How to glue meter-long wallpaper for one person

It can seem overwhelming to glue wallpaper that is a meter long, especially if you are doing it by yourself. Even though the extra width of these wallpapers creates a seamless appearance, handling them alone can be difficult. However, it is totally feasible to accomplish a professional finish on your own with the appropriate strategy and helpful advice.

This post will walk you through the procedure step-by-step and in digestible chunks. You’ll find helpful tips on how to prepare your walls, handle the wallpaper, and apply it smoothly, whether you’re an experienced do-it-yourselfer or a novice.

You can completely DIY the transformation of your space with gorgeous, expertly applied wallpaper if you follow these tips. Let’s get started and investigate how to successfully complete this project.

Advantages and disadvantages of meter-long wallpaper

When discussing this material’s advantages, the following come to mind:

  1. A small number of joints. To finish one room, you will need half as many strips, so you will have to worry less about the correctness of the joints. It also creates the impression of a monolithic coating.
  2. Speed ​​of work. Wide fragments cover a large area, it is easy to calculate that it is easier to glue three strips than six.

However, there are a few drawbacks as well:

  • The material requires a perfectly prepared base.
  • High consumption. Wide wallpapers are more expensive, so if a small strip is not enough, you will have to pay for a whole additional roll.

Although it usually takes two or three people to apply wide wallpaper, you can do it alone if you work quickly.

Preparatory work

There are a few steps you must take before adhering wide wallpaper, such as setting up surfaces and tools and figuring out how much material you’ll need.

How to calculate wallpaper footage

Accurate computations will prevent you from having to make additional trips to the store or place home orders for supplies, as well as from spending more money. Finding the room’s perimeter is the first step. Measure the lengths of the nearby surfaces and multiply the result by two to achieve this. Assume two walls, one measuring three meters and the other four. This indicates that the room’s perimeter is 14 meters. Given that the wallpaper is one meter long, 14 strips will be required to completely cover the wall.

The greatest distance between the floor and the ceiling must now be found, then multiplied by 14. For instance, multiplying the height of 2.5 meters by 14 yields 35 meters. This is the bare minimum of the content. To ensure there is a reserve of material, it is preferable to include the dimensions of any windows, doors, balconies, and other features in the calculations rather than taking them out.

Some people believe that since the wallpaper won’t be visible there, it is not necessary to cover the space behind the furniture. This is solely a decision for the home’s owner, but keep in mind that moving things around will reveal bald spots on the wall. The wallpaper can be left in place behind a large cabinet that will remain in place until the next renovation.

It is advised to factor in one or two rolls of reserve when estimating the quantity of material. They might be required both before and after pasting. It will eventually cause damage to the wallpaper if there are kids or pets living there. It is preferable to buy a stock right away to avoid having to search for the same ones to replace a section or re-glue everything from scratch.

Surface preparation

As with any other type of these products, the hardest part of gluing wallpaper that is a meter long is the preparatory step. All the following tasks need to be completed while working on the ceiling if the apartment is undergoing significant repairs or finishing after the facility is put into service. Thus, you must take the following action:

  1. Remove the front panels from all sockets and switches, carefully seal the resulting holes.
  2. Remove all fasteners from the walls: screws, nails, dowels, etc.
  3. If there is a coating on the walls, you need to remove it. As a result, not even a small fragment of finishing material should remain.
  4. Check whether the walls are even. To do this, you should apply a building level to them at different points.
  5. For small curvatures, it is enough to use finishing putty, with a serious collapse, plastering may be required.
  6. Wait for the material to dry and sand the area.
  7. Before gluing wallpaper to the walls, it is necessary to treat the coating with a primer. This material will increase adhesion and allow you to save on glue. The drying time of the compositions is different, but usually it is several hours.

It may seem difficult to glue a meter of wallpaper by yourself, but it is completely possible if you prepare and use the proper technique. Everything you need to know to make the process go smoothly is outlined in this article, from priming your walls to handling the lengthy wallpaper strips. Whether you’re working in a big or small space, these useful suggestions will guarantee a polished finish without requiring additional help.

Necessary tools

To complete the task, you will require:

  • a wide brush, roller or brush for applying glue;
  • a container and a construction mixer for preparing the composition;
  • a ruler, a level, a stationery knife, a marker or a pencil;
  • a rubber spatula and a roller for smoothing the wallpaper;
  • a rag for removing glue residue.

Paping

Detailed instructions for applying wallpaper adhesive on your own:

  1. Prepare the adhesive composition according to the instructions on the package.
  2. Using a level and a pencil, mark the upper border.
  3. Fold a small part of the strip to form a corner.
  4. Lean the material against the wall and press it tightly.
  5. Iron the pasted wallpaper with a rubber spatula, moving from the center to the edges. You can also use a roller to push out the air.
  6. Use a metal spatula and a stationery knife to cut off the excess.
  7. Inspect the strip and make sure that it is completely glued to the base.

In certain situations, you will have to wait because wet wallpaper is difficult to cut.

Jointing

The pasted strip and the neighboring one should be placed end to end. It’s crucial to change the wallpaper’s pattern height if there are any. The strip needs to be smoothed out and held in place so it doesn’t move away from the prior one during the glue process. In this instance, stretching the material to create a joint is not permitted because it will shrink back and leave a gap when it dries.

Note: If necessary, non-woven wallpaper can be moved across the surface for ten minutes after pasting. When applying a different type of wallpaper, it’s crucial to use glue free of additives that speed up drying.

If the joint doesn’t work, you can glue the wallpaper over itself and use a stationery knife to trim off any excess. Apply glue to the remaining unpasted side and use a rubber roller to smooth it out.

Pasting in hard-to-reach places

Let’s talk about how to apply wallpaper by yourself in the corners, over the doorway, and behind the radiator. It is preferable to design them during the paste process. In order to accomplish this, leave a tiny overlap (roughly 2 cm) that will extend to the wall next to it. You must chop the wallpaper into tiny pieces and choose a design before pasting it behind and beneath the radiator. The pieces are then adhered to the wall using the previously mentioned method.

Pasting the area with sockets will present another challenge for you. If the front panel was taken off and the electricity was turned off during the initial stages, all that’s left to do is glue the strip—you don’t even need to look at the hole—and use a knife to cut the wallpaper. It’s okay if the edges are uneven; the front panel will cover them up. It is necessary to glue the canvas with a 5 mm margin when it comes to door frames. The extra length is either trimmed or covered with a trim after smoothing.

Step Description
Prepare the wall Ensure the wall is smooth, clean, and dry before starting.
Measure and cut the wallpaper Measure the wall height and cut the wallpaper strips to the required length.
Apply adhesive Apply wallpaper adhesive evenly on the back of the wallpaper or on the wall, depending on the wallpaper type.
Align and paste Carefully align the top of the wallpaper with the ceiling or previous strip and gently press it onto the wall.
Smooth out air bubbles Use a smoothing tool to remove any air bubbles, working from the center outwards.
Trim excess Trim any excess wallpaper at the top, bottom, or edges using a sharp knife or scissors.
Finish the edges Press the edges firmly to ensure they adhere properly, avoiding any gaps.

Although it may seem impossible to glue a meter-long piece of wallpaper by yourself, it is completely doable with the correct planning and perseverance. You will be more successful if you take the time to thoroughly plan your approach, acquire all required equipment, and prep the walls.

As you work, keep in mind that accuracy is essential. Before continuing, make sure that every strip is smooth and aligned to help prevent errors that might be difficult to correct later. Slow, methodical work will produce a beautifully finished room, so don’t rush the process.

Lastly, if something doesn’t go exactly as planned the first time, don’t give up. The ability to wallpaper grows with practice. You can accomplish professional-looking results on your own by following these instructions and exercising patience.

Video on the topic

How to glue non-woven wallpaper?

Meter-long wallpaper How to glue meter-long wallpaper correctly

How to QUICKLY and EASILY glue wallpaper or photo wallpaper alone!

How to glue wide wallpaper alone! All the secrets!

how to glue non-woven wallpaper (master class)

How to glue wallpaper on the ceiling alone.

How to glue the first strip of wallpaper evenly using a tape measure and pencil

How to glue wallpaper. A large master class on gluing wallpaper.

What interior style do you like the most?
Share to friends
Dmitry Stepanov

Professional decorator with 10 years of experience. I know everything about renovating apartments, houses and offices. I will be happy to share my knowledge and experience with you.

Rate author
Vash-Variant.com
Add a comment