A common question among homeowners is whether wallpaper can be placed directly on whitewashed walls. This question comes up frequently when renovating and removing old whitewash seems like a big undertaking. The good news is that it is feasible, but in order to guarantee that the wallpaper adheres correctly and endures over time, there are crucial steps to take.
Although whitewash, a conventional and widely used wall finish, can produce a uniform and smooth surface, it is not the ideal foundation for wallpaper. If the wallpaper isn’t prepared properly, it can peel or get bubbles. But you don’t have to completely strip the whitewashed surface to get it ready for wallpapering—just follow a few simple steps.
This post will walk you through the steps of prepping a whitewashed wall for wallpaper application, including what supplies and tools you’ll need and how to get a polished look. You can save time and effort and make sure that your wallpaper looks fantastic and stays in place by adhering to these easy tips.
Can you glue wallpaper on whitewash? | How to do it right |
Yes, it"s possible, but not recommended. | First, remove loose or flaking whitewash. Then, apply a primer to ensure better adhesion. Finally, apply wallpaper glue and hang the wallpaper carefully. |
What happens if you don"t prepare? | The wallpaper may peel off or form bubbles, as whitewash is not a strong surface for adhesion. |
- Is it necessary to remove whitewashing
- Preparatory work
- What is required
- Priming
- Wallpapering
- Video on the topic
- How to prepare a painted wall for wallpaper. Priming walls for wallpaper
- 🏠 Is it possible to GLUE wallpaper on WHITEWASH? 💮 Which WALLPAPER is better to choose?
- Glue WALLPAPER on OLD putty. What is the danger?
- Repair wallpaper pasted walls whitewashed
Is it necessary to remove whitewashing
You need to take a close look at the walls before you glue wallpaper for whitewashing. If the material has cracks, potholes, or is crumpled in any way, it is preferable to remove the whitewashing rather than glue wallpaper on top of it. Leave the base in place if it is sturdy and free of obvious flaws.
Be aware of this! Using rolled materials that are extremely dense is unacceptable. The fact is that whitewashing will always smoke a little, and it will separate if the finishing material is applied excessively.
Preparatory work
In order to apply wallpaper for whitewashing with superior quality, there are several preparatory steps that must be completed.
What is required
First things first, get your supplies and equipment ready:
- Wallpaper. Winsella with a density of about 210–220 g/ sq. m.
- The adhesive composition is selected depending on the type of wallpaper.
- Narrow and wide brush. The first is needed for gluing the joints, the second – for applying glue.
- Rubber spatula and rollers for smoothing the roll material and removing air bubbles.
- Stepladder or comfortable stool.
- Stationery knife.
- Rags.
- Container for preparing the solution.
Priming
It is essential to apply a primer mixture to the coating before adhering the wallpaper. If not, it might come off. Furthermore, the primer will shield the coating from the growth of mold and fungus. There are a tonne of options available on the contemporary construction market for this material, but the acrylic variety is the better choice.
Therefore, you should apply primer to the roller or brush before applying the composition to the area that needs to be treated. Try to complete this in a single layer and stroke. It is then advised to repeat the process after waiting for the composition to absorb for three to four hours. Wallpaper cannot be glued onto lime until the coating has fully dried.
Yes, wallpaper can be adhered to whitewashed walls using glue, but careful preparation is needed to guarantee long-lasting adhesion. To achieve a solid, smooth surface, the whitewash needs to be taken off or treated. This include scrubbing, priming, and occasionally even plastering over the mess. You can successfully apply wallpaper to whitewashed walls to create a new, long-lasting finish by following the right procedures.
Wallpapering
Actually, the technology used to wallpaper over whitewash is essentially the same as that used to finish any other base. Guidelines for applying wallpaper:
- Select a vertical reference point and, taking it into account, apply markings along the height. It is applied using a ruler and a marker or pencil and is checked with a laser and regular level.
- Roll out the material on the floor and cut it into fragments of the required length. It is better to leave a reserve, since the excess can be removed, and gluing the missing is problematic.
- Prepare wallpaper glue. To do this, you need to follow the manufacturer"s instructions. Usually, the dry mixture is poured into a clean container, then slowly add water, stirring constantly. Then you should leave the solution to infuse for 15 minutes, then repeat the stirring.
- Apply glue to the wall and the back of the wallpaper (if required by the technology).
- Strictly according to the markings, lean the first piece of material against the wall. To avoid problems with peeling parts of the covering later, you need to carefully smooth the pasted materials with a rubber roller or spatula. During the smoothing process, glue will appear from under the surface, it must be quickly removed with a rag or sponge.
- Glue the second fragment taking into account the vertical of the first. It is important to correctly design the seams: paper wallpaper is attached with an overlap, all the rest – end-to-end.
Note: It is recommended to cut and join any patterns on the wallpaper during the preparatory stage to prevent problems when pasting.
Although it can be difficult, adhering wallpaper to a whitewashed surface is not impossible. The secret to success is being well-prepared. The wallpaper won’t stick properly and may eventually peel off if the whitewash is shaky, flaking, or chalky. As such, it is imperative that you take the time to evaluate the state of the whitewash.
To get rid of any dust or residue, if the whitewash is in good condition, a thorough cleaning is necessary. A primer can be used to improve the wallpaper adhesive’s ability to adhere to the wall after cleaning. It’s also a good idea to test a small section of the wall before covering the entire wall to make sure the wallpaper adheres correctly.
It’s usually advised to remove the whitewash entirely for the best results, particularly if it’s thick or uneven. In the long run, this extra work can save time and frustration by giving your wallpaper a smoother, more resilient finish. Wallpapering over whitewashed walls can produce a stunning and long-lasting effect if you prepare carefully.