring it is secure and level before finishing.
Finishing Once installed, the plasterboard can be painted, tiled, or textured to match your room decor.
Safety Always use fire-resistant plasterboard around fireplaces to ensure safety.

Plasterboard is a useful and adaptable material that can be used to finish a fireplace and provides both practical and visual advantages. It enables you to design a sleek, tidy appearance that is simple to paint or embellish to blend in with the rest of your decor. It also aids in concealing any unsightly wires or structural components, providing a polished, polished look for your fireplace.

Using fire-resistant plasterboard is essential when putting it around a fireplace. By doing this, you can be confident that your installation is sturdy and safe, capable of withstanding the heat produced by the fireplace. The actual installation procedure is simple, but precise measuring and cutting are needed to guarantee that the plasterboard fits firmly and securely.

In the end, plasterboard fireplace lining is an elegant and reasonably priced fix that can improve the appearance of your living area. Your fireplace can become the focal point of your house with a finish that is both aesthetically pleasing and safe, achieved with the correct materials and careful installation.

Video on the topic

Assembling a fireplace. Personal experience // FORUMHOUSE

Installing a fireplace from plasterboard with your own hands.

A GORGEOUS FIREPLACE WITH YOUR OWN HANDS. Part 1. Fireplace insert

Installing a corner fireplace in a wooden house | Installation of a Romotop fireplace insert and cladding on a turnkey basis!

Fireplace made of plasterboard or calcium silicate?

DIY fireplace. How to make a false box for cladding in a modern style?

How to install a fireplace? Compact installation of a fireplace insert in a private house.

Fireplace cladding, difficulties, mistakes, finished result.

What interior style do you like the most?
Share to friends
Veronica Gerasimova

Interior designer, author of books on the design of residential premises. I will help you make your home not only functional, but also beautiful.

Rate author
Vash-Variant.com
Add a comment