Creating a frame from a metal profile for plasterboard

Making a solid and dependable frame is crucial for any wall decoration project to be successful. Plasterboard frames are commonly constructed with a precision and long-lasting method: the use of metal profiles. This method gives your walls a strong base, straightening and strengthening them so they are prepared for additional finishing touches.

Because of their durability, light weight, and ability to withstand deterioration over time, metal profiles are preferred. They are especially helpful in locations where wooden frames could be prone to pests or moisture. You can accomplish a polished, long-lasting appearance with metal profiles.

We will demonstrate how to build a plasterboard frame using a metal profile in this tutorial. These steps will assist you in creating a strong and even structure, whether you’re starting a new project or remodeling an existing space. By the time it’s all over, you’ll know just how to go about decorating your wall with assurance and a perfect finish.

Advantages of a metal profile

The lathing is made primarily of two materials: a metal profile and a wooden beam. The second kind of material is the one that is most ideal.

Metal profiles are what they are because of these features:

• For the most part (with proper storage and transportation) – has no drawbacks (curvature). But, if you choose a beam, you will have to sort through a lot of material.
• Metal elements can be used in almost any room, and also do not pay attention to temperature fluctuations. This means that the surface will not be subject to deformation.
• Galvanized parts can serve for a very long time. Therefore, they can be used even in rooms with a lot of moisture. They are also not affected by fungi and rot.
• For fastening the profile, there are various elements that allow you to create a reliable and strong structure.

Choice of material

It is important to consider the selection of required materials, particularly when making the lathing’s specific details. Plasterboard walls can be framed using any of the following types of profiles:

1. Guide (PN). This element is designed to create a structure that will serve to secure the rack profile. It is from the fixing of this type of profile that the appearance of the surface in the future will depend.
2. Rack (PS). Used to create lathing or other partitions. It can be given various curvilinear options.

Parts for ceiling structures, such as ceiling guide profile (PNP) and ceiling profile (PP), are located in a different area.

You ought to think about the possibility of utilizing these extra components as well:

• Corner profile (PU). Can be external and internal.
• Arched profile (PA). Used to create arches.
• Suspension (U-shaped). Used to attach the structure to walls and ceilings.
• Connector ("Crab"). Very convenient for fastening perpendicular parts together.
• Extension. Connects different sections of the profile together.
• Dowel and self-tapping screws (for metal).

This is the point where a lot of people make a critical error. It entails making a non-specialized profile purchase. Specifically, they mix up ceiling and wall elements.

For sturdy and level walls or ceilings, making a plasterboard frame out of a metal profile is a useful and efficient solution. This technique makes it simpler to achieve a smooth and polished finish by giving plasterboard a stable framework to be attached to. In order to ensure everything is level and aligned, the metal profiles must be measured, cut, and secured in place. Even do-it-yourselfers can update their spaces with dependable, long-lasting walls or ceilings that are prepared for plasterboard installation by following a few easy steps.

Necessary tool

Without specialized tools, it is obviously impossible to fasten a metal frame beneath drywall. But fear not—all the necessary supplies will always be available to any home craftsman.

Jigsaw with metal saws or scissors for cutting galvanized metal.

Take note! It is important to note immediately that a grinder is not suitable. The explanation is very straightforward. Such a tool has a very thin galvanized profile and a very high torque. As a result, the material being cut heats up and deforms quickly. Additionally, rust will start to show up and the protective layer will be destroyed.

Installation work

The instrument is waiting in the wings, along with everything that needs to be ready. It appears that you can get to work right away. Though you shouldn’t rush, the sooner you begin, the sooner everything will be finished. You must first choose the tasks that will be completed. The frame installation process has unique requirements depending on the kind of work being done.

Walls

Working with walls is thought to be the easiest in theory. If it does not conflict with the stages of the repair process, it is best to begin with it.

Guidance! To prevent any unwanted (rattling) noise, a sealing tape is glued between the surface and the guides after the metal lathing is installed.

• Creation of the frame begins with marking. It is best if the profile is as close as possible to the attached surface. But this rule does not apply when additional insulation or communications are planned. Marking starts from the floor and transfers the data to the ceiling. Now you can make marks on the side walls and directly on the main surface. Consider that the step of the rack profile is 50-55 (up to 60) cm.
• Drilling is made for fastening elements. You can immediately install U-shaped brackets.
• It is time to fix all parts of the structure. First, they put PN – a closed structure is obtained, into which SP is inserted. Using self-tapping screws for metal – screw them together (from below and from above). Rack elements are attached to hangers.

One feature of hangers is that they are not just for profiles. In other words, protruding "ears" develop. They must be curved. In order to avoid getting in the way of the gypsum board installation, this should be done inside.

Horizontal ties are utilized to add extra rigidity to the drywall frame if it is required. From the profile itself, which is cut to the desired size (with a small margin), they are simple to make. Observe how they are fastened.

It’s usually done in this manner:

1. Use metal scissors to cut the ends of the profile along the ribs.
2. Bend the ribs. Through them, screw the ties to the posts. The central section is left without a screw, otherwise you will get a bump.

Partitions

These constructions are designed to divide the space and to keep one entirely apart from the other. Although there are some technical differences, the work plan is essentially the same as the one that was previously presented.

1. First of all, you should understand that the partition requires sufficient rigidity. This is especially taken into account when the structure does not have support from two capital walls.
2. The work begins with fixing the guides. For this, use a dowel with a screw, taking into account the step – 45-50 cm.

Be aware that the layout of the partitions with doorways should be carefully considered. Of course, this means cutting the lower guide and adding more vertical posts.

Now vertical posts are installed. They are fastened together with horizontal ties. The posts are fastened with the front side to one of the walls. That is, it turns out that both sides of the partition have a rib for fastening the gypsum board. Therefore, if serious insulation or wiring of communications is planned, then a profile of the required size is selected.

A wooden beam of a suitable size is inserted into the side elements (ends). This is necessary for reliability.

Features of creating door and window openings

Making multiple openings in a metal profile frame for drywall is a common requirement. Doors are handled in the following ways:

• The door frame is assembled. Into which, first, the door leaf is hung. To set the necessary gaps (after all, the frame is not fixed) – wedges made of fiberboard or hardboard are inserted.
• Now they start to put up the racks that adjoin the doorway. They are set vertically and reinforced with a wooden beam. Apply mounting foam and tighten the frame with self-tapping screws.

Note: Since this is a labor-intensive method, it is most effective when the doorway was not provided beforehand. Because of this, it is best to take your time choosing the size of the door leaf and to do the initial marking and calculations. Subsequently, you can immediately create a doorway (allowing yourself the necessary space) and install the door in it.

When designing a skylight, certain elements are necessary:

1. It is necessary to install two horizontal lintels (top and bottom).
2. It is better to make vertical posts with wooden mortgages.

Anyone wanting to build strong, long-lasting walls must know how to build a plasterboard frame from a metal profile. The durability and stability of your construction are guaranteed when you use metal profiles, which is why DIY enthusiasts and professionals alike favor this option.

It’s critical to take exact measurements and make sure that every profile is firmly fastened throughout the process. By paying close attention to details, problems can be avoided later on and the plasterboarding process can be completed more quickly and effectively. Having the appropriate equipment and supplies is also essential to producing a high-quality outcome.

Remember how important preparation and planning are. You can save time and hassle by properly marking out your space and double-checking your alignment. By doing these steps, you give your plasterboard a strong base and guarantee a level, smooth surface that is ready for finishing touches.

In the end, learning how to make a plasterboard metal profile frame improves your construction abilities and gives your walls a polished appearance. For precisely straight and long-lasting walls, this method provides a dependable solution, whether for a new build or renovation project. Your reward for embracing the process will be a job well done.

Video on the topic

PARTITION made of plasterboard, double CD profile. Partition wall, plasterboard.

wall cladding with windows, profile arrangement option. Installation of plasterboard.

how to cover pipes with a plasterboard box. Installation of gypsum board in the bathroom.

Metal frame for plasterboard

A plasterboard box is the most reliable and strong profile connection

How to make a frame for plasterboard on the ceiling