How to glue wallpaper on OSB boards in an apartment on the walls: recommendations on how to glue quickly, tips for pasting

Although applying wallpaper to OSB (Oriented Strand Board) walls in an apartment can seem difficult, it’s actually not as difficult as you might think if you take the proper approach. Although OSB is a common wall material, you must first prepare the surface due to its distinct texture and rough surface before you can begin pasting wallpaper.

We’ll go over all the necessary procedures in this post to prepare your OSB walls for wallpaper application and guarantee a smooth, durable finish. We’ll also provide you with some helpful hints and techniques to help you work fast and effectively so you can start using your freshly decorated area right away.

These suggestions will make wallpapering a breeze for you, regardless of how experienced you are with do-it-yourself projects. Let’s get going and turn those OSB walls into a chic accent piece for your house!

How to glue wallpaper on an OSB board without putty

Navigating pages

A popular low-cost option for interior wall decoration is OSB board. Prior to providing a response to the query about how to adhere wallpaper to an OSB board without putty, you should ascertain whether the task is feasible and how long the finish will last.

OSB board: characteristics

A board made of glue mixed with wood chips and contaminants for durability and strength. The plate is uniformly made and protected from ongoing moisture exposure by an impure glue layer (wood swells when wet and takes a long time to dry). The board emerges from all of the processing sturdy, smooth, and ready for installation.

The strength indicator, for example, is greater than that of plasterboard, plywood, and chipboard. Working with the material doesn’t require a lot of time or effort thanks to its ease of installation and processing. Plaster, putty, varnish, tiling, and some types of wallpaper are used to cover the material.

The four types of OSB available in the construction market differ in their indicators.

In addition to marking, boards vary in terms of their environmental friendliness. When making a purchase, keep this in mind. OSB "ECO" is regarded as secure.

E0 and E1 marking boards are used in rooms for finishing; however, putty and plastering are required.

Is it possible to glue wallpaper without putty

The masters’ list of unfavorable outcomes must be reviewed in order to determine whether it is feasible to adhere wallpaper to OSB without finishing.

  1. After pasting the surface with wallpaper, all irregularities, joints, fasteners appear.
  2. After a while, stains from the board appear on the walls – the release of resins and OSB glue.
  3. The board treatment does not hold the primer and glue. They flow from the surface, thereby worsening adhesion.
  4. If the OSB is poorly treated, the penetration of the glue contributes to the swelling of the chips.

There are some kinds, though, that are glued straight to the boards in spite of all the undesirable effects that follow the material’s glue:

  • liquid wallpaper – when applied to the board, they hide all the irregularities and defects. Glued to the E0 class board;
  • textured wallpapers with a relief pattern – also glued to E0 class boards. You only need to cover the OSB with a primer.

Without putty, all other finishing materials cannot be glued.

Gluing

You have to do a lot of prep work before you can glue the OSB sheet. The quality of the materials and labor determines how the wallpaper will look once it has been finished and allowed to dry.

You can glue thin, thick, striped, light, and embossed trellises after preparing the base.

Surface preparation

The following procedures make up surface preparation:

  1. Leveling the base. Here you need to level the surface and remove the top protective layer from the slab, which makes it difficult to apply the primer. The surface can be sanded either with a machine or sandpaper.
  2. First application of primer. The primer is applied 2 times. It will prevent wood chips from swelling from glue and moisture, and will also improve the adhesion of the material applied to the surface. Experts recommend using a primer that contains acrylic or latex.
  3. Treatment of seams and fasteners. After installation, a gap of 2-3 mm remains between the plates. It definitely needs to be sealed. Silicone sealant is used for this. You can also use polyurethane foam or plastic putty using serpyanka. All fasteners are coated with paint so that they do not rust later.
  4. Fixing fiberglass reinforcement sheet. The reinforcing mesh will improve the adhesion of the putty to the surface. It is fastened with a stapler. Start work from the slope and lead the mesh to the adjacent wall. You can also use glue to fix the glass sheet.
  5. Puttying. Depending on how curved the walls are, plaster or putty is used. For work, choose materials for wood that have elasticity (oil-adhesive). After applying the solution and drying, it is necessary to do grouting with sandpaper.
  6. Repeated priming.

Accuracy and responsibility are needed at every level.

Primer

Surface priming must be done repeatedly. It will guarantee improved wallpaper adherence to the slabs and guard against putty soaking up glue. There are two applications of primer. Only after the first layer has completely dried—roughly 12 hours—is the second layer applied.

Painters advise against priming puttied and unsanded walls. Make sure all of the dust is gone after sanding.

Wallpaper selection

You must become familiar with wallpaper classification in order to select the appropriate wallpaper.

  1. Regular – paper. Clean only with a dry cloth. Cannot tolerate wetness or dampness.
  2. Waterproof – washable trellises. Can be washed with a wet sponge and use gentle detergents.
  3. Fading in the sun – to determine whether the paint of the trellis fades in the sun or not, you need to look at the label (image of the sun).
  4. Customizing the drawing. There is a material that does not require joining the borders of the canvases (monochromatic), but there are large patterns that require joining for a single pattern. The connection is described on the label.

Basic information about fading, moisture resistance, type of glue, and joining the canvases’ borders is included in the instructions that come with each roll.

Wallpapering

Before pasting wallpaper, craftsmen advise gluing paper made for this purpose to the surface. This is not necessary, though, if the surface preparation was completed in compliance with all specifications.

  • in a clean container, you need to prepare the glue, according to the instructions on the package;
  • then, you need to measure the length of the glued strips and cut several strips. If the material has a pattern, you should immediately select a pattern at the joints;
  • after this, the finished glue is applied to the wallpaper strip. The material is folded in half for good impregnation. At this time, glue is applied to the surface;
  • the finished strip is applied from above to the required place;
  • carefully, evenly (for this, a vertical line is drawn on the wall – a guide) glue the material to the wall, driving out air from the middle to the edges. For this, use a soft roller, a rubber spatula, a soft cloth.

Air bubbles on paper wallpaper will not disappear right away. After some time has passed, the bubble’s location is carefully punctured with a needle in order to release the air.

Although applying wallpaper to OSB boards in an apartment can be challenging, it is completely possible with the correct method. To guarantee that the wallpaper sticks well and lasts a long time, the surface must be properly primed and sealed. We’ll go over quick and simple methods in this post to help you paste wallpaper on OSB as smoothly and hassle-free as possible, from surface preparation to finishing touches.

How long will an OSB coating last without putty?

On OSB, wallpaper without putty can endure for a while.

  • in a dry place – 2-3 years, then it will simply peel off the surface in strips;
  • in a damp room – 1-2 years maximum. After which the strips will peel off, and the board will deform.

Five years or more with an OSB surface treated with primer and putty. Depending on variations in temperature and humidity.

Putty boards that are plastered have a long lifespan because their surface is shielded from the elements.

Tips

To help you avoid mistakes, read the masters’ advice before you begin pasting OSB.

  1. You must adhere to the rule – the joints of the OSB do not coincide with the joints of the wallpaper.
  2. Be sure to re-prime the putty surface. If there is no primer, you can dilute the glue to a liquid state. It is able to close small pores in the putty and protect the surface from absorbing the main layer of glue.
  3. After applying glue to paper wallpaper, you need to glue it as quickly as possible, because it gets wet and begins to tear and swell.
  4. In the corner, the strip of wallpaper should go onto the adjacent wall. The second strip covers the first.
  5. After wallpapering, the room should be draft-free, closed for 24 hours. Temperature fluctuations are also unacceptable.

Wallpapering will not be difficult and will last approximately five years if the listed rules are followed.

OSB boards must be puttied before wallpaper is applied.

This will ensure a beautiful appearance while shielding the material from moisture and deformation.

Without putty, only liquid wallpaper is applied, preventing the released resins from rising to the surface.

Step Recommendation
1. Prepare the OSB surface Ensure the OSB boards are clean, smooth, and free of dust. Sand down any rough areas and fill gaps with putty.
2. Apply a primer Use a suitable primer to seal the OSB boards. This helps the wallpaper adhesive bond better and prevents moisture from affecting the wood.
3. Choose the right adhesive Select a high-quality wallpaper adhesive suitable for the type of wallpaper you"re using. For heavier wallpapers, a stronger adhesive may be necessary.
4. Measure and cut the wallpaper Measure your walls and cut the wallpaper into strips, allowing a bit extra at the top and bottom for trimming.
5. Apply adhesive to the wallpaper Spread the adhesive evenly on the back of the wallpaper or directly on the wall, depending on the type of wallpaper. Let it soak for a few minutes if required.
6. Hang the wallpaper Start at the top of the wall and align the first strip with a plumb line. Smooth it down with a brush or roller, working from the center outward to remove bubbles.
7. Trim the excess Use a sharp knife to trim any excess wallpaper at the top and bottom. Be careful not to damage the wallpaper or the surface.
8. Finishing touches Wipe away any adhesive residue with a damp cloth. Allow the wallpaper to dry completely before adding any additional decorations.

Although it can seem difficult at first, adhering wallpaper to OSB boards in an apartment is completely possible if you take the proper approach. The secret is to prepare the surface properly, which includes sealing the boards to guarantee a stable, smooth surface for your wallpaper. To avoid any future problems like bubbling or peeling, this step is essential.

The actual wallpapering process is simple once the surface is prepared. Select an adhesive that is compatible with the sealed OSB surface and the wallpaper. To prevent wrinkles and bubbles, carefully apply the wallpaper, smoothing it out as you go.

By keeping these pointers in mind, you can wallpaper OSB boards with confidence and change your area fast and efficiently. Just keep in mind that getting a professional-looking finish will require patience and close attention to detail.

Video on the topic

We glue wallpaper on the OSB board

Gluing wallpaper on OSB⁉️

preparing the OSB board for wallpapering

What interior style do you like the most?
Share to friends
Veronica Gerasimova

Interior designer, author of books on the design of residential premises. I will help you make your home not only functional, but also beautiful.

Rate author
Vash-Variant.com
Add a comment