How to choose the right paint and paint a cabinet

An average piece of furniture can become a focal point in your room by selecting the right paint and painting it. Choosing the appropriate paint and applying it properly can make a big difference, whether you’re painting a new cabinet or giving an old one a makeover.

First, think about what kind of paint will work best for your cabinet. Your decision will be influenced by elements like the cabinet’s material, the humidity level in the space, and the desired finish. Every choice, from classy chalk paints to robust latex paints, has special uses and advantages.

After selecting your paint, it’s imperative to properly prep the cabinet to ensure a flawless and polished finish. To ensure that the paint adheres well and lasts longer, the surface must be cleaned, sanded, and primed.

You can get a gorgeous and long-lasting finish that accentuates your cabinet and fits in with the design of your room with the correct paint and preparation.

How to prepare a regular cabinet for painting

Can a wardrobe that has become shabby and shabby during use be painted over if it loses its presentable appearance? The response is unambiguous: it is feasible and occasionally preferable. This makes sense given that older furniture is more durable and of higher quality than more recent models.

The work instructions, which include the following, must be closely followed when getting ready to paint an old cabinet:

• All removable parts are removed from the structure, such as:

1. doors;
2. loops;
3. pens.

• Shelves are pulled out.
• The frame should be absolutely empty if possible.
• Select the place where the work will be carried out. This can be:

1. balcony;
2. or better yet, the street.

Getting the frame ready for painting entails:

• Removing the old coating from all parts of the structure, which can be:

1. wax;
2. colorless varnish (see. How to remove varnish from wood: methods of performing work);
3. all kinds of paints.

This is required to ensure that the new coating is distributed evenly.

• The surface is cleaned down to the wood. In this case, you need to use sandpaper, and all movements should be sweeping, without much diligence.

Advice: Be careful not to remove the varnish layer along with the thin layer of existing veneer when removing the old coating.

• A brush is used to sweep away all the dust from the surface after sanding.

Advice: Avoid using a rag to remove dust from the cabinet as this will cause the dust to get trapped in the wood again.

• All hard-to-reach places are treated with fine-grained sandpaper, and then the surface is brushed again.
• After carrying out the preparatory work, a high-quality cleaning of the premises is carried out, to prevent dust and debris from getting on the surface during painting and to protect the coating from defects on it.

What tools and materials are needed to perform the work

For the task, you will require the following:

• Brush. A roller can also replace it, but in practice it is much more convenient to work with a brush. Painting will be more accurate, and in addition, you can paint all the small elements. In this case, the tools should be chosen of good quality, designed for working with acrylic types of paints.

Advice: Consider the price of the brush or roller before selecting one. A low price could be a sign of subpar quality, which could easily destroy the coating because the pile will climb out of the brush and stay on the painted surface because of the subpar brush.

• Sandpaper of different grain sizes.
• Flat brush.
• Clean rags.
• Hammer.
• Small nails.
• Electric drill.

Supplies you’ll need:

• Cabinet paint. In this case, preference should be given to acrylic types. Their advantages:

1. almost completely odorless;
2. wash off perfectly;
3. mix well with water, which is quite important for obtaining the desired shade of the color of the painted cabinet. Washing off acrylic paint with water allows you to remove any flaws from the painted surface. When drying, the water from the acrylic paint will evaporate, and the coating will gradually become more durable.

Advice: You need to be cautious not to harm the surface that is still weak when the paint is drying.

When restoring the product, one color of paint is not required. Pastel colors can be combined with bright shades in this situation. You should test the paints on the cabinet’s surface to determine the desired colors and their combinations, and then you can just wash the samples off. If the necessary paint color was not available, you can make the desired color using white acrylic material and paint.

• Primer (see. Primer for wood and rules for choosing it). The most suitable acrylic-based composition. In this case, the primer components will interact perfectly with the selected acrylic coating.

If you use the acrylic primer according to the instructions, processing a cabinet with it is fairly easy. Here, it’s crucial to keep in mind the primer’s necessary drying time. Allowing the primer to fully dry is a prerequisite before painting a cabinet or dresser.

Furniture needs to be primed using a roller and a relatively thin layer. The products are then left alone until they are totally dry.

Technology for painting a cabinet

You can begin painting the cabinet after gathering all the necessary supplies and equipment and deciding on a location that will allow for good ventilation and minimal dust.

• When painting a cabinet with paint that has a lighter shade, the paint for the first layer should not be thick or dried. If it has thickened, you will need to dilute the composition with clean water.
• A light shade is applied to the surface of the product in several layers, which depends on the desired effect on the surface. One layer can produce a surface in the Provence style, with a clearly defined wood pattern. To create a denser layer, you will need to apply several more layers.

Advice: Apply single-directional strokes with a brush to every layer.

• After the light layers of paint have dried, a coating of a darker tone is applied. Before this, you must first cover the surfaces that are not to be painted with masking tape. The paint is applied in the same way as the light shade.
• After the cabinet has completely dried, varnish is applied to the surface to obtain a matte or glossy effect in order to protect the created coating. The varnish is applied with a foam sponge using blotting movements. As a result, the product will look like in the photo.

• After the varnish dries, all removable parts of the cabinet are assembled.

Transforming your furniture can be greatly aided by carefully selecting paint and painting a cabinet. Selecting a paint that complements the material of your cabinet and the desired aesthetic is crucial. The paint you choose will determine the overall tone of the piece, whether you want a bold and modern look or a classic finish.

Spend some time cleaning and sanding your cabinet before you begin painting. By doing this, you can be sure that the paint will stick well and leave a smooth, durable finish. Additionally, keep in mind that priming can help paint cover better and last longer. Use it if necessary.

To prevent drips and get a polished finish, paint using multiple thin coats and steady, even strokes. It’s important to be patient and wait for each coat to completely dry before adding another. Lastly, for added durability—especially if your cabinet will be used frequently—think about applying a topcoat.

You can give your cabinet a brand-new appearance that you’ll love for years to come by carefully selecting your paint and following these instructions.

The material of the cabinet, the desired finish, and the location of the cabinet all need to be taken into account when selecting the paint. Choose a high-quality paint that complements the surface of your cabinet (wood, laminate, or metal), and choose a finish (matte, satin, or gloss) that reflects your personal style. For optimal results, prepare the cabinet by cleaning, sanding, and priming it before painting.

Video on the topic

How to paint furniture with a roller. Furniture restoration

Furniture paint Chalk Velvet from Aturi Design, color: Young Prince

Paint for furniture and doors

🎨 How and What to paint FURNITURE / Furniture painting / DIY

BEST PAINT FOR FURNITURE AND DECOR – ATURI

HOW TO REPAINT FURNITURE? I buy the material! detailed video!!! step 1

Furniture paint will paint, repaint, paint everything!

How to repaint furniture. Part 2. All about paint, primer and tools