Home décor that is both fashionable and useful frequently requires a little bit of do-it-yourself magic. Plasterboard partitions are a popular project because they can be used for many different things, such as adding a door or niche, making a compartment or opening in a wall, or any combination of these uses. This type of project can completely change a space while adding both functional and beautiful elements.
We’ll walk you through the steps of creating a plasterboard partition with a door or niches in this guide. We’ll also go over how to construct a wall with an opening or a compartment inside of a wall. Even if DIY is new to you, you’ll be able to tackle this project with confidence if you have clear instructions and advice.
Plasterboard partitions are an adaptable solution for dividing spaces, adding extra storage, or just changing things up. Let’s explore how you can make these improvements on your own, improving the functionality of your house and saving time and money.
- Partition made of plasterboard with a door
- Advantages of plasterboard ceilings in an apartment and house
- When you need to make a partition with a door
- How to make a plasterboard partition with a door with your own hands
- Tools
- Materials
- Measurements: calculation table
- Planning and marking
- Installation of the lathing
- Sound and noise insulation
- Finishing
- How to make a gypsum wall for compartment doors
- Installation of coupe doors in the wall
- How to care
- Video on the topic
- Doorway ➥ Installation and Sheathing with plasterboard ✦ PLATO & Siniat
- Partition made of plasterboard with a compartment door. Plasterboard partition with sliding door
- How to make a doorway in a plasterboard partition yourself and correctly?
- Installing a door in a wall / Pencil case door / Cassette door
- How to make a partition from plasterboard with a door
Partition made of plasterboard with a door
Navigating pages
Plasterboard partitions with doors are the most effective way to split up a large space into rooms that serve different purposes.
Using sound-absorbing material, the partition is installed in accordance with the intended use of the space. Bending the sheet for decoration or using double gypsum board sheathing are required in certain situations.
The fact that the door is being installed is significant. The partition’s installation procedure varies based on its kind.
Advantages of plasterboard ceilings in an apartment and house
A common building material for repairs is gypsum board. A partition made of sheets of gypsum plasterboard has several advantages:
- Features of materials – resistance to moisture, temperature changes, light weight. The created partitions do not carry weight for the supporting structure of the building. Galvanized profiles – do not rust. GK-sheet does not emit harmful substances. The partition is easy to install, and the structure is durable. It is possible to install lighting, make heat and sound insulation. The surface of the created wall is smooth, ready for finishing.
- Simple installation of a wall with doors. The installation of the structure is within the power of a beginner. For a properly performed job, you should follow the masters" plan and take into account the nuances that arise during the work.
- Electrical wiring and pipelines are laid inside the created structure. It is possible to install hidden doors.
Every material used in the building of the structure is reasonably priced and accessible to all.
When you need to make a partition with a door
Apart from your personal wish to rearrange the space, there are instances in which a division is required:
- Moving into a new apartment. Contractors rent out new apartments without planning. This allows the owner to decide where the office, living room will be, what size.
- Major repairs with redevelopment. Let’s say you need a separate room for a child, a room for work. In this case, it is advisable to install a partition with a door and make sound insulation.
- Installing a partition to create a dressing room or pantry.
- Office reshuffles. Hiring a new employee requires a separate room. The way out of this situation would be to erect a partition with a door and niches.
- Warehouses. There must be a warehouse accountant in the warehouse. For quiet work, allocate a place and create a partition. Using drywall is the best option.
The owner also wants to make major changes to the house. Create a fresh flower area or office. Decorate your apartment in an intriguing way or use a medieval theme.
A useful and affordable way to improve your living area is to build a plasterboard partition with a door, niches, or an opening. This tutorial will lead you through the simple process of designing and constructing these elements on your own, providing advice on how to measure, cut, and put plasterboard together to produce a polished finish. Whether you’re installing a new wall feature or a compartment, you’ll discover how to finish the project quickly and skillfully.
How to make a plasterboard partition with a door with your own hands
The work must be completed in accordance with the planned plan in order to construct a plasterboard partition with a door. Every detail matters for the structure’s long lifespan and aesthetic appeal.
It is necessary to complete preparatory work before installing metal profiles. Among them are the following:
- determining the exact location of the partition;
- cleaning – freeing the surface of the floor, walls, ceiling from the finishing coating to identify cracks that may affect the gypsum board partition;
- taking measurements;
- purchase of material;
- marking;
- installation work;
- finishing activities.
Every task is completed effectively and with care. This determines the overall structure’s strength.
Tools
The following tools must be ready in order to install a plasterboard structure: electric and manual
- perforator, screwdriver, drill;
- cutter, metal scissors;
- construction knife, hacksaw for gypsum board;
- spatulas with different blades, roller, brush.
To mark, you must:
- laser level or regular, meter;
- pencil, chalk line, plumb lines.
Materials
Purchase of materials required:
- Galvanized profile – guide (PN, UW), rack (PS, CW).
- Drywall. Consider the humidity of the room, fire resistance. Choose a regular sheet – gray, moisture-resistant – green, fire-resistant – pink. Sheet thickness 12.5 cm.
- Soundproofing material. Use mineral wool. It has the properties of insulation, noise absorption.
- Fasteners: dowel-nails 6×40, 6×60, metal screws LB9, LB 11, screws for plasterboard 25, 30.
- Damper tape.
- PU corner profile – to protect external corners.
- Reinforcing tape for gypsum board joints. Paper Knauf or serpyanka.
- Putty for joints and finishing mixture.
- Primer.
- Sandpaper for grouting.
Door blocks, fittings, fittings, and fasteners (headless nails) are required for installing doors.
Measurements: calculation table
Appropriate calculations are performed in order to buy the material. You’ll be able to save money and avoid purchasing extraneous items by doing this.
Assume that a plasterboard partition has the following measurements: 5 m in length and 3 m in width. Its door is 2.1 m high and 80 cm wide. Frame composed of single-layer plasterboard sheathing and 7.5 cm-wide profiles.
- Guide profile. Calculation of the partition perimeter: (5 + 3) * 2 = 16 m. The width of the opening is subtracted from this value (0.8) = 16-0.8 = 15.2 m. The height of the partition is 3 m, that is, you need 2 profiles of 3 meters each, the rest of the profile will go to the ceiling, floor and reinforcement of the metal structure in the place where the door will be.
- PS rack profile. Based on the width of the plasterboard sheet, PS are mounted at a distance of 60 cm from each other. The width of the partition is 5 m. So, 5/0.6 = 8.3, you need 8 pieces of PS, 3 meters long.
- Door posts are made reinforced, using a double profile. The posts can be reinforced with the remains of NP. For them, you will need 2 more pieces of PS, 3 meters each. PS 1 meter goes to the top of the doorway.
- For the frame lintels, you need sections of profiles. For accuracy, you need to buy another strip of PS, and the remains will also go.
- Drywall. Sheet length 3 m, width 1.2 m, thickness 12.5 mm. For 1 side, you need 5 sheets. Accordingly, for 2 sides – 10 sheets.
- The number of fasteners is calculated based on the frequency of fastening. The distance of fastening is no more than 30 cm.
Table of approximate calculations:
Planning and marking
You need a plan-diagram before you can begin to erect a partition. It provides information about the partition’s size, design (niches, backlighting), and door type (swing, sliding).
On a standard sheet of paper, or graph paper, the plan-diagram is displayed. Using a laser level, pencil, and meter, marks are applied to the surface based on the drawing and dimensions.
Hangers hung from the ceiling serve as the first element of the marking. They display the points on the floor along which a line is drawn. That being said, on the ceiling.
Fundamentals of accurate marking:
- You should not focus on the adjacent wall. It may be “tilted”. To make accurate markings, use plumb lines, a laser level.
- Before drawing a guide line, you need to calculate the thickness of the gypsum board, profile, putty – these are additional millimeters.
- You should also take into account the thickness of the doorway.
The floor line indicates the door’s location and the opening’s width. The hinged door in this instance is not positioned in close proximity to the nearby wall. An indentation must be made in order to allow the door leaf to open freely.
There is also a mark on the ceiling where the door frame should be. It is done to mark the walls. Lines have to be perfectly vertical.
Installation of the lathing
Following the marking process, the frame installation process starts. To accomplish this, adhere to these detailed instructions:
- A damper tape is glued to the back of the NP. It is sound-absorbing, dampens vibrations.
- Hole dowels are made on the floor and ceiling. 15 cm are stepped back from the wall, then dowels are inserted every 30 cm. Apply the NP and fix it with nails.
- NP is not installed on the floor where the door is installed.
- Profiles are fixed on adjacent walls in the same way.
- NP is installed vertically at the door installation site along the designated boundaries of the door frame. Reinforcement is made with a wooden board or another profile. It is fastened with self-tapping screws.
- After this, the height of the doors is marked on the profiles. A horizontal crossbar of a length equal to the width of the doorway (from one post to another) is set according to these marks. It needs to be reinforced.
- Now measure the distance from the vertical door post to the wall. This distance is divided into segments for the PS. Step between them 60 cm.
- The rack profile is inserted into the NP from above and below. Fix with screws. A mandatory condition is constant level control.
- The metal frame is ready. For the strength of the lathing, stiffeners are installed. They are made from horizontal lintels made of PS. Mount horizontally, stepwise (not in one line).
The thickness of the box will depend on the depth of any niches in the partition.
Every step of the profile installation process is examined for evenness. This assures you of its durability and strength.
Installing the frame base is the first step in the electrical wiring process. There needs to be a diagram for this. Location of outlets and lighting fixtures. The corrugated pipe containing all wires must not come into contact with the metal profile. The wires are exposed by 15 cm where a lamp or socket (switch) is intended to be.
Sound and noise insulation
Gypsum boards need to be used for the partition’s sheathing on one side once the communications are installed in the metal frame.
First, complete gypsum board installation is done. The sheet must be attached such that the horizontal borders do not line up. Next, seal the remaining gaps in the frame. The sheet is fastened with tiny self-tapping screws, or seeds. 3 cm from the border. There is a 15-20 cm pitch between fasteners. To prevent damaging the cardboard, the screws are slightly recessed into the gypsum board.
The edges of the sheets ought to be chamfered. There is a 5 mm space where the sheet is not flush with the floor and the wall next to it. It will then be covered with putty and a sickle.
After the gypsum board is put in place on one side, insulation is added inside the partition, and sheets are used to cover the other side. The locations of the lamps and outlets are labeled, and the cables are visible from the outside.
Finishing
Following plasterboard facing, the following tasks are completed:
- Check all gypsum board joints. There must be a chamfer (recess). If it is not there, cut out a recess at an angle of 45 degrees with a construction knife.
- The seams are treated with a primer. To do this, use a brush.
- Glue serpyanka to the joints using joint filler. The same filler is used to cover all fasteners.
- After the filler has dried, sand it down with sandpaper, removing excess mortar.
- Coat the entire surface with a primer using a roller.
- Coat the gypsum surface with a finishing mortar. After drying, rub it down and coat it with primer again.
The partition is prepared for tiling, painting, and wallpapering.
How to make a gypsum wall for compartment doors
Make a reinforced metal frame (double profiles) and sheath the partition with two layers of gypsum board to create a sliding door partition.
- There should be no insulation inside the partition. It can interfere with the free movement of the doors.
- All wires are pulled inside the frame base. They should not hang – this is an obstacle for the motor mechanism of the door leaf. With all this you need to take into account the depth of the socket box for the gypsum board. It can become an obstacle to door opening.
- The frame base is mounted using the level.
- When installing the floor mechanism for the door, the coating is taken into account. It should not interfere with the movement of the canvas.
When installing the partition, all the subtleties are considered; otherwise, the errors can only be disassembled and not fixed.
Installation of coupe doors in the wall
When building the frame, the compartment door mechanism is installed in the partition. The doors’ upper and lower guides are precisely and firmly fixed between the profiles.
After sheathing the partition and applying the finish coating, the door leaf is inserted into the mechanism. We verify that the installed doors open without obstruction. Subsequently, they installed flooring and accessories.
How to care
To maintain the division just. If painted, use a moist microfiber cloth to clean the surface. A dry rag if the wallpaper is glued. You don’t need to wet the partition too much if it is tiled. The gypsum board will become wet from the floor’s penetration, deforming the surface.
Plasterboard partition installation is a quick process. Accurate computations, the acquisition of the necessary supplies, and the assembly of a toolkit are all necessary for proper work. You can rent a power tool if one isn’t available.
You must use great caution when installing sliding doors in a partition to ensure that every component is fixed uniformly. It is imperative that you perform accurate calculations regarding the width and location of the doorway. You have to consider that the door may open. compartments or doors with hinges.
Step | Description |
1. Plan Your Design | Decide where you want the partition, door, or niche. Measure the space and sketch your plan. |
2. Gather Materials | Get plasterboard sheets, metal or wooden studs, screws, drywall tape, joint compound, and a door if needed. |
3. Prepare the Area | Clear the space and mark where the partition or opening will go. Make sure the floor and walls are clean and level. |
4. Install the Frame | Set up the frame using studs and fix them to the floor and ceiling. Ensure the frame is square and level. |
5. Attach Plasterboard | Secure plasterboard sheets to the frame with screws. Leave gaps for doors or niches as per your design. |
6. Cut Openings | Use a saw to cut out spaces for doors or niches. Ensure the cuts are clean and accurate. |
7. Tape and Mud | Cover the joints and screw holes with drywall tape and joint compound. Smooth it out and let it dry. |
8. Sand and Paint | Sand the dried compound to a smooth finish. Apply primer and paint to complete the look. |
9. Install Door or Shelves | Fit the door into its frame or install shelves in the niches. Make any necessary adjustments. |
10. Clean Up | Remove any debris and clean the area. Check your work to ensure everything is secure and finished properly. |
A satisfying do-it-yourself project is plasterboard partitions with doors, niches, or openings. You don’t need advanced skills to achieve professional-looking results if you follow a clear plan and comprehend the fundamental steps. With the correct tools and methods, every step—from measuring and cutting the plasterboard to putting in the framework and adding the finishing touches—is doable.
Before you begin, make sure to measure and mark your space precisely. This will help you avoid making costly mistakes. A clean and useful finish is dependent on precise alignment when installing the door or niches. To achieve a smooth, polished appearance for your partition, take your time painting and finishing.
Ultimately, adding a custom plasterboard partition to your space can improve its appearance and functionality with patience and attention to detail. Adding storage options or designing a new room arrangement are just two examples of how you can tailor your home to suit your needs and preferences with this project.