Colored facade plaster

More benefits can be obtained from colored facade plaster than just keeping the outside of your house safe. It is essential in establishing the general look and feel of your home. The correct choice of colored plaster can make a big difference, regardless of whether you’re going for a more traditional finish or a sleek, modern appearance.

The possibilities for personalizing the facade of your home are endless when it comes to colored facade plaster, which comes in a vast array of textures and shades. But this kind of plaster isn’t just for show; it also resists weather and is durable, which helps keep the underlying structure intact.

This post will discuss the advantages of utilizing colored facade plaster, the various varieties that are available, and how to pick the best one for your project. Knowing your options will help you finish a new construction or renovate an existing building to give your house the ideal appearance.

Colored plaster for facades

Both dry compositions that must be diluted with water and ready-to-use mixtures are used to produce colored facade plaster. The latter comes at a higher cost because no further preparation is needed before using the material.

Colored plaster used for decorative facades varies in several ways.

• Material composition. Binding agents – cement, acrylic, silicone resin, liquid glass, to which various fillers and pigments are added.
• Texture. Using different types of plaster, types of relief surfaces of facade walls are created.
• Filler fractions. There are compositions with fine-grained or coarse-grained filler. There are mixtures that combine both options.

Types of colored plaster

There are numerous unique mixtures available that offer superior facade finishing. Types of colored facade plaster are separated based on composition and intended use. The images of coated surfaces are shown below.

Mineral plaster

Composed of modifiers to provide increased wear resistance and plasticity, clay, crushed stones of various fractions, lime, and Portland cement. Coloring pigments are added sparingly because a high concentration of these compounds weakens the material.

The temperature range that mineral plaster can withstand is -30 to +45˚. 15 years is the service life. The combination is made industrially as a powder that is diluted with water. utilized to produce basic textures.

The color range of mineral facade plaster is considerably restricted, making it unsuitable for bright finishing. Only after finishing is it possible to paint the surface the desired color.

Silicone plaster

The base is made of silicone resin that has been colored and reinforced with fillers to make it more resilient to UV light. Because of its resistance to salt, it can be finished in coastal areas.

Ideal for structures composed of bricks, concrete blocks, and aerated concrete. used in plinth finishing as well. offered as a prefabricated item.

Colored silicone plaster has a 20–25 year shelf life. used to create traditional textures in décor.

Acrylic plaster

Composed of fillers, modifiers, and dyes added to synthetic resins (quartz, natural multicolored marble chips). A glossy surface is provided by minerals. characterized by strength and resilience to alterations in temperature, wind, and moisture. The base of the mixture’s acrylic, which is elastic, lessens the chance of cracking.

It is advised to apply a water-repellent coating to the surface because colored acrylic finishes get dirty easily. Its sensitivity to sunlight is another drawback; with time, the coating’s colors deteriorate.

Customers can choose between the completed product and a mixture that can be colored with coloring paste to achieve the desired shade. Mineral wool and cellular concrete are not covered with this plaster.

Life of service: 25 years.

Silicate plaster

It is made from liquid potassium glass, which solidifies to take on the characteristics of a solid. Its structure is the most elastic, making it appropriate for completing building facades. Depending on the kind of surface texture the mixture is meant for, the percentage of mineral filler can vary.

This kind of facade plaster is available in a vast array of colors and textures. Due to silicate’s resistance to atmospheric precipitation, it is more expensive than other finishing mixtures on the market.

Suggested for installation on aerated concrete, wood, and concrete walls. Oil-painted surfaces, varnished surfaces, and polymer insulation cannot be covered. The concoction is provided as a prefabricated solution. Errors are eliminated by finishing quickly, so it is best to leave the work to the pros.

Vibrant facade plaster is a long-lasting and adaptable way to improve a building’s exterior while adding visual appeal and security. It provides a broad spectrum of hues and textures, enabling practically any desired appearance to be achieved while simultaneously weatherproofing the structure. Colored plaster is simple to apply and maintain, and it can greatly increase a home’s longevity and curb appeal.

Types of textures of facade colored plaster

You can achieve the necessary surface texture with mixtures containing fillers of specific fractions and specialized tools (roller, sponge, brush, float).

Different textures can be found in the colored facade plasters:

• "Fur coat". Formed by a special technique for laying the mixture on the wall surface.

• "Bark beetle". Stone grains are added to the mixture, the fractions of which affect the saturation of the layer. This creates a surface relief similar in texture to wood eaten by bark beetles.

• "Lamb". Stone of various fractions is added to the mixture, due to which a bumpy relief is created.

• "Groats" (pebbly). Formed using a mixture with large-fraction pebbles. The fine-grained relief resembles cereals in appearance.

• Mosaic. Created using acrylic mixtures with decorative stone.

Plaster manufacturers

Among the producers of colored plaster for facades, the following businesses are particularly notable.

• Knauf. Founded in 1932 in Germany. Offers mineral plaster. Advantages – ease of use, versatility, quick drying, hygroscopicity and ability to retain moisture. Disadvantage – the cost of Knauf plaster, which is higher than that of competitors.
• Baumit. The Austrian concern supplies silicone, silicate and acrylic facade colored plaster, characterized by a long service life. Baumit products withstand temperature changes and do not accumulate moisture, and are offered on the market at an affordable price.
• Kaparol. The brand is part of the German Deutsche Amphibolin-Werke, operating since 1895. Under this brand, silicone and acrylic plaster is produced, which has a high degree of economy, because the coating material does not require multi-layer application to the surface. At the same time, the Kaparol mixture has a stable color and is environmentally friendly, since it contains 2% solvents. Other manufacturers have this figure of 50%. Disadvantage – high cost of plaster.
• OOO "Bolars". Russian company. Offers mineral plaster, characterized by elasticity, resistance to sunlight and temperature changes. Bolars products are used even in areas with a harsh climate.

Plaster with colored facades is an attractive and useful option for improving a building’s exterior. Its vast array of hues and textures lets homeowners create the ideal aesthetic while shielding them from the elements.

You can extend the lifespan of your facade and lessen the need for regular maintenance by selecting the appropriate colored plaster. In the long run, this makes it a cost-effective solution.

Achieving a sleek, contemporary look or a more conventional finish can be achieved with colored facade plaster, which provides flexibility to accommodate different design tastes. It’s an investment in your home’s longevity as well as its appearance.

Video on the topic

Raduga-34 (decorative textured plaster). Application instructions

Decorative acrylic plaster "pebble" CERESIT CT 60

Decorative pebble plaster. How to work with it.

Cool facade for pennies. Inexpensive and beautiful decorative plaster.

CEMENT + PVA = Venetian facade plaster. CEMENT + PVA = Venetian facade plaster.

Decorative plaster "Art concrete". application Blocks. Art beton