Facing round columns: design ideas

Any space can benefit greatly from round columns as an architectural feature, but figuring out how to best showcase them can be difficult. There are many inventive ways to face round columns, whether your goal is to improve the aesthetic appeal of your house or give a distinctive touch to a commercial space.

The options are endless, ranging from elegant and contemporary finishes to traditional and elaborate designs. You can make the columns the center of attention in the space by selecting materials and styles that go well with your current furnishings. This post will look at a variety of design concepts to help you take full advantage of these unique architectural features.

We’ll go over a variety of strategies, from bold and intricate to understated and basic, to help you find the ideal one for your project. Instead of just serving as a structural component, your round columns can become the focal point of your room with the appropriate design.

What columns can be made of

The material that is used to make cladding columns determines its technology. They are currently poured using concrete mortar. First, the solution is gradually poured into a special form made of plastic rings. Use these to get the solution ready:

You won’t be able to complete all the steps by yourself because the process is labor-intensive. Round columns are thus created.

Use this for tetrahedral columns:

What must be supplied is:

  • That is, these are the materials that have directly proportional shapes. They are also used to create polyhedral columns.
  • The most important thing is that the column facing unit must be of high quality, since it will serve as the basis for finishing the column and, as a rule, it goes at the very bottom of the structure.
  • Their further direction and location on the surface will depend on how exactly the finishing materials are located on it.

View images of various shaped and sized columns as examples.

Materials that are used for facing columns

Nearly all contemporary finishing materials are used in column tiling technology. It might be:

  • Decorative or natural stone.
  • Plaster.
  • Paint.
  • Decorative panels made of metal or plastic.

Suggestions. It is important to keep in mind that cladding a round column requires a bit more work and time than a straight-angle column.

  • This is due to the unusual shape that the finishing materials can take.
  • For this reason, ready-made elements of such a structure made of marble or granite have become popular.
  • All of them are fastened together with special glue or concrete mortar and are securely installed on a strong, stable base.

Suggestions. The base needs to be connected to the floor and be monolithic. Additionally, the column is fastened to the ceiling using unique metal fasteners.

Decorative and natural stone in the cladding of columns of any shape

These materials have long enjoyed great popularity. Their technical indicators are similar, but their strengths differ. Thus:

  • Natural agglomerate is considered the most durable and reliable.
  • After it comes artificial stone, which is made from concrete mortar with the addition of synthetic and acrylic agents.

Stones, both ornamental and natural:

  • Strong and reliable. Both surfaces can withstand significant mechanical and physical loads.
  • Not exposed to humid environments. This property does not apply to decorative stone, which is made from gypsum dough. Its surface must be covered with a special protective layer.

Suggestion: In order to use decorative gypsum stone in damp rooms, it is best to apply varnish to the entire surface of the stone after installation if it does not already have a protective coating.

  • Practical, since their surface does not require special care and cleaning. They do not absorb dirt.
  • Durable. The life of a natural agglomerate is higher than that of artificial stone, but on average, both material can be used for 20-25 years.
  • Do not burn and are not able to deform their structures from exposure to high temperatures or from a direct source of fire.
  • They freely tolerate frosts, which makes it possible to use them for decoration of columns of both internal and external.
  • Do not burn out under the influence of sunlight.
  • Round columns using such materials are very easily performed, since there are various forms of stones.

Suggestions. It is important to keep in mind that natural stone has a fairly large mass by nature. It is independent of the size of the final component. Because of this, the surface gets more intense prior to the material being installed.

  • With decorative stone, such difficulties will not arise, since its mass is several times less than natural agglomerate. Any quality surface can withstand it.

Because there are many imitations of agglomerate, decorative stone looks exactly like natural stone. The pricing will be where they diverge most. Natural stone is most costly. Stones of both varieties are friendly to the environment.

Installation of natural and decorative stone on the surface of a column

When employing these materials for the facing of round columns, excellent surface preparation is essential. Such work is done in the following ways:

  • Alignment.
  • Cleaning.
  • Priming.
  • All this can be easily done with your own hands and without the involvement of specialists in this field.

Advice: It is essential to use a thin reinforcement mesh for reinforcement when leveling the surface in the case of installing natural stone.

  • Concrete mortar or plaster is used for leveling.

Suggestions. Plaster should only be applied to a brick surface after using concrete mortar, which is the ideal method.

  • Initially, a reinforcing mesh is attached to the surface using nails or any other devices and then the plaster solution is applied to it.
  • The first plaster to be applied to the surface is the “start” plaster. It has a coarse-grained structure and is sold in powder form.
    This powder must be poured into a container of a certain volume and the required amount of water must be added to it. There are instructions for this, according to which all actions are performed.

Suggestions. During the mixing process, it is best to use a construction mixer to give the plaster solution homogeneity; if one is not available, a regular drill with a special attachment can be used in its place.

  • The plaster must be applied in small layers, which will allow each of them to dry well. Then they are processed with sandpaper.

Suggestions. Large-cell sandpaper is required for processing the initial plaster due to its large grains.

  • Very often, only starting plaster is used for facing any decorative elements in the process of leveling their surface, but not finishing plaster. On the one hand, such actions can be considered correct, since the "finish" plaster is able to hide the defects of the "start", and if the surface is simply faced, then it is not required.
  • After all layers of plaster have completely dried on the surface, you can proceed to priming it. For this, it is best to use a roller, which has a larger painting area than a brush.
    This will save time and effort.

You will require the following in order to install a natural or artificial agglomerate:

  • Concrete solution or glue.
  • Spatula for applying the product to the back of the material.
  • Tile cutter, which will allow you to align the edges of the stones or trim their sizes.
  • Building level, according to the indicators of which each finishing element is exposed and only then firmly fixed to the surface.

Advice: Using cross-shaped beacons is not necessary when installing ceramic tiles to ensure an even distance between them because, in most cases, stones (both natural and decorative) are attached closely to the surface of the column.

The procedure for applying natural agglomerate to the surface of a circular concrete column is demonstrated in the video.

Classic Stone Elegant and timeless, stone facing adds a natural look to round columns.
Wood Veneer Provides a warm, rustic feel, making the space cozy and inviting.
Modern Metal Offers a sleek, contemporary look with materials like brushed steel or aluminum.
Tile Patterns Allows for creative designs with various colors and shapes, adding texture and style.
Painted Finishes A versatile option that can match or contrast with the room’s decor.

Round columns facing one another present a special chance to improve any space’s aesthetic appeal. You can turn these architectural features into eye-catching pieces that go well with your overall decor by using different design concepts.

There is a large selection of materials and styles to pick from, ranging from traditional stone veneers to contemporary geometric patterns. Adding texture and depth to your columns through experimentation with various finishes will make them both fashionable and useful.

You can accentuate the beauty of your columns even more by adding decorative accents or incorporating imaginative lighting. Round columns can become the center of attention in your space with the right design choices, regardless of your preference for a sleek, modern aesthetic or a more traditional one.

The design possibilities for facing round columns are only limited by your creativity. This post looks at stylish, functional ways to make round columns look better in your room, ranging from sleek, contemporary finishes to more traditional, textured looks. These tips can help you turn regular columns into striking elements that go well with your overall design, whether your goal is to make a big statement or a subtle accent.

Video on the topic

Unusual brick columns

Round concrete column manufacturing.

Cladding columns and floors with natural stone part 3.

Concrete round columns 2.

Columns made of broken tiles

BashGroup. Column cladding AstInvent

Column cladding

What interior style do you like the most?
Share to friends
Veronica Gerasimova

Interior designer, author of books on the design of residential premises. I will help you make your home not only functional, but also beautiful.

Rate author
Vash-Variant.com
Add a comment