Finishing a bathhouse’s brick walls, or any other structure intended to last for generations, requires special consideration. Your choice of finish should consider more than just appearance; it should also preserve the building’s structural integrity and lengthen its lifespan. The correct finish can make a big difference, whether you’re working on new construction or restoring an older one.
We’ll look at the best techniques and supplies for finishing brick walls in this post, with an emphasis on both functional and aesthetic factors. Whether you want a more modern and sleek appearance or a rustic, traditional look, you’ll find advice on how to select the best finish for your particular requirements.
Gaining an understanding of the distinct qualities of brick as a material is essential to producing a finish that is both aesthetically pleasing and durable in a variety of settings. After reading this guide, you’ll be equipped with the knowledge you need to preserve and enhance the brick walls in your bathhouse or any other treasured building, making sure they endure over time.
Aspect | Details |
Material Choice | Select materials that can withstand high humidity and temperature fluctuations typical of bathhouses. |
Insulation | Ensure proper insulation to maintain energy efficiency and comfort inside the building. |
Moisture Protection | Apply waterproofing solutions to protect brick walls from moisture damage. |
Aesthetic Finish | Choose finishes that blend well with the traditional or modern design of the structure. |
- "The bathhouse does not tolerate haste"
- Internal finishing work
- Tools
- Materials
- Stages of short stops
- Video on the topic
- Installation of profiles under a ventilated facade. Mounting on brackets using rivets
- The ideal SHELF for a BATH #bathwithyourhands
- Interior Finishing of the Steam Room in a Bathhouse from Blocks | All Stages of Interior Finishing in 4 minutes
- Insulation of the roof of a private house with polyurethane foam | Profi-PPU
- Finishing the steam room in the bathhouse (all stages of hidden work)
- Installation of the first row of panels
- Insulation of the steam room in the bathhouse
"The bathhouse does not tolerate haste"
When creating a brick bathhouse, there are several methods for building walls. A unique air gap of three to five centimeters is left inside the wall when it is laid. The brick heats up to 90ᵒΡ in hot weather, and the air gap controls the temperature. With a heat-insulating backfill in between the brick rows, the wall laying has a well-like appearance. The sawdust, sand, lime, expanded clay, and slag that fills the empty space is called backfill.
Note: Lime mortar is applied to each layer in accordance with the advice of experts.
Insulation is affixed to the walls from the interior. Ready-made slab insulation offers the requisite thermal insulation. The following materials are taken: lightweight concrete, polystyrene foam, kostromit, arbolite, and fibrolite. The wooden slats that are inserted into the plugs of the masonry seams are secured to the slabs using synthetic ligaments or clamps. Recall the air space that needs to exist between the bath’s internal and external insulation.
Making the right material and technique choices is essential when finishing the brick walls of a bathhouse or long-lasting structure. The objective is to produce a surface that is both aesthetically pleasing and long-lasting, capable of withstanding the unique elements of a bathhouse, like heat and moisture. This article will help you choose the appropriate finishes that will improve the brickwork’s appearance while safeguarding it for future generations.
Internal finishing work
When all work on connecting communications, testing, and reliable operation is finished, the walls in a brick bath are finished. How to finish the bathroom walls and what kind of material to use (see. To help you answer these questions, a video and a ton of pictures are included in "Bath finishing: choosing and doing." The material may vary, but the cost and pictures of completed bathrooms decorated with clapboard eliminate the possibility of using alternative materials. Thus:
- The advantages of clapboard include good drying (humidity no more than 12%), it “breathes” well and the only condition for finishing is dry weather when working outside and the presence of a warm room when cladding inside.
- Modern technologies have radically transformed the life of mankind. Walls decorated with this material do not require additional processing, and the appearance can be given any look, like timber or logs, they can be positioned horizontally or vertically, or you can use a combination.
The rooms where the walls inside the bathhouse are finished with wood are warm, not too humid, comfortable and not so expensive if the work was done by hand. The lining for finishing the bathhouse has many advantages. - External attractiveness.
- Long service life.
- High-quality thermal insulation and soundproofing.
- Moisture resistance is provided by impregnation with a protective compound.
- All utility lines and defects of the masonry are hidden under its surface.
- Ease of performing facing work and processing.
- Universal material suitable for covering the ceiling, walls, floors.
- Belongs to environmentally friendly materials that have a beneficial effect on the human body and health in general.
Setting up the required instruments, supplies, and consumables is the first step towards finishing the walls in the bathhouse.
Tools
- Construction stapler with staples.
- Perforator, electric jigsaw and drill with screwdriver and screwdriver attachments.
- Hangers, triangle, hammer.
- Mounting cord, plumb level.
- Self-tapping screws of 3.5 and 7.5 cm for wood, 2 cm clamps or nails, 6 cm screws for quick installation work.
Materials
- Lining boards, purchased in sufficient quantity and determined by calculation.
- Insulation by choice from a variety of offered materials.
- Film for hydra and vapor barrier.
- Wooden beam 4×5 cm for making the lathing.
Stages of short stops
Materials react differently when the humidity in a room changes:
- It is better to lay out the resulting lining for a couple of days in the room where it will be installed, so that it lies down and is saturated with the microclimate where it will serve for a long time.
- The washing compartment is sheathed with lining with a special impregnation. It prevents the growth of mold, the absence of black spots on the surface, protection from insects that prefer wooden delicacies for lunch.
The impregnation is prepared on a water basis, is colorless and has an antifungal effect. The instructions do not contain complex, tedious and heavy work, everything is already behind and you can start finishing. - The lathing is assembled from timber. Assembly must be carried out strictly vertically and horizontally.
The hangers are attached with 6 cm screws every 60-70 cm. It is necessary to correctly set the bars at the top and bottom according to the level and plumb line.To obtain a flat surface, a mounting cord is attached to them. The bars are fixed to the hangers with screws 3.5 cm long. - Before installation, wooden parts should be treated with an antiseptic, which must be given time to dry completely.
- Finishing brick walls in a bathhouse with finished lathing continues by filling the gaps between the bars with heat-insulating material, this can also be mineral wool.
- Next, it is the turn of the waterproofing film, which is placed on top of the insulation and attached to the frame beams (lathing) with staples of a construction stapler. The film, in the places of joining, is laid with an overlap of at least 10 cm and insulated with special tape.
- The height of the room is measured, the boards are cut to size and in the required quantity, and the own lining of the bathhouse with clapboard begins.
Note: The boards must be thoroughly dried for at least two days and impregnated on both sides prior to installation. The steam room, laundry, and dressing room boards are all impregnated twice.
- Finishing the walls of a brick bathhouse begins from one of the corners of the room and is carried out along the perimeter of the room. The last strip is selected by width and cut to size in the joining corner.
It is better to fasten the decorative surface of the boards with clamps that are not visible. The clapboard is fixed with nails directly in the locks, they are also not noticeable. - When finishing a bathhouse with clapboard, special attention is required for door openings. The frame on them is made with special care and very evenly, here the proverb “measure seven times and cut once” is relevant, each time the width of the opening is measured before cutting the lining.
- The lining of window slopes is done in the same way as from plastic panels. A starting strip is attached, one end of the rail goes into the groove of the strip, and the other is attached to the beam, previously set vertically.
- The interior decoration of the walls of the bathhouse is considered complete after covering with varnish, which prevents changes in the texture and color of the wood. Stain, which gives the slats the desired shade to achieve harmony in the design of the room, protective wax or oil.
Note: Painting and varnishing are not applicable to the steam and laundry room’s lining.
Whether for a bathhouse or a long-lasting structure, finishing brick walls requires striking a balance between practicality and beauty. You can improve the walls’ appearance and longevity by using the appropriate materials and construction methods, making sure the walls fulfill their intended function and look fantastic.
It’s critical to take into account the particular circumstances of the area. Moisture resistance is important for a bathhouse, but longevity and classic design are crucial for a structure that will be used by future generations. In addition to protecting the structure, proper waterproofing, insulation, and finish selection will increase its worth and comfort.
In the end, a building’s longevity and aesthetic appeal can be greatly impacted by the work required to finish its brick walls. Making a new legacy or conserving a portion of history will both benefit from taking the time to do things correctly now and in the future.