How to glue paper-based vinyl wallpaper: choice of glue, wall preparation and gluing technology

If done correctly, adhering paper-based vinyl wallpaper can be a simple and satisfying project. Because of its many designs and longevity, this kind of wallpaper is well-liked for a wide range of interior decor styles.

Choosing the correct glue is essential to guarantee a seamless and long-lasting outcome. Knowing which adhesive to use with vinyl wallpaper can make all the difference because different adhesives work better with different types of wallpaper.

Equally crucial is appropriate wall preparation. A surface that has been properly prepared will aid in the wallpaper’s adhesion and guard against problems like bubbling or peeling later. You can attain a polished look in your house by being aware of the procedures for wallpaper application and wall preparation.

Getting to know the material

Vinyl wallpaper is commonly understood to consist of two materials with very different performance characteristics.

1. Foamed vinyl has a fairly significant thickness, is vapor-permeable, and can be painted with water-dispersion paints if necessary. The main disadvantage is limited wear resistance: where the walls are often touched, the coating will quickly lose its original appearance.

This style of wall covering is inappropriate for those who own cats. Your pet will occasionally sharpen its claws at any age, and you will almost certainly have to try to convince it that the walls are not a good place for it to do this.

1. Dense vinyl, on the contrary, is extremely resistant to wear, dirt, and can be washed using any household detergents (except, of course, abrasive ones). Vapor permeability is much lower than that of foamed vinyl.

General features

• All wallpapers of this type are heavy, with a density higher than 120 g / m2. This greatly complicates their pasting on the ceiling: the strips can fall under their own weight.
• The material is glued without overlapping, end-to-end. The instructions are related to the significant thickness of the coating and the limited adhesion of most adhesives to its front surface.

It is evident from the picture that the stripes are glued end to end.

• The price of a roll is noticeably higher than that of paper and non-woven fabric, and starts from 400 rubles per roll.

Application areas

Any room can have vinyl wallpaper adhered to a paper backing without any limitations.

Nonetheless, the following characteristics of dense and foamed vinyl should be considered:

• For damp rooms (bathroom, toilet, kitchen), hallways and corridors, it is better to use dense vinyl wallpaper. The reasons are obvious: splashes and inevitable dirt will have to be washed off, and increased wear resistance will come in handy in this case.

The bathroom’s walls are covered in thick vinyl.

• Foamed coating is more suitable for living rooms and bedrooms. Increased vapor permeability will be to our advantage: ventilation ducts are rarely installed in rooms; meanwhile, up to a third of water vapor leaves living rooms directly through the wall material.

Choosing the appropriate adhesive, carefully prepping your walls, and adhering to exact gluing instructions are all necessary to become an expert at applying paper-based vinyl wallpaper. Every step is made easier with this guide, so even novices can accomplish a perfect finish without assistance from a professional.

Glue selection

Which adhesive works best for vinyl wallpaper made of paper?

Generally, vinyl adhesive—made especially for this kind of coating—is used. It is not the same as polyvinyl chloride, despite the name; its unique qualities are slightly higher viscosity and stronger adhesive qualities.

Is it feasible to use vinyl glue to adhere paper wallpaper? Yes, without limitations; however, considering vinyl glue’s significantly higher cost than traditional CMC, the business’s viability from an economic standpoint is highly questionable.

You can use flour paste or even CMC in dry rooms to glue vinyl with your hands. Simply put, they need to be a little thicker than normal because a heavy canvas won’t stay on the wall with glue that is too thin.

A special instance: using PVA glue to apply wallpaper is preferable in the kitchen and bathroom. After drying, it resists moisture better than wallpaper adhesives, but it will be difficult to remove when you do the next renovation.

Preparing the walls

This is a fairly typical procedure: the wall is leveled with putty and primed with a penetrating primer after delicate coatings with poor adhesive qualities are removed all the way to the plaster or concrete. An antiseptic primer is necessary in moist rooms because walls devoid of natural ventilation can serve as a haven for fungi.

How do I get rid of old coatings?

• To remove paper wallpaper, it is enough to moisten it generously. Repeat the treatment with a damp cloth or sprayer twice with an interval of 10-15 minutes; then remove the coating in whole strips. Clean up the remains with a spatula.

The soaked paper peels off the base with ease.

• Washable coating can also be removed after moistening; however, before this, its surface will have to be rolled with a needle roller or simply make frequent cuts on it with a sharp knife.
• Whitewash is again soaked in water and removed with a spatula.
• Enamels based on organic solvents are removed after treatment with a wash or heating with a building hair dryer.
• Vodsulsiones are removed only with grinding. However, PVA glue allows you to glue vinyl directly on them – if only the paint does not exfoliate.

Can vinyl be glued to outdated wallpaper?

Yes, but with some disclaimers:

• If we are talking about a single -layer paper coating without a textured pattern.
• If when moisturizer it does not depart from the wall and does not swell with bubbles. Before the sticker, the base, as we recall, is previously primed with penetrating soil: it will reliably bind the paper with plaster under it.

Sticker

Vinyl wallpapers are adhered to paper using the same method as other wallpapers: glue is smeared onto the wallpaper strip, which is then aligned along the edge of the prior fabric or the plumb line. The strip is then pressed up against the wall and smoothed out.

But at this point, there are a lot of subtleties.

• Wallpaper with a repeating pattern is cut into stripes, the length of which is greater than the height of the room and a multiple of the step pitch. So, for a rapport (pattern step) of 35 centimeters in a room 2.5 meters high, they will have to be cut by 280 (35×8) cm.

After gluing, any excess is cut off at the baseboards or corner.

• The paper base must be allowed to soak in glue before gluing. To do this, after it has been applied, the canvas is folded in half and left for a few minutes. Why fold? Just so that the glue does not dry.
• The seams are smoothed out and pressed to the wall as tightly as possible, without the slightest gap between the canvases. Gaps tend to expand when drying.

A plastic spatula can be used to smooth out dense vinyl.

• The room is not ventilated until the wallpaper is completely dry.

Step	Description
1. Choose the right glue	Select adhesive specifically designed for vinyl wallpaper. Ensure it matches the weight and type of the wallpaper.
2. Prepare the walls	Clean the walls thoroughly, removing any old wallpaper, dust, or grease. Fill in any cracks or holes, and apply a primer if needed.
3. Measure and cut the wallpaper	Measure the height of the walls and cut the wallpaper strips, leaving a little extra at the top and bottom for adjustments.
4. Apply the glue	Spread the adhesive evenly on the back of the wallpaper or directly on the wall, depending on the glue instructions.
5. Hang the wallpaper	Start from the top, aligning the wallpaper with a straight edge. Smooth it down with a brush or roller to remove any bubbles.
6. Trim the edges	Use a sharp knife to trim the excess wallpaper at the top and bottom. Wipe off any excess glue with a damp cloth.
7. Let it dry	Allow the wallpaper to dry naturally. Avoid opening windows or creating drafts that could cause uneven drying.

Paper-based vinyl wallpaper can be glued to a wall to give it texture and style. Selecting the appropriate glue is crucial to guaranteeing a strong and durable wallpaper application. For best results, always use glue made especially for vinyl wallpaper.

For a smooth finish, proper wall preparation is essential. Verify that the walls are level, dry, and clean. This stage guarantees that the wallpaper adheres uniformly to the surface and avoids bubbles.

Pay close attention to the manufacturer’s instructions when it comes to adhering. The process will go more smoothly and the result will look more professional if the glue is applied evenly and you take your time with each strip. You can have a beautifully finished wall that improves the appearance of your room if you take the proper approach.

Video on the topic

Subtleties of gluing wallpaper. Sharing my experience.

Vinyl wallpaper on a paper backing

Gluing vinyl wallpaper

How to glue non-woven and vinyl wallpaper: Arte instructions

How to glue paper-backed wallpaper yourself

How to glue vinyl wallpaper. Preparing walls for gluing vinyl wallpaper

Gluing paper wallpaper

The secret of gluing vinyl wallpaper on non-woven backing.