Although plastering a ceiling may appear like a difficult undertaking, you can accomplish it on your own if you take the proper approach. Gaining the ability to plaster a ceiling can help you save money and feel proud of yourself for finishing a project yourself, whether your goal is to smooth out flaws or get ready for paint.
This post will walk you through the procedure step-by-step and break down the necessary tools and techniques. Additionally, we’ll include video instructions to help you follow along more easily. You’ll be well-prepared to tackle your ceiling plastering project at the conclusion.
- Rules for plastering the ceiling
- Preparation and priming of the plane
- How the starting layer is applied
- Video on the topic
- Beautiful and simple relief ceiling with your own hands
- How to make a ceiling.DIY ceiling.
- Without experience, inexpensively and quickly for the first time I made a decorative plaster on the ceiling
- Ceiling repair. Cleaning, primer, plaster, putty and painting the ceiling
- How to putty the ceiling for a beginner without experience
- Ceiling plaster by lighthouses! How to do it?
- Plaster ceiling. Layer 3 cm. Unusual method #14
Rules for plastering the ceiling
DIY ceiling plastering needs to be completed in a specific order and according to accepted guidelines. They have stood the test of time.
Let’s take a closer look at this matter and discuss the things you should focus on first. Below are instructions on these matters.
The following steps make up the putty process:
Preparation | The first stage is the preparation of the ceiling surface. During the preparation of the surface, all irregularities are removed, dirt is cleaned. At this stage, a hammer drill is used. |
Primer | At the next stage, the surface is primed with a special compound (see. How to prime the ceiling: we figure it out step by step), which has the ability to penetrate deep cracks. At this stage, a paint brush and roller are used. |
Applying the starter | At this stage, a preliminary layer of putty is applied. The function of this layer is to cover all small irregularities on the surface. It should be borne in mind that the finished solution is similar to thick sour cream. A metal polisher is used at this stage. |
Finishing | This stage is the final stage of applying the putty. It is recommended to apply the solution in two layers.If the room has ventilation and the temperature remains stable at about 18 degrees, then the finishing putty can be started four hours after applying the preliminary layer. If these conditions are not present, then the main putty should be applied only after a day. |
Whichever leveling technique you decide on, keep in mind that the ceiling needs to be primed before painting. You can use the same paint that’s going on the surface as a primer.
With the correct assistance, plastering your ceiling yourself can be a simple undertaking. This post provides easy-to-follow, step-by-step video instructions that simplify the process so that anyone can accomplish a polished, seamless finish without the need for specialized knowledge.
Preparation and priming of the plane
It will be harder to plaster the ceiling for painting than it will be for a simple recoat. After all, a flawlessly smooth and level surface is required in this situation.
The following order is followed for all work:
- First, you need to remove the old coating. This is wallpaper or paint (see. How to remove paint from the ceiling: do it yourself). We must see the base plane. If there are cracks, then they are expanded with a chisel.
- Now you need to decide on the application layer. To do this, just take a fishing line and stretch it diagonally. Then we will see everything at once;
- If the required layer exceeds two cm, then the coating will need to be applied in layers. First, do the alignment, this can be done with a simple cement composition. And then apply the finish, a gypsum composition is suitable for this. Here is not a large fraction and we will get a smooth surface.
- We need a high-quality base, for this the plane is primed. It is better to give preference to a deep penetration liquid. After application, let the surface dry completely.
Next, the work is completed in accordance with the plaster’s composition and the ceiling’s material:
- If this is a wooden covering, then lath is applied. After all, the solution will not simply stick to the wood;
- If this is concrete, then you need to make notches on the plane with an ax, then the composition will hold better;
- If the application layer is more than two cm, then it is imperative to attach a reinforcing mesh. It will strengthen the coating.
How the starting layer is applied
Two spatulas, one with a narrow blade and the other with a wide blade, are used to apply the solution.
- With the help of a narrow spatula, a little mixture is taken and applied to a wide spatula. You need to strive to apply the mixture on the central part of the blade. After that, the mixture should be applied to the ceiling, so that its entire surface touches the surface of the ceiling.
- Here a smooth plane is not needed for, we need to withstand its geometry. The layer is applied no more than two cm.
- We are waiting for the coating to dry. After that, you can apply the second layer. So cover the entire ceiling with the starting layer.
Step | Description |
1. Prepare the ceiling | Clean the surface from dust, old paint, or wallpaper. Make sure it"s smooth and dry. |
2. Apply primer | Use a primer to ensure better adhesion between the plaster and the ceiling. Let it dry completely. |
3. Mix the plaster | Follow the instructions on the packaging to mix the plaster to the right consistency. |
4. Apply the plaster | Use a trowel to spread the plaster evenly over the ceiling. Start from one corner and work your way across. |
5. Smooth the surface | Use a straight edge or a wide trowel to smooth out the plaster before it dries. |
6. Let it dry | Allow the plaster to dry completely. This may take several hours depending on the thickness. |
7. Sand the ceiling | Once dry, lightly sand the ceiling to remove any imperfections and achieve a smooth finish. |
8. Apply final touches | If necessary, apply a second coat of plaster or touch up any areas that need it. Sand again if needed. |
Although plastering your own ceiling may initially seem difficult, it is completely doable with the correct assistance and resources. You can gain confidence to complete each step of the process and a clearer understanding of it by watching instructional videos.
You can save time and money by achieving a polished finish by following the instructions and advice given. In addition, the satisfaction of finishing the task yourself gives your room a unique touch.
Never forget that perseverance and close attention to detail are essential for success. With patience and careful attention to detail, you can soon have a gorgeously plastered ceiling that will elevate the appearance of your room.