Facing walls and partitions using the Knauf system: what are the advantages, what is included in the kit and what is the consumption rate of the material

The Knauf system is a dependable and effective solution for finishing walls and partitions. Due to its many benefits, this system is a well-liked option for both commercial and residential projects. Knauf offers a solution to suit your needs, whether you want to increase fire resistance, improve sound insulation, or just create a smooth, even surface.

The comprehensive approach of the Knauf system is one of its main advantages. Everything you need for the project is included in the kit, including metal profiles, fasteners, and premium plasterboard. Even individuals with no prior construction experience will find the installation process simpler and guaranteed to be compatible with this all-in-one package.

While planning your project, it’s also critical to comprehend the rate of material consumption. The Knauf system has guidelines on how much material is required per square meter in order to maximize efficiency. By doing this, you can reduce waste and stay within your budget.

Advantages Kit Components and Material Consumption
1. Quick and easy installation Knauf system includes profiles, plasterboards, screws, and joint filler. On average, 1m² of wall requires about 3-4 profiles, 1 sheet of plasterboard, and 0.5 kg of joint filler.
2. Smooth and durable finish For a typical partition, you might use 20-25 screws per m² and 0.5 kg of joint filler for seams.
3. Excellent sound and thermal insulation Profile spacing is usually 60 cm, and plasterboards are installed with minimal gaps to ensure insulation effectiveness.

Knauf wall cladding system

Navigating pages

In many repair projects, gypsum plasterboard finishing material is utilized. It’s used for partitions, arches, and wall and ceiling alignment. If you want the job done right, you have to follow the guidelines. Global manufacturers produce complexes to make the job easier.

Features

Installing KNAUF gypsum plasterboard sheets is essentially the same as working with other gypsum boards. Still, the producer creates the elements required to create a plasterboard surface made of gypsum. A system is any set of materials put together for wall cladding. Because all the parts are meant to work together, the task is made simpler. There’s no need to consider adding any non-standard components.

Advantages of using technology

All the components required to create a partition or wall cladding are included in the KNAUF complex. There are benefits to this:

  • use of high-quality materials that guarantee a long service life;
  • ease of calculating the materials required for installation;
  • the KNAUF kit includes detailed assembly instructions;
  • if you purchase gypsum board and accessories separately, some small parts are often forgotten. Everything is included in the kit.

Every design, such as double sheathing or regular partitions, has a specific function.

Types of gypsum board used in KNAUF systems

The following kinds of sheets are included in the wall cladding gypsum board kit:

  1. Gray gypsum board – thickness from 9.5 mm. used in rooms with moderate humidity.
  2. Green moisture-resistant sheet – systems with such sheets are used in damp rooms.
  3. Green with red inscription, combined – a combination of moisture-resistant and fire-resistant materials.

Both frame (metal lathing from profiles) and frameless (gluing sheets with adhesive) techniques are used to produce wall cladding systems.

For contemporary interior construction, the Knauf system of facing walls and partitions provides an effective and economical solution. It comes with all the components, including fasteners, profiles, and gypsum boards, required for a simple and rapid installation. With a simple consumption rate that guarantees little waste, the system is made to save time and materials. This makes it the perfect option for experts and do-it-yourselfers alike who are searching for wall finishing projects that are high-quality, long-lasting, and reasonably priced.

Knauf installation technology: plasterboard, walls and partitions

The installation technology used by Knauf is not all that dissimilar from the widely used methods for building partitions and wall cladding.

You have certain guidelines to follow when assembling the structure:

  1. gypsum plasterboard sheets are fixed to a metal, wooden frame from the center or from the corner. This is done so that the sheet does not deform. NK 11 screws are used for fixing.
  2. To create a strong joint between the sheets, they are mounted tightly to each other, without leaving a gap.
  3. GKL is mounted so that there are no cross-shaped seams. Sheets on the surface must be shifted.
  4. To use the frameless method, you need to choose 12.5 mm sheets.
  5. For gluing sheets, PERLFIX glue is used. After gluing, the master has 10 minutes to align the sheet on the surface.
  6. When laying heat-insulating material for fastening GKL to the frame base, the kit includes 35 mm screws for a wooden base and 25 mm for metal profiles.
  7. Knauf profile is cut with metal scissors.
  8. Soundproofing tape is applied to the guide profiles before fixing.
  9. For good soundproofing, it is necessary to retreat at least 50 mm from the rough wall to the guide.
  10. If a partition of the Knauf system is created, with a room height of 2.80 m, the door leaf should be 90 cm wide and weigh up to 25 kg.

Which surfaces can I use the cladding on?

The Knauf design can be used for floors, walls, and ceilings.

Frameless technique suitable for brick and concrete walls. Selecting the appropriate primer is essential when installing the system with this method.

If the room is damp, the walls have a tendency to get damp, and more material is needed to improve thermal and sound insulation, the frame method is used.

  • there are kits for creating suspended ceilings;
  • kits for work in the attic – fastening from the rafters.

Kits for Knauf gypsum board are installed on a variety of surfaces. Each of which must adhere to specific regulations and meet its own requirements.

How much does cladding cost

Knauf generates a vast array of complexes that can be applied to different surfaces in different configurations. The cost structure is determined by the materials (GKL 9.5 mm or 12.5 mm) as well as the system’s complexity (a suspended ceiling has many moving parts).

Of all the sheets, fireproof GKL is the most expensive. Installing double cladding with sheets is also significantly more expensive than doing so in a single layer.

How effective is Knauf gypsum board/walls/partitions technology: heat consumption standards

Knauf kits include heat, materials listed in the "List of polymeric materials and structures approved for use in construction by the USSR Ministry of Health" – M. 1985, and soundproofing materials in accordance with GOST 9573-96, 21880-94, and 10499-95. reaching a determination regarding adherence to the hygienic requirements outlined in the Russian Federation’s legislation.

KNAUF systems use materials that are specifically calculated for each scenario in order to maintain heat consumption standards in the room (dry but cold rooms, wet rooms).

Only the frame base has the heat-insulating layer laid upon it. Insulation cannot be used in a frameless manner.

Sheathing walls with plasterboard: is it possible to do it yourself

There is no need to hire a master because each kit comes with comprehensive instructions for installing the GKL system. But keep in mind that the GKL sheet has weight of its own, so lifting it by yourself using glue or on the ceiling will not be simple during some installation tasks.

Experts are familiar with the complexities of working with different systems, so there is no chance of error and you will receive a sturdy, long-lasting structure.

Examples: video lessons

The following video illustrates the use of the frameless method:

In the video, soundproofing of walls with a single layer of sheathing

Putting together a partition using two layers of sheets and KNAUF GKL:

KNAUF is a multinational producer of profiles, mixtures, and sheets of gypsum plasterboard that are extensively utilized in a range of installation and maintenance tasks. By using KNAUF systems, you can cut down on the time you spend buying supplies, simplify your work if you’re doing it yourself, and prevent mistakes that could end up affecting the entire structure.

There are several benefits to using the Knauf system for wall and partition facing. Its parts are made to fit together perfectly, guaranteeing a superior finish that is both aesthetically beautiful and long-lasting. This system makes the process of building a new project or remodeling an existing one easier to understand and manage, even for individuals with no prior construction experience.

Everything you need, including joint fillers, fasteners, and plasterboard sheets, is included in the Knauf kit. By ensuring that all materials are compatible and saving time, this thorough approach lowers the possibility of problems during installation. Furthermore, by having precise guidelines on material consumption, you can better plan your project and cut down on waste and additional expenses.

To sum up, the Knauf system is a sensible option for anyone wishing to finish walls and partitions professionally. It is a wise investment for any building or remodeling project due to its simplicity of use, extensive kit, and effective material usage.

Video on the topic

KNAUF: installation of window cladding – we install and sheathe the cladding frame

Sheathing walls with KNAUF plasterboard. Installation of plasterboard on walls

How to make cladding with your own hands? Instructions from KNAUF

Partition made of moisture-resistant PGP Knauf. Installation of tongue-and-groove slabs PGP Hydro in Yekaterinburg

Partition S 362 from KNAUF-Superlists: detailed installation technology

Cladding walls with acoustic panels KNAUF. How to make soundproofing?

Cladding walls from KNAUF sheets

What interior style do you like the most?
Share to friends
Veronica Gerasimova

Interior designer, author of books on the design of residential premises. I will help you make your home not only functional, but also beautiful.

Rate author
Vash-Variant.com
Add a comment