How to paint chipboard furniture with your own hands

Painting chipboard furniture can give worn-out or outdated pieces a new, personalized look that goes with your decor. With a few simple tools and techniques, painting chipboard is a rewarding do-it-yourself project that you can use to update an old cabinet or add a personal touch to a new piece.

Particle board, sometimes referred to as chipboard, is a common material because of its affordability and adaptability. However, because of its porous surface, painting it can be difficult. Furniture can be restored to its original appearance with a smooth, long-lasting finish that can be obtained with the appropriate paint and preparation.

This tutorial will take you step-by-step through the entire painting process of chipboard furniture, from prep to final touches. You can make a gorgeous piece that elevates your room out of your furniture with a little perseverance and attention to detail.

What is needed for restoration

What could be simpler, it would seem, than painting an old cabinet with paint and a brush?

Actually, adhering to a specific painting technology is required in order for the new coating to lie flat, adhere well to the surface, and last for a long time on it. And everything matters in this situation, right down to the finishing layer application and tool selection.

Tools and consumables

The first step in getting ready for work is to consider the design. Furniture can be painted in various colors, painted, or artificially aged, or it can just be covered with a fresh coat of paint. This will determine which tools, paints, varnishes, and other supplies are needed.

Whatever the case, the following instruments will be required:

  • Brushes of different sizes or rollers with short nap (see. Paint rollers: let"s consider in detail);
  • Screwdriver or screwdriver;
  • Fine- and coarse-grained sandpaper;
  • Spatula;
  • Paint tray;
  • Gloves;
  • Rags.

You might also require artistic brushes, masking tape, fresh furniture fittings, stencils, stamps, and other supplies.

Finishing and paints and varnishes

Select the paint to use for painting chipboard furniture. The best furniture varnishes and enamels are made specifically for this use, though they don’t have to be. Oil, acrylic, and alkyd enamel paints, including aerosols, should all lay smoothly on a surface that has been prepared.

Suggestions. Select paints and other paint-related supplies exclusively from reputable manufacturers, like Dulux, Tikkurila, Yaroslavl Paints, Raduga, Rastsvet, and Tex. Although they cost more, their coloring quality and coating’s longevity cannot be compared to the same qualities of inexpensive compounds from an unidentified source.

Water-soluble acrylic paints are the safest and greenest option; they can be tinted to any shade with the use of specialty pigments. It is best to use the furniture you are repainting if it is for a child’s room. However, painting is not sufficient for restoration projects.

Furthermore, you will probably require:

The original condition of the furniture, the freshness and thickness of the paint, and the requirement or option for varnish determine the remaining steps.

The required amount can be easily determined by multiplying the area to be painted by the number of layers to be applied, dividing the result by the average consumption. This attribute is listed on the label along with usage guidelines for the mixture.

It’s simple to paint your chipboard furniture yourself to give it a new look. To make sure the paint adheres properly, start by washing and sanding the surface. After priming the surface to make it smooth, select a paint that is appropriate for chipboard and apply it in thin, even coats. Your furniture will look brand new after completing this easy procedure.

Painting technology

It is incorrect to simply open the paint, dip a brush into it, and begin painting. There are a few things you should do in advance of repainting laminated chipboard furniture.

Preparing surfaces

You should take the cabinet or chest of drawers apart first. Not totally, but take out the drawers, take out the doors, and unscrew every fitting. Check the degree of preservation of the hinges and other components at the same time. It can be necessary to replace them.

Next, every component needs to be ready for painting:

  • If it is necessary to remove the old paint layer, clean it with coarse sandpaper, then bring the surface to a smoothness of fine. If this layer is smooth, without peeling and scratches, and you just want to change the color of the furniture, you can skip this step.

Suggestions. Paint removal by scraping is a labor-intensive and dusty process. An alternative method is to use a building hair dryer to heat up the paint layer and then use a metal spatula to scrape it off. Additionally, there are specific washes that must be used exactly as directed.

  • The next step is cleaning the surface from dust and degreasing it. To do this, wipe it with a damp cloth, then wipe it with a solvent.
  • If there are pits, unevenness and cracks on the front side of the furniture piece, they need to be filled with acrylic putty for wood, let it dry and smooth it out with the finest sandpaper. Of course, the resulting dust is removed.

  • The last preparatory stage is applying a primer in one or two layers, depending on the degree of absorption of the base. Each layer should dry well before you apply the next one or paint.

Eliminate the winding in the air and the layer that is lying on the dust surfaces before starting to primer the furniture. particularly if you’ve decided to apply varnish or tinting to antique furniture as a decorative finish.

Painting furniture from chipboard

We’ve already discussed what paint you can use to paint chipboard furniture. However, the steps depend on which one you’ve selected and how the paint is prepared. In the event that this is an aerosol, shake the spray thoroughly before using. To prevent the paint from discoloring other surfaces, the furniture component is placed on top of a layer of old newspapers or film.

Use a multi-layer gauze bandage or a respirator when handling alkyd compounds.

Overly thick oil paints, enamels, and varnishes are thinned with a solvent (acrylic with water) to the appropriate consistency.

Regardless of the painting technique, the first background layer is applied using a brush or roller to the whole surface and is allowed to dry. The label specifies the drying time.

Apply the second layer if it’s a single-color painting and the base color peeks through beneath the first layer. And varnish once it has dried. Even so, you don’t really need it.

If you choose to paint the furniture facade in multiple colors, the border between each color is covered with masking tape, which is carefully removed once the colored area has dried.

They use stencils in a similar manner to apply an ornament or pattern.

The pieces must be allowed to dry for a few days following painting in order for the coating to become stronger. And only then move on to fittings installation and furniture assembly.

Step Description
1. Clean the Surface Remove dust and dirt from the chipboard furniture using a soft cloth or a vacuum cleaner.
2. Sand the Surface Lightly sand the furniture with fine-grit sandpaper to create a smooth surface and help the paint adhere better.
3. Apply Primer Use a primer suitable for chipboard to ensure even paint coverage and improve paint adhesion.
4. Paint the Furniture Apply paint using a brush or roller, working in thin, even coats. Allow each coat to dry before applying the next one.
5. Seal the Paint Once the paint is completely dry, apply a clear sealer to protect the finish and increase durability.

Painting chipboard furniture can be a satisfying do-it-yourself project that breathes new life into worn-out pieces and gives your house a unique flair. The right procedures, from priming and painting to cleaning and sanding, can help you achieve a polished finish.

To guarantee the best outcomes, don’t forget to take your time at each step. Careful paint application and patience during prep work will result in a smooth, long-lasting surface that improves the look of your furniture.

You can create gorgeous, personalized pieces that perfectly complement your decor out of chipboard furniture with a little work and attention to detail. Savor the procedure and the fulfillment that comes from a job well done.

Video on the topic

How to paint a polished cabinet.Bought on AVITO.What we had to deal with.DIY.Tips.

How to repaint chipboard furniture / Remaking a cabinet / Detailed instructions | VeneraDIY

DIY New life for an old table / How to repaint a table, cabinet and other furniture made of chipboard / Remaking a table

What interior style do you like the most?
Share to friends
Dmitry Stepanov

Professional decorator with 10 years of experience. I know everything about renovating apartments, houses and offices. I will be happy to share my knowledge and experience with you.

Rate author
Vash-Variant.com
Add a comment