How to glue wallpaper on fiberboard with your own hands

Refreshing a room’s appearance with wallpaper is a common practice, but it requires more care and attention when the walls are made of fiberboard. Hardboard, sometimes known as fiberboard, is a common building material, but it has peculiarities that should be taken into account when decorating.

Should you decide to take on this project on your own, you’ll need to be aware of the correct procedures and methods to guarantee that the wallpaper sticks and adheres correctly. Each step is essential to achieving a smooth and durable finish, from surface preparation to adhesive selection.

This guide will help you apply wallpaper to fiberboard by guiding you through the steps, outlining the supplies and equipment you’ll need, and providing helpful advice to ensure the best results. Regardless of your experience level, this guide will help you tackle the task more easily and enjoyably.

Performing wallpaper pasting on fiberboard

Applying wallpaper paste to fiberboard is a very simple task. You are capable of handling everything on your own. Here is a guide on this matter. All you have to do is take your time and abide by the rules here.

You can get in touch with a reliable master if you’re worried that you won’t be able to complete the assignment effectively. You will undoubtedly save time and effort in this manner.

We draw attention to possible problems

There is no need to conceal the issues that exist:

• Hardboard absorbs moisture from the air very well. The glue that we apply to the wallpaper also absorbs well. However, with such properties, one can hope for good quality adhesion of surfaces.

Be aware that hardboard will deteriorate and warp as soon as it absorbs the most moisture.

When there is this much moisture present, the wallpaper will start to wave on its surface.

• The seams that are between the fiberboard will become visible under the wallpaper of a small thickness. Swelling sheets will be even more striking: the dimensions of such surfaces, due to their ability to absorb all the moisture from the air, will change in the most unexpected way. However, when gluing thick wallpaper, such waves can be slightly hidden.
• Now let"s think about the method of fastening the hardboard. We use either nails or self-tapping screws, right?? Often even non-galvanized. After what time does any nail become a potential source of corrosion and rust.

If you have the right tools and do a little preparation, anyone can easily apply wallpaper on fiberboard. The secret is to ensure that the surface is clean, dry, and smooth before applying the wallpaper adhesive and hanging the wallpaper with caution. Providing step-by-step instructions and useful advice, this guide will help you accomplish a polished finish without having to hire a contractor.

Developing options for solving problems

How are we going to wallpaper all these flaws?

Painting the walls

By priming our surface—which acts as the separation between the glue and the base—we can prevent the problems caused by hygroscopicity and the appearance of corrosion. It is not necessary to prime too deeply into the surface because the particle itself takes its place here.

A common question is whether wallpaper can be adhered to fiberboard using glue, and if not, why not. Let’s go over each of its component parts. Water makes up a sizable portion of the primer’s total volume. However, we wish to have as little interaction with it as possible.

They will perform at their best if we use alkyd primers or paint materials for our work. After making a few minor adjustments when preparing the glue, they will apply a thin layer of excellent waterproofing material to all of the fiberboard and fasteners. This will allow us to guarantee good contact with a clean surface.

Generally speaking, the design itself has two points:

1. We paint the entire surface of the fiberboard (see. Painting the walls in the apartment: what and how to do it). It is best to take white paint, since it is necessary that it is invisible under the wallpaper. It is better to do such work in two layers. Carefully paint the seams and fasteners.
2. In the glue for our wallpaper (it does not matter which one we bought in the building materials store) we also pour PVA glue. We calculate it in the amount of half a liter per bucket.

It’s true that we have a major disadvantage because the wallpaper makes the seam relief extremely evident. How are we going to handle these challenges?

Putty

As a last resort, we could putty the whole hardboard surface (see. DIY wall putty underneath wallpaper. It is obvious that you shouldn’t even consider making sure that this layer and the fiberboard are tightly in contact. Is there no hope in this situation?

No, that is not accurate. The resources listed below will be helpful to us:

1. We take already used PVA glue.
2. We will also need a mesh with small cells.

How to use the materials listed above to prepare for repairs and apply wallpaper to hardboard at home:

1. We make a primer in the form of PVA glue and place it on our surface under gluing. The price of glue is very small, ranging from fifty rubles per kilo, so our budget will not suffer much from such actions. There is no need to dilute the glue; we will try to bring the degree of change to the hardboard itself to a minimum level.
2. We glue the fiberglass mesh onto our layer with small cells. Feel free to apply the glue directly to the fiberboard. Through small holes and niches the glue gets to the base itself.
3. Next we apply gypsum putty. The best thickness for such work is one millimeter. If you have not previously done repairs, you can apply several thin layers.
4. We carry out grinding to eliminate defects.
5. We put the primer on the base.
6. We glue the wallpaper using standard glue.

It’s interesting to note that wallpaper can be easily and simply removed the next time it needs to be repaired. It will come off in whole layers with no effort at all if you just lightly moisten it.

We use drying oil as a primer

There is one clear disadvantage to the prior preparatory work approach. We only shield the front portion of our surface from liquid, but if the room has a high humidity level, noticeable changes will eventually become apparent.

Soaking both sides of the fiberboard in drying oil is the best way to get rid of this effect.

There are two methods for completing such repairs:

1. We apply hot drying oil directly to the material.
2. First, we apply cold drying oil, which is heated with a special hair dryer or other similar units.

Following such work, the material no longer fears direct contact with water or excessive moisture. Remember that drying oil and putty do not mix well, and the glue will not lie smoothly on it. How should we respond in a situation like this?

We use contact concrete, which contains quartz sand, to aid us. In contrast to sand, which tends to produce unevenness and roughness, the polymer base offers good contact with even the most challenging surfaces. Any plaster will therefore fit like a glove.

Next, we complete the surface using the conventional plan:

1. Apply putty. We do not reinforce the seams.
2. As soon as the putty dries, we put a primer on it in the form of a penetrating layer. Now we wait for it to dry. Only then the wallpaper itself awaits us.

Although applying wallpaper to fiberboard might seem difficult, it can actually be a simple and satisfying process if you take the proper approach. The beauty of your space can be enhanced with a professional-looking finish by using the right adhesive, smoothing and cleaning the surface, and properly preparing it.

From measuring and cutting the wallpaper to carefully applying it to the fiberboard, take your time at every stage. Maintaining a steady hand and paying close attention to details will help guarantee that the wallpaper sticks perfectly and appears perfect.

You can update the appearance of your walls with a little perseverance and work. Whether you’re a novice decorator or a DIY enthusiast, following these instructions will help you get the look you want.

Video on the topic

How to treat plywood walls before gluing wallpaper

How to glue WALLPAPER on the FLOOR (Cheap and Cheerful)

GLUING WALLPAPER ON FIBREBOARD. WASHING CARPETS AT THE SUMMER HOUSE.

How to prepare chipboard for wallpapering