You may be wondering what kind of adhesive is best for installing drywall. Some people think about using assembly glue, but is it a wise decision, or is a specialized GKL glue a better option? Understanding the benefits and drawbacks of each option will help you choose the best one for your project.
Although assembly glue is a common adhesive with a wide range of applications, it might not always be the best option for installing drywall. Conversely, GKL glue is made especially for this kind of work and has qualities that can help your drywall application last longer and work better.
This post will compare and contrast these adhesives, go over how to apply them properly, and offer advice on how to make your drywall project a success. Whether you’re a professional or a do-it-yourself enthusiast, having the right knowledge can make a big difference.
- How to glue drywall to a wall
- Cladding with plasterboard sheets: advantages
- When can you glue drywall to the wall without a profile
- How to choose the right gypsum board glue for gluing gypsum
- Is it possible to glue with mounting foam
- Adhesive for walls made of foam blocks
- From polystyrene concrete
- For wooden walls
- For walls made of brick, concrete
- Gluing the first sheets
- Playing with drywall of the corners
- Grout of the seams
- What can be glued to smooth plasterboard walls?
- Video on the topic
- Glue-based plasterboard WE BUILD FOR OURSELVES
- How to glue drywall to a wall exactly in a plane
- Gluing drywall to the wall using ilmax mounting adhesive
- what composition is best for gluing drywall to walls #repair #drywall
- How to PROPERLY glue plasterboard??? Discussion of KNAUF technology. Which method is the BEST?!!!
- TYTAN Professional. How to mount a sheet of drywall on a wall.
- How to evenly glue drywall to a wall using glue. We glue quickly, efficiently and evenly.
- Frameless drywall fastening
How to glue drywall to a wall
Navigating pages
Plasterboard is used to level the surface of walls and ceilings.
Make a frame base out of profiles and other materials to accomplish this. There is a way to cover walls without a frame, though, in order to level the walls. This article explains how to use the proper adhesive to glue drywall to a wall.
Cladding with plasterboard sheets: advantages
In the following situations, HA sheets are faced:
- surface leveling;
- improved heat and sound insulation;
- hide wires and pipes;
- surface decoration – creating niches, shelves, design with figured elements.
Plasterboard sheets are flat on the surface and do not distort when affixed to a wall. This makes painting, tiling, and wallpapering later on easier.
Gypsum board types that are used in high-humidity and high-temperature rooms include the following:
- An ordinary room with moderate temperature differences – a gray sheet of gypsum board.
- Wet room: bathroom, hallway in a private house, balcony, attic, kitchen – green sheet of GKLV.
- A room with a working fireplace, Russian stove, with a rough stove – pink GKLO.
Sheets can be attached to the surface using two different techniques: frameless and frame. In the initial instance, profiles are relevant. You must select the appropriate adhesive composition for the second method.
Benefits of adhering gypsum board to the exterior:
- installation is easy and quick;
- less expensive method compared to frame;
- this method does not take extra centimeters.
The inability to conceal cables and communications behind the sheathing is a drawback.
When can you glue drywall to the wall without a profile
Gypsum boards can be glued in the following circumstances:
- small rooms where every centimeter of space is important;
- the unevenness of the wall is up to 5 cm;
- when gluing drywall to the ceiling, you need to choose a good glue and make additional fixation with screws;
- finishing slopes.
Can glue be applied to uneven walls?
Installing plasterboard over a prefabricated frame is one easy way to level a "falling" wall.
Use the sheet-gluing method if the difference in the wall’s unevenness is minimal. It’s important that you become familiar with the guidelines and nuances before using this technology.
- You need to select the type of gypsum and adhesive composition in accordance with the humidity and temperature conditions in the room.
- The frameless method is applicable if the wall has an unevenness of a maximum of 5 cm.
- When carrying out installation, you need to follow the step-by-step instructions with all the rules.
- To select the glue, you need to pay attention to the material of the rough wall.
The installation of gypsum board on glue should be simple and long-lasting if all the guidelines are followed.
There are two primary methods for attaching drywall to walls: special drywall adhesive or assembly glue. While special drywall adhesives are made specifically to provide a stronger and more dependable bond, assembly glue can provide a quick and simple fix. In addition to weighing the benefits and drawbacks of each approach, this article provides helpful guidance on selecting the right adhesive, applying it correctly, and taking other important aspects into account to guarantee a successful drywall installation.
How to choose the right gypsum board glue for gluing gypsum
Plasterboard sheathing of walls requires careful selection of the adhesive composition. The mixture is chosen taking into account the ambient conditions. Stroy Market provides blends:
- Gypsum adhesive "Perlfix" by KNAUF or "Volma-montazh".
- Gypsum-based plaster: "Start", "Finish".
- Gypsum-based putty "Knauf-fugen".
- Tile adhesive "Ceresit-SM 11". This is a cement composition with fillers.
- Silicone sealant made of acrylic and polyurethane, "liquid nails", mounting adhesive mixture. These mixtures are used for flat surfaces or for gluing sheet to sheet.
- Mounting foam. Select a composition with a coefficient of "min".
Sealants are primarily applied to concrete walls, brick, and foam blocks.
Is it possible to glue with mounting foam
A sheet of material can be adhered to a wall using foam in one of two ways:
- First, attach the gypsum board to the wall with dowel nails, then make holes and fill the void under the gypsum through them.
- Apply foam to the sheet and stick it to the wall.
The substance is spread out across a level, horizontal surface. Drilled in are nine or twelve holes. Following the application of hole-drilled gypsum board to the wall, each drilled hole is marked with a pencil. On the rough coating, dowel holes are visible.
To secure the gypsum board, dowel nails are used. The screw does not need to be inserted all the way. Using a level when screwing in is necessary to ensure that the material placed vertically is even. Foam is allowed to enter the holes in the exposed sheet.
The foam is applied to the gypsum board, which is positioned horizontally, if the wall is even. Subsequently, the sheet is affixed to the wall, evened out, and compressed to seal the foam into place.
Is tile adhesive suitable for gluing gypsum board?
Tiling adhesive is used to adhere gypsum board, but only if there is a 1 cm unevenness in the wall. If the unevenness is greater than 1 centimeter, the adhesive will eventually come off of the gypsum board sheet as well.
Gypsum board sheets are additionally fastened with dowel-nails or self-tapping screws for increased strength.
If you need to create a double layer of gypsum board sheathing, use glue that is between 0.3 and 0.5 mm thick for the first layer, and then apply the same amount for the second plasterboard once it has completely dried. An additional screw fixation is a requirement.
Adhesive for walls made of foam blocks
"Perlfix" is the best adhesive option for a wall constructed of foam blocks. Holes with a diameter of 2-2.5 cm and a spacing of 40 cm are made in the gypsum board. The wall is covered with adhesive. Subsequently, the gypsum board is glued right away. The holes created will allow any extra glue to escape. It is taken out using a spatula. By using this technique, more reinforcement is obtained.
From polystyrene concrete
The ingredients of polystyrene concrete are cement, additives, foam balls, and quartz sand. It is necessary to use adhesive mixtures on a cement base with fillers for a wall composed of this composition. The base contains a negative point where it freezes. Dowel nails must thus be added for additional stability in order to hold the wall finish in place.
For wooden walls
The following methods are used to cover wooden walls:
- Treatment of wood with an antiseptic.
- Setting up beacons for the evenness of the applied sheet.
- From the beacons at 30 cm make holes and insert a plastic sleeve from a dowel-nail.
- GKL sheets are glued with an adhesive mixture. Additionally fixed with dowel-nails.
Note: The rough surface needs to be primed before applying glue.
For walls made of brick, concrete
There are four ways to fix GKL to concrete and brick walls:
- Fixing with glue.
- Facing with mounting foam.
- Using self-tapping screws.
- Fixing with dowel-nails.
The wall’s curvature and humidity level influence the method of choice.
Wall made of concrete. Use cement-based glue; it’s primarily smooth. In order to improve adhesion, the wall is primed, notched, and then the GKL is fixed.
Block wall. Mounting foam is used to secure the facing material. You may regulate how much of the applied product is applied by applying foam to the sheet in a snake-like pattern. You should give the sheet a couple of minutes to fully set after adding the foam. The sheet is affixed to the wall and leveled once the foam starts to expand.
What do you need to prepare a plasterboard wall with?
Materials and tools needed to attach the plasterboard to the wall are as follows:
- The selected type of plasterboard – moisture-resistant, regular.
- Dowel-nails, self-tapping screws.
- The selected glue for fixing the sheets.
- Perforator, construction mixer.
- Plumb line, rule, sharp knife, level.
- Container for preparing glue, spatula.
- Primer, roller, brush.
Once you have acquired all the required tools and materials, you must prepare the uneven surface.
- Clean the wall from old cladding, wallpaper, paint.
- Existing cracks must be reinforced and putty. Seal all holes with a solution based on cement or gypsum.
- Coat the surface with a primer.
Get the gypsum boards ready after the primer dries. Perforate them to accommodate switch sockets.
The adhesive mixture needs to be properly prepared for high-quality wall finishing:
- Pour the specified amount of water into a clean container.
- Pour a little dry mixture into the water and stir.
- After this, pour in the specified amount of dry mixture and slowly mix with a mixer.
Step-by-step instructions for plastering a wall at home
You can now move on to installation after preparing the rough walls and the gypsum board fixing solution. There are three ways to adhere sheets together:
- Applying glue in a continuous layer using a notched trowel. Used for concrete walls.
- Applying glue in small heaps.
- Using beacons and lining with foam plastic (gypsum pieces). For very uneven walls.
Every technique can be used depending on how even the uneven wall is.
Gluing the first sheets
The plasterboard sheet is positioned across from the location where it will be fixed on long wooden slats. The sheet is covered with a thick layer of adhesive.
Subsequently, the glue-bonded gypsum board is carefully lifted onto the wall. The holes are used to thread wires through. Raise the sheet 10 mm above the floor; you can use a piece of plasterboard to help with this. Place in line with the wall. The level and the rule based on the diagonal, vertical, and horizontal are used to measure smoothness. They are pressed up against the wall after the GCL is placed, and the evenness is checked once more. It is important to secure glued drywall with support.
Only after the glue has grasped beneath the first sheet is the second sheet glued. It follows suit in equal measure.
Playing with drywall of the corners
The inner angle is where you start when playing the wall with finishing material. Overlapping pieces of drywall are glued to the wall next to it.
The distance from the corner to the glued sheet must be measured in order to overlay the outer angle, and the measured distance must be carefully cut off from the entire GCL. This glue-cut portion is positioned in the corner and plumb and level.
In order to seal the end of the drywall that is glued to the corner 900, the next cut portion is placed on the angle.
Grout of the seams
Following the wall’s lining and the glue’s full drying time, several tasks aimed at strengthening the joints must be completed. To carry out this:
- Cover the entire surface with primer. Prime all joints with a brush.
- After the primer mixture has dried, putty for joints is applied to the joints. Reinforcing tape is glued onto it and covered with the same putty on top. If self-tapping screws or dowel-nails were used, then all fastening points are covered with the same solution.
- When the putty has dried, grout with sandpaper to remove all small excess putty particles and smooth out the seams.
Before finishing, the entire surface must be filled and primed.
What can be glued to smooth plasterboard walls?
You can decorate plasterboard walls however you like. Glue tiles, if these are the bathroom walls. Painting is less common in rooms with decorative plasterwork or wallpaper.
If you are familiar with all the ins and outs of the process, you can glue drywall to an uneven wall. When a precise formula is followed and the adhesive is chosen appropriately, the gypsum board’s structure can endure for up to 15 years.
Options | Description |
Assembly Glue | Assembly glue can be used for attaching drywall, but it’s less specialized and may not provide as strong or reliable a bond as GKL glue. It’s suitable for smaller projects or where other methods aren’t feasible. |
GKL Glue | GKL glue is specifically designed for drywall installation. It offers a strong, durable bond and is recommended for most drywall applications. It ensures better adhesion and stability for large areas or heavy panels. |
Application Method for Assembly Glue | Apply assembly glue in vertical strips on the wall or drywall. Press the drywall firmly against the wall and hold it in place until the glue sets. Ensure the glue is evenly distributed to avoid weak spots. |
Application Method for GKL Glue | Apply GKL glue in a zigzag pattern or horizontal strips on the wall or drywall. Press the drywall into place and secure it with screws or supports if necessary. GKL glue often requires specific curing times, so follow the manufacturer"s instructions. |
Recommendations | For best results, use GKL glue for drywall installation, especially for larger or more demanding projects. Assembly glue can be a temporary solution or for smaller tasks. Ensure proper surface preparation and follow the glue manufacturer’s guidelines for application and curing. |
Requirements | Both types of glue require clean, dry surfaces for optimal adhesion. Make sure to follow any specific instructions related to temperature, drying times, and surface preparation to achieve the best results. |
For drywall installation, selecting the appropriate adhesive is essential to guaranteeing a strong and long-lasting bond. Although assembly glue can be an easy and convenient solution, it frequently does not offer the durability required for drywall applications. This kind of glue might not provide the strength or longevity needed to hold the drywall firmly in place, particularly in locations that are prone to moisture or heavy traffic.
But specialized GKL (drywall) glue is made just for this kind of application. For the majority of drywall installations, it is a better option because it offers a stronger and more resilient bond. GKL glue is designed to stick to wall surfaces and drywall equally well, giving a more stable fit and lowering the possibility of future issues.
Take into account the installation area’s conditions as well as the particular requirements of your project when choosing an adhesive. Choosing the appropriate glue extends the life of your drywall installation and facilitates a smoother finish. Purchasing GKL glue is a prudent choice that offers benefits in terms of performance and longevity for the majority of applications.