DIY wallpaper from paper: preparing tools and materials, the process of preparation and application

Making your own paper wallpaper is a fun and creative project that lets you add a distinctive touch of personalization to your space. This is an excellent chance to play around with various patterns, hues, and textures to give your walls a unique style that isn’t available in stores.

Acquiring the required tools and materials is crucial before beginning the process. In addition to ensuring that your homemade wallpaper sticks well to the walls and produces a long-lasting finish, proper preparation will streamline the process. Thorough planning is essential for a project to be successful, from selecting the appropriate paper to comprehending the procedures involved.

We’ll go over everything you need to know to get started in this article. This tutorial will assist you in realizing your DIY wallpaper project, whether your goal is to decorate a single wall or a whole room.

Steps Description
Gathering materials Collect paper, scissors, glue, and a ruler. You"ll also need a brush and a flat surface to work on.
Preparing the paper Cut the paper into desired shapes and sizes. Ensure the edges are straight for a neat finish.
Applying the glue Spread glue evenly on the back of the paper using a brush. Be careful not to use too much.
Placing the paper Carefully place the glued paper onto the wall, smoothing out any bubbles or wrinkles as you go.
Finishing touches Once all pieces are applied, allow the glue to dry completely. Check for any loose edges and press them down.

Advantages of this option

There are several unquestionable benefits to making your own decorative coating:

  • The most important advantage is the extremely low price of the composition. The components included in the composition are easily accessible, and the most important ingredient is waste paper, which is not a problem to find in sufficient quantities.
  • Wallpaper paper can be very different – from standard office sheets that have already been used, to newspapers and magazines. The main thing to remember is that the material must be of high quality – it is not recommended to use packaging materials and cardboard.
  • The instructions for preparing the finished solution are quite simple, you will not need special equipment and devices, a widely used tool is used, finding which will not be a problem.
  • You can make any required amount, from a small batch to a serious volume.

Making your own paper wallpaper is a fun do-it-yourself project that gives your room a unique flair. You’ll need some basic supplies and tools to get started, such as paper, glue, and a cutting tool. Preparing your paper, putting on adhesive, and carefully hanging the wallpaper on your walls are the steps in the process. You can create original, personalized wallpaper that expresses your creativity and sense of style with a little perseverance and attention to detail.

How to make liquid wallpaper

We’ll simplify everything for you by breaking down all the required processes into a few easy steps.

Preparing tools and materials

It is essential that you gather all necessary materials ahead of time to guarantee that the work proceeds smoothly and without unneeded complications.

The following items are required:

  • Paper, and it can be very different: from ordinary office drafts to newspapers, magazines and wrapping paper. Wallpaper or its remains will also do. Cellulose serves as a filler that provides good heat and sound insulation properties, so it is better to use high-quality paper.

It doesn’t matter if the paper is wrinkled; the final product’s quality will remain unchanged.

  • Warm clean water – it is on its basis that our decorative composition will be prepared.
  • Special tinting pigment for water-based paints. Its color is selected in accordance with your preferences and the design features of a particular room.

Numerous varieties of colorants are available for purchase.

  • Construction plaster or, as it is also called, alabaster. It is better to choose a high-quality composition, especially since it costs little, but it significantly affects the strength of the coating and the speed of its drying.
  • PVA glue, it makes the solution stronger and increases its plasticity, which in turn affects the ease of application. That is, it will be much easier for you to work, and the resulting result will be much better.

Purchases are made for the appropriate glue packaging based on the needed volume.

The following equipment and tools are required:

  • A drill or powerful screwdriver with a special mixer attachment for stirring and grinding paper into a homogeneous mass.

Mixer: an easy-to-use yet powerful tool

  • Any container for preparing and stirring the solution, the main criterion is ease of use.
  • A spatula or a metal grater is used for application, it all depends only on how convenient it is for you to work with a particular tool.

Cooking process

We will provide basic values for you to use in your calculations; you will need to multiply these values by two, three, or ten times, depending on the volume that is needed.

The following stages make up the relatively simple technology itself:

  • Any paper for wallpaper in an amount of 200 grams is taken, it is best to cut it into narrow strips, tear into small parts or grind it in any other way. All this mass is placed in a bucket and poured 1.25 liters of warm water.
  • The composition is left for about an hour so that the paper is well wet and saturated with moisture completely.

Counseling! It is preferable to check if the paper is wet; different materials absorb moisture at different rates, so stirring is worthwhile once you are certain that everything is prepared.

  • After that, using a drill and a mixer, the solution is stirred and crushed until a homogeneous cellulose mass is obtained.

This is the final mass as it appears.

  • Next, the composition is tinted in the color of your choice, to obtain a calm tone you will need 2 caps of the product, and if you need a more intense color, the amount of pigment is increased as needed.
  • The next component to add is PVA glue. You will need 20 grams of it, the solution is thoroughly mixed until completely homogeneous.
  • The final part of the preparation is adding gypsum. It is poured in last, since after this the mass must be immediately applied to the walls, otherwise the composition will harden in a fairly short time. Again, you will need 200 grams of alabaster, although you can change the volume empirically to achieve optimal hardening characteristics of the finished solution.

Counseling! Your creativity is the only limit when it comes to adding glitter, colored fibers, and other decorative elements to the finished product.

Application

The procedure is very straightforward and doesn’t really change from working with other compositions:

  • The surface must be pre-prepared – cleaned, leveled and treated with a primer.
  • The mass is distributed in an even layer over the surface using a spatula or trowel.

Within 30 to 60 minutes, the primary hardening happens, and the final hardening takes place in a day.

The application process is not too complicated.

Yes, that is a very sensible way to create wallpaper—the room is transformed and the paper is not thrown away.

Making your own paper wallpaper is an enjoyable and artistic way to add personality to your room. Even for novices, the process can be simple and pleasurable with the correct equipment and supplies. Making the necessary preparations in advance guarantees a seamless and polished outcome.

You may give your house a distinctive and personalized appearance by carefully following every step of the process, from choosing the right paper to hanging the wallpaper on your walls. To ensure the wallpaper adheres well and avoid common pitfalls, patience and attention to detail are essential.

After finishing your do-it-yourself wallpaper project, you’ll have a gorgeous room and the pride that comes with creating it yourself. With this project, you can give your house a unique touch without breaking the bank.

Video on the topic

DIY liquid wallpaper!!!

Application of liquid wallpaper! Made with your own hands from paper!

How to apply liquid wallpaper. Preparation of material.

Liquid STONE wallpaper # 10 DIY decorative piece: preparation and application.

DIY liquid wallpaper. Consumption, how to apply, paint and prepare.

What interior style do you like the most?
Share to friends
Dmitry Stepanov

Professional decorator with 10 years of experience. I know everything about renovating apartments, houses and offices. I will be happy to share my knowledge and experience with you.

Rate author
Vash-Variant.com
Add a comment