Whether you’re moving, redecorating, or simply altering the arrangement, there are occasions when you need to take a plastic or metal dowel down from the wall. Although it may appear difficult at first, you can manage it on your own if you take the appropriate approach.
It’s critical to understand the necessary tools and steps before beginning. This will help you avoid damaging the wall and make the job easier overall.
With the help of this guide, you will be able to remove dowels with ease and confidence by understanding the necessary tools and techniques.
- When it is necessary to pull out
- What is the best way to pull it out?
- Metal
- Plastic
- Sequence of work
- Video on the topic
- ELECTRICIANS KEEP IT A SECRET, how to fix a wire to a wall WITHOUT a dowel tie
- Types of dowels and their application do-it-yourself repair
- How to get a plastic dowel out of a wall ✔ how to pull out an old dowel from a concrete wall
- How to pull out an old dowel from a wall
- Fischer DUOPOWER dowel in the section behind glass)
- EVERY MASTER SHOULD KNOW ABOUT THIS! What to do if, when drilling a hole in a wall, you hit a void
- HOW TO INSTALL A METAL DOWEL "MOLLY" INTO A DRYWALL WALL WITHOUT A SPECIAL GUN
- Remember this trick for finishing a hammer drill for smooth drilling
When it is necessary to pull out
Navigating pages
When a dowel is not needed, it must be removed from the wall because it causes interference. Say this:
- Before gluing wallpaper, you need to prepare the surface, and the dowel sticks out. Then use one of the removal methods.
- Painting the walls. In this case, the surface must be perfectly flat.
- Previously, there was a picture on the wall. Now there should be a super-flat TV, which fits tightly to the surface. In this case, it is necessary to remove interfering objects.
- Wooden dowels are used in the design of window frames. They hold the window sill, window frame. When removing an old window to insert a new one, it is necessary to remove all components.
There are several circumstances in which a plastic rod is not required. It is worth using some tools and mixtures to remove, and it is not difficult.
What is the best way to pull it out?
There are five different ways to remove an obstruction. A few spare hours and a set of tools are needed for each of them.
- The object sticking out above the surface is driven into the wall. For this, use a hammer, center punch, spatula, putty. The center punch must be placed on the protruding object and gently tapped with a hammer. After this, putty the resulting hole.
- Pull out the protruding plastic with nippers, pliers. If you pull it, nothing will work. You need to pull it towards yourself and at the same time shake it from side to side. Putty the resulting hole.
- Melt with a soldering iron. This method is applicable when the plastic component is broken. The melted plastic is easily removed or driven into the wall.
- Use a metal tube. You need to find a pipe that is suitable in size with the plastic diameter. The pipe is stuffed onto the rod and taken out.
- Using a drill and a drill of the required length equal to the dowel. Make several holes around the interfering object with a drill. After this, the rod begins to wobble and it is easy to grab it with pliers or nippers and pull it out.
Metal
A metal dowel requires additional tools for installation. Pulling such an object out of the wall will be challenging because it is fixed in place. The dowel hole needs to be made wider. You can do this by punching it or using a hammer, and then slowly releasing it to pull it in your direction.
If the sleeve is not protruding above the surface, you will need to remove some plaster and use a drill bit to create holes around the object. Next, extract the rod by grabbing it with pliers.
Should these techniques prove unsuitable, the projecting portion may be severed using a grinder. However, keep in mind that metal components rust and leave a mark on the finish coating.
Plastic
A plastic object is far easier to pull out. The following techniques are suitable:
- Find a screw that will fit tightly into the socket. Screw it in, but not all the way. Then grab it with pliers, pull it towards you, shaking it a little.
- If there is no suitable screw, take a regular corkscrew. Screw it in, and then pull it towards you.
- Use a drill to make 3-4 holes around the point where the object is inserted. Then carefully, shaking it a little to the sides, pull it towards you.
- Cut off the cap sticking out above the surface, and cover the place with putty.
Yes, you can use basic tools like pliers, a screwdriver, or a drill to remove a plastic or metal dowel from the wall by hand. It’s an easy process, but you have to handle it carefully so as not to break the wall. To ensure a simple and clean removal, we’ll guide you through the process in this article and suggest the best tools for the job.
Sequence of work
You’ll need the following instruments to take the dowel off the surface:
- screw or corkscrew;
- hammer, punch;
- pliers or flat-nose pliers, nail puller;
- construction knife, chisel;
- soldering iron;
- grinder.
You only need the tools needed to remove the object, depending on the method you choose.
Parts of the wooden object are removed. Using a hammer and chisel, it needs to be broken into pieces. Next, extract the leftovers.
You take out the plastic dowel with a screwdriver or corkscrew. If that still doesn’t work, you can drill holes or simply leave it in the wall without removing the cap.
Metal rod. Using a grinder, the portion protruding above the surface is removed. Alternatively, you must tap milk onto the portion that sticks out from various angles. It will come loose and be very simple to take off. The additional hole method can also be used.
Tool | Purpose |
Pliers | For gripping and pulling the dowel out |
Screwdriver | To screw in a screw for easier extraction |
Drill | To loosen the dowel by drilling around it |
Utility knife | To cut around the dowel if it’s stuck |
Needle-nose pliers | For handling smaller dowels |
It is totally feasible to remove a plastic or metal dowel from the wall by yourself, especially if you have the appropriate tools on hand. Patience and accuracy are essential when working with dowels, whether they are more flexible plastic or a stubborn metal one.
A screwdriver or a pair of pliers will usually work fine, but other specialized tools like a drill or a screw extractor can facilitate the process. It’s important to evaluate the situation before beginning because the method may change based on the kind of dowel and the type of wall material.
Ultimately, being able to remove a dowel correctly will save you time and spare your walls from needless damage, leaving you with a clean surface prepared for whatever comes next.