How to make an arched opening in the wall of an apartment or house: guide, tips, tool

Your house can look completely different by making an arched opening in a wall, which will also add elegance and charm to the area. An arched opening can be a great project to take on, whether you’re creating a new architectural feature or updating an outdated design. This tutorial will lead you through the process of creating an arched opening in your home or apartment, providing helpful hints and necessary equipment to ensure the job is done correctly.

First and foremost, thorough planning is crucial. Determine the desired size and shape of the arch by taking measurements of the current wall. A well-defined plan will facilitate and simplify the actual construction process. Be sure to take structural factors into account, and seek professional advice if you have any doubts about how the changes will affect the stability of your house.

After you have a plan, collect the equipment and supplies you’ll need. A level, a measuring tape, a jigsaw or reciprocating saw, and possibly an arch template are among the tools you’ll need. With the aid of these tools, you can precisely cut the opening and guarantee that the arch is perfectly aligned.

Making an arched aperture can be a satisfying do-it-yourself project if you have the correct supplies and preparation. If you carefully follow the instructions, your home will have a stunning new feature that improves the overall appeal and design.

Guide for self-installation of an arched opening in a wall

Navigating pages

The apartment’s layout and appearance are altered by an arched opening. Professional skills are not required to create the right kind of structure. The most important thing is to buy the required supplies and adhere to the detailed instructions. The right method for resolving the issue will result in sophistication, elegance, and refinement.

Relevance in the interior

In the event that you require additional space in your apartment without the use of a door, installing an arched aperture becomes important. By implementing the solution, a cozier ambiance is produced and the area appears larger. The living room, kitchen, or an insulated balcony are the common places to use this option for decorating openings.

Types

There are numerous ways to make the opening better. Selecting a form that is appropriate in terms of both size and outline for the interior that has been created is crucial. There are two categories of structural models: active and passive. The first one lets you see into multiple rooms at the front door. The second have a straightforward design and are utilized in compact apartments. Arches are categorized according to type as follows:

  1. Classic – a semicircle with a radius of ½ the width. Recommended for use in rooms with high ceilings.
  1. Portal. In shape, it is a familiar rectangle, but does not fit into all rooms. Will fit into a strict interior with straight lines.
  2. Modern. The arch is not straight, but not round either, a cross between classic and portal. The radius of the arch is any, it is important that it is not more than half the width of the opening.
  3. Romance. Rectangular arch with rounded edges, suitable for equipping a wide opening of a room with low ceilings.
  4. East. A domed product that does not detract from the dignity of the room.
  5. Ellipse. A universal model that fits into any interior, regardless of the height of the room. The bend is selected according to the original parameters of the room.
  6. Trapezoid. A non-standard solution that gives the room exoticism, genuine interest and delight.
  7. Semi-ellipse. A suitable option for both wide and narrow openings. Oval flattened at the top
  8. Semi-arch. An asymmetrical technique that combines two forms. For example, a portal and an ellipse, etc., asymmetry allows you to hide shortcomings in installation
  9. Author"s. It has any bend and shape, gives the room uniqueness, originality.

Broken-line, non-standard arches incorporate multiple styles, windows, lighting, and other extra features.

Is it possible to do it in a panel house with your own hands?

There are multiple load-bearing walls in the apartment. You must speak with experts to determine whether redeveloping the wall is possible before moving forward. Occasionally, panel houses need to have the opening resized, but this is a challenging task because it involves cutting the reinforced concrete structure.

An arch is the ideal solution if you want to increase the area but are unable to take down the wall entirely. Drywall is regarded as an appropriate material. It is dependable, useful, and affordable.

A load-bearing wall needs to have a portal made in it before you can create an arch, but for stability, you should leave a small amount of the wall untouched. Using a hammer drill, the hole is created, making the passageway along the width useful and convenient. It’s crucial to strengthen the opening as well.

In which wall it is not allowed to do

If the load-bearing wall has a floor slab on it, the load distribution will be uneven and cracks will show when making an arch. After performing engineering calculations for the load, dimensions, and reinforcement, an opening may be made. after the development of a redevelopment project and the creation of a technical report. Only adherence to these conditions will prevent the wall from collapsing.

Step-by-step guide

You will need a tool and thorough instructions if you want to construct an arch out of plasterboard on your own. Since rounded arches go well with most interior design styles that feature symmetry and regular shapes, they are more frequently used.

Materials for work

Drywall is enjoyable to work with because it is simple to cut and screw-fastened. In order to install an arched opening, the following equipment is required:

  • construction pencil;
  • electric jigsaw;
  • knife for cutting sheets;
  • needle roller;
  • self-tapping screws;
  • electric drill;
  • grinder;
  • screwdriver.

Metal guides and the plasterboard sheets themselves are also required.

Aluminum frame

A metal frame can be manufactured in an easy way. Making sure the arch is even requires cutting the profile to the appropriate size. The profile must then be fastened to the wall.

The upper portion of the opening is fixed with two identically sized strips that match the opening’s width. Similar profiles are installed on the sides, two on each side. You can select the structure’s radius using this procedure.

If the profile is attached to a concrete wall, pre-drilled holes are made for fasteners. For this, a drill or hammer drill is utilized. Screws are used to secure the strips to the wooden surface; keeping the frame firmly in place is crucial. There are 15 to 20 centimeters separating each fastener.

Following the precise measurements is required in order to create an arc from a profile. The arc is pre-cut from a drywall sheet; measure it. To be safe, cut the profile one centimeter longer.

Procedures to follow in order to create an arc:

  1. Using metal scissors, make cuts along the side of the profile every 8–10 cm, which will help bend the strip.
  2. Fix the ends of the workpiece with screws on the bottom of the gypsocarone arc.
  3. After secure fastening, fix the curved profile and the plasterboard wall using self-tapping screws at the point of contact.
  4. You should make sure that the plasterboard wall is firmly fixed to the metal, since the reliability of the frame and the appearance of the arch depend on this.

Installation of light points

The arch is solidified by spotlights. Although they are all unique, how they are installed is the same:

  • cut the cardboard with a knife along the previously marked lines;
  • cut a hole with a special “crown” attachment;
  • remove the inner part of the plaster;
  • pull the wiring out through the hole;
  • connect the two wires located on the socket to the power supply core using a terminal block and secure;
  • connect the lamp to the wires;
  • screw in the light bulb;
  • turn on the switch to check the operation.

Marking

This stage’s guiding concept is as follows:

  • determine the location of the lamp, according to the selected model;
  • apply markings on the surface with a compass;
  • determine the diameter based on the internal size of the decorative overlay so that the inner part fits into the hole.

Gypsum board frame

The detailed directions below must be followed in order to create a lovely arch:

  1. Determine the height of the future arch.
  2. Take a sheet of plasterboard, draw the shape of the structure and cut along the contour using a jigsaw.
  3. Trace the outline with a pencil on another sheet to get two identical halves.
  4. Bend the workpiece to take the desired shape.
  5. Cut out a strip, wet the upper part with water.
  6. Put it on a stool, attach two bricks on the sides.
  7. Allow time for the workpiece to take the desired shape and dry.
  8. Attach the finished strip to the frame using self-tapping screws.

Finishing the arch

Painting with water-based paint and puttying are the typical finishing options. It dries fast and doesn’t smell strongly. Prime the surface after puttying by gently rubbing it with fine-grained sandpaper. Select a paint color and apply it in two coats.

An arched opening can turn a boring wall into a visually arresting architectural element in your home or apartment. This tutorial will lead you through the process of designing and cutting an arched opening, providing helpful hints and necessary equipment to ensure a quicker and more effective outcome. Whether you’re a do-it-yourself enthusiast or simply want to give your place a special touch, this article will offer simple guidance to make the process easy and result in results that look professional.

What materials can be used besides drywall

The absence of adhesives during the manufacturing process guarantees the environmentally friendly nature of drywall. It varies from others that replace it in the following ways:

  • OSB, chipboard and gypsum fiber board;
  • plywood;
  • PVC panel;
  • SML and PGP slabs.

Drywall is an all-purpose material that can be used to quickly create arches, partitions, and divide spaces. Redevelopment is a common use for it. It is inexpensive, easy to use, and environmentally friendly. It also boasts great performance qualities.

Step Description
1. Plan the Arch Decide where you want the arch and measure the width and height. Use a pencil to sketch the arch on the wall.
2. Gather Tools You"ll need a saw, level, measuring tape, pencil, and possibly a template or arch kit.
3. Cut the Opening Use a saw to cut along the pencil lines. Be careful and make sure the cuts are straight and clean.
4. Install the Frame Fit a wooden or metal frame into the opening. Secure it with nails or screws to ensure stability.
5. Finish the Edges Use joint compound or plaster to smooth out the edges and create a seamless finish.
6. Paint or Wallpaper Once the compound is dry and sanded smooth, paint or apply wallpaper to match the rest of the wall.

Making an arched opening in your wall can be a great way to add charm and character while also improving the appearance of your room. Even individuals with minimal skills can complete this do-it-yourself project with the correct supplies and a little knowledge. As you proceed with your project, keep in mind to measure and plan precisely so that your arch will match your design exactly.

Throughout this process, safety is vital. Wear safety gear at all times, and handle tools and materials according to the instructions. To avoid making costly mistakes, it’s wise to seek professional advice if you’re unsure about any step. The end product will look polished and professional if you take your time and pay attention to every detail.

Your home will gain a gorgeous new feature as a result of the work you put into creating an arched opening. Take pride in the changes you’ve made and enjoy the process. This guide should assist you in creating a stunning, personalized look, regardless of whether you’re going for a classic or modern style.

Video on the topic

How to decorate an arch✅

How to make an arched opening

plastering an arch #machine plastering #plastering station #arch #arch

█ HOW TO MAKE AN ARCHED OPENING IN A WALL part 1, repair

Plastering a doorway!

THIS IS WHAT HAPPENS WHEN YOU GLUE THE MESH NOT ACCORDING TO TECHNOLOGY!

What interior style do you like the most?
Share to friends
Veronica Gerasimova

Interior designer, author of books on the design of residential premises. I will help you make your home not only functional, but also beautiful.

Rate author
Vash-Variant.com
Add a comment