Dimensions of siding panels and calculation of material for cladding the house

It’s important to know siding panel dimensions if you intend to clad your house in siding. Selecting the appropriate size for your home not only impacts its aesthetic appeal but also establishes how much material you will require. Selecting the appropriate dimensions can help your project run more smoothly and economically.

Siding panels are available in a variety of widths, thicknesses, and lengths. These differences may affect how your home is installed as well as how it looks in the end. Making educated decisions and ensuring a perfect fit for the design of your home is made easier when you are aware of the standard sizes available.

Selecting the appropriate panels is not the only important step; determining the precise quantity of siding material needed is also crucial. This step entails taking measurements of the external walls, accounting for any windows or doors, and leaving a small amount of excess material in case installation errors or adjustments occur. Making the right calculations helps you avoid making unnecessary purchases and delays by preventing you from making too many or too few purchases.

This post will walk you through the various siding panel sizes and provide you easy instructions on how to figure out how much material you’ll need to finish your house perfectly.

Parameters of siding lamellas of different types

Each type of siding comes in a fairly broad range of sizes. Since there is no precise standard governing these indicators, you must consider both the serial line (brand) and the manufacturer when making your selection.

Strips, moldings, overlays, and profiles are among the extra products that will be needed for the job in addition to the coating’s primary components. They also come in a variety of sizes. But these are the typical and most widely used parameters:

  • outer and inner corner – 305 cm;
  • starting and finishing profile – 366 cm;
  • connecting or H-profile – 305 cm;
  • slope strip – 305 cm;
  • casing – 366 cm;
  • J-strip – 366 cm.

Note: The primary material calculation and the required number of additional elements are determined simultaneously.

Vinyl

This popular variety is composed of PVC. This is because they are not significantly worse than pricey equivalents, thanks to their good qualities and appealing price.

It is important to consider production technology and marking when selecting a product because plastic panels, particularly large ones, can become quite brittle when made using secondary raw materials.

The most typical vinyl siding panel size is:

  • Thickness – from 0.7 to 1.2 mm.
  • Width – from 23 to 27 cm. But the working indicator is much less – 20–25 cm. It is also taken into account that the lamella can be of a paired structure.
  • Length – 320–381 cm.
  • The area of ​​the part is from 0.60 to 0.85 m2 .

Up to 2 kg is the material’s slight weight. This lets you put together packages of twenty to thirty pieces.

Metal

Aluminum and galvanized steel are two types of metal siding. Because the first type is significantly less expensive than the second, it is more widely used. Although this kind of material is a great substitute for PVC products, the polymer type has a major flaw in that it changes color when exposed to UV light.

The metal type, on the other hand, can be made to order. In actuality, the material that is produced is a strip that is easily cut into the appropriate pieces in accordance with the structural scheme, saving extra money.

Typical product specifications:

  • Thickness – from 0.5 to 1.3 mm.
  • Width – 19-26 cm. Taking into account the working value – from 16 to 22 cm.
  • Length – 50-400 cm. The maximum parameter can be 6 meters.
  • Area – from 0.45 to 0.85 m 2 .

These lamellas range in weight from 3.9 to 5 kg. Typically, there are up to 10 pieces in the package. The size of the products determines the precise quantity needed in order to ensure easy carrying and transportation.

Wooden

Because of the qualities that resemble real wood, using this type of material lets you create a very good imitation of log walls. Producers attempt to create these panels with the closest possible measurements. This is explained by the possibility of warping with products that are too big.

The following are the parameters:

  • The best siding width is considered to be up to 14-15 cm.
  • Thickness – from 16 to 23 mm.
  • Length – up to 5 m, but the optimal value is up to 2-2.5 m.
  • Area – up to 0.88 m 2 .

These cladding panels can be purchased separately or in sets of ten.

Fiber cement

Because it costs more than its equivalents, this variety, despite having superior qualities, is not as well-liked as metal or PVC products.

  • Thickness – from 8 to 12 mm.
  • Siding length – up to 360 cm.
  • Width – 180–200 mm. Also available in 45 cm panels.
  • Area – 0.57–0.65 m2 .

Weights of elements range from 11 to 20 kg. Usually packed in bags containing 145–150 pieces.

Technical characteristics of basement siding

This type of finishing, which has a different sheet size than facade products, is used to clad a house’s base. The required thickness of the cladding increases significantly because this area experiences the greatest mechanical load. While the products come in a variety of decorative qualities, the stone, brick, and wood chip options are the most widely used.

Key characteristics of the underground variety:

  • Length – from 112 to 121 cm.
  • Thickness – from 17 to 23 mm.
  • Width – 48–52 cm.
  • Two elements laid one on top of the other reach almost a meter in height. The total coverage area is one square meter.

Although there are many materials that can be used to make exterior foundation products, PVC panels, metal, and fiber cement are the most widely used.

Panel Size (inches) Panels Needed (for 100 sq ft)
12×48 25
8×48 37.5
6×48 50
16×60 15

Anyone intending to clad their home must be aware of the siding panels’ dimensions. These panels come in different sizes, so being precise about the measurements will help you plan ahead and make sure you buy the right amount of material without wasting any.

Although figuring out how much siding you’ll need for your project might seem difficult, it’s actually quite simple if you take the right approach. Measure the entire surface area of the walls you want to cover first. After that, take into account the size of the siding panels you’ve selected as well as any windows or doors that don’t need siding.

You can prevent expensive errors and guarantee a seamless installation process by taking the time to measure and calculate precisely. Your home’s exterior will have a polished, expert appearance that lasts for years with the correct preparation.

Knowing the size of siding panels and precisely estimating the quantity of material required when siding your home are essential for a seamless, effective installation. This guide will help you avoid costly mistakes and ensure that your home receives the perfect finish by breaking down standard panel sizes and providing easy steps to estimate the amount of siding you’ll need.

Video on the topic

Brick-like facade panels. Overview of materials, comparison and prices

HOW TO MEASURE A HOUSE FOR SIDING? How to calculate siding

Nobody knew how to independently calculate siding and not overpay! We tell you the secrets

What sizes are siding?

How to correctly calculate siding?

How to correctly take measurements of the facade of a house, building. Siding, facade panels. House sizes.

WHICH SIDING IS BETTER? Vinyl, metal, facade panels or fiber cement siding?

Vinyl siding! Secrets of installation and useful tricks that few people know about!

What interior style do you like the most?
Share to friends
Veronica Gerasimova

Interior designer, author of books on the design of residential premises. I will help you make your home not only functional, but also beautiful.

Rate author
Vash-Variant.com
Add a comment