Facing facades with granite and granite slabs

Here is a quick synopsis of the piece:

Granite’s durability and ageless beauty have long been appreciated. Granite and granite slabs provide the ideal balance of strength and style for improving a building’s exterior.

When you choose granite for your facade, you are making an investment in a material that will look beautiful even after it is subjected to severe weather. This organic stone leaves a lasting impression in addition to increasing a property’s value.

This post will discuss the advantages of granite for facades, the various varieties that are available, and how to guarantee a faultless installation that endures over time.

Special properties of granite

What characteristics and attributes compelled producers to settle on a naturally strong material:

• It turns out that such a hard mineral is not only polished to a shine, but also a mirror surface of the material is achieved.
• Granite has many colors and each of them is unique in its own way, and after polishing it acquires a special range and looks luxurious, rich.
• Simply magnificent drawings are created from a selection of different colors and combinations of textures of the same materials.
• If thousand-year-old granite buildings are preserved, it means that this material copes well with temperature changes, it is not afraid of frost, high temperatures and their dynamics.
• It has the ability to retain heat and is a good soundproofing material.
• Granite stone does not require frequent maintenance, it is easy to clean from dust and traces of atmospheric residues.
• Granite in facade cladding allows you to forget about the problems of external walls and their repairs for decades.

Be aware that selecting a finishing color depends heavily on the cost and durability of the products you choose. Changing the color of the facade will require costly repairs.

• Black granite, rich and bright colors of red shades are considered expensive products.
• Gray granite is cheaper than others, but it is less durable.
• You can choose black or red granite with all the qualities inherent in this material, but at a lower price, if you save on gloss, or rather its absence. The surface of the granite is simply not brought to a matte shade.
• The quality of the finish is determined by several factors. A strong, smooth surface of granite, fastening is carried out with special solutions or fasteners, the work is not done by hand, but by highly qualified specialists.

Various technologies for fastening facade granite

Many technologies are used when applying natural granite to facades:

• The traditional method includes the method of fastening slabs on special adhesive solutions.
• Granite is produced for cladding ventilated facades, it has a smaller thickness. The fastening differs from the classic look, and granite is produced with a special ceramic finish.
  A set of works with granite tiles allows you to save money, and it is impossible to visually determine the difference.

Obtaining a monumental surface

By employing the "wet method," granite facing on the facade yields the most robust structure with a monumental surface:

• Preliminary preparation of the surface is carried out. Granite material requires a solid base, so old plaster or gypsum is completely removed.
  No need to remind that the remaining plaster can crumble over time, this will require repairs, and we are talking about a monolithic surface.
• The permissible deviation of a flat space per square meter can be no more than 2 mm. What does this size indicate?
• The surface must be without cracks, protrusions, holes, that is, carefully leveled. Otherwise, cladding a large surface will give differences in the edges of the slabs, which will cause a logical solution – to adjust the flaws with mortar.
  Here you can get stuck, the technological instructions often do not allow the use of a large layer of the mixture.
• What to do if there is a need to plaster the walls?
• You cannot rush to use granite for facing the facades of buildings, you should allow the time necessary for the plaster to dry completely.
• Then make notches every 5 cm if the surface is smooth, if it is rough, then there is no need for notches.

Note: The masonry is directed evenly by a number of beacon slabs that are positioned from below and above on both sides of the wall. Every slab is inspected both vertically and horizontally, and it needs to be positioned precisely evenly to prevent damaging the entire cladding.

• Granite for facing the facade has sufficient weight. Their laying should start from the bottom and go up.
• Rare cases of masonry the other way around have good reasons, one of them is the prohibition of mortar from getting from the upper slabs to the lower products.
• To support the first row, a wooden support is placed below. After the first row has set, the second one is laid.
• Each slab and the row as a whole are checked with a plumb line and a level.
• The tension of the cord, which serves as a guide for the upper part of the slabs, allows you to lay the rows evenly.
• After a certain section of the masonry has been completed, when the facade is faced with granite, it is necessary to grout the seams, but not earlier than a day later. The nuance is that the seams cannot be kept open for a long time.
• Grouting of the seams is carried out with special compounds based on epoxy resin.
• It is not only a reliable grout, but also does not allow moisture to pass through, the cladding of the building"s facade made of granite is obtained with a particularly durable surface, made using the traditional method.

Granite and granite slabs provide a classic and long-lasting option for facade cladding that improves a building’s resilience and appearance. They are a great option for building sophisticated and long-lasting exteriors due to their inherent beauty and range of textures.

Granite facades can withstand the weather and hold their beauty for many years with the right installation and care. For anyone wishing to improve the appearance of their property while guaranteeing long-lasting protection, this makes them an excellent investment.

Granite cladding is a great option for both residential and commercial projects because it can dramatically improve the aesthetic and value of any building, regardless of whether you choose polished slabs or a more rustic finish.

Granite and granite slabs used for facades give any building longevity and a high-end aesthetic by fusing the inherent strength of stone with an ageless style. This method is popular for both residential and commercial properties because it not only improves the structure’s aesthetic appeal but also shields it from inclement weather.

Video on the topic

Granite facade, 10 years and crumbled.

Granite porch.The process of laying granite.

Granite cladding design