Choosing and using hangers for plasterboard

The choice of hangers is essential when it comes to plasterboard wall decoration or functional additions. Choosing the correct kind of hanger will guarantee that your wall stays intact and your items are mounted securely, whether you’re hanging shelves, pictures, or heavier objects.

Drywall, another name for plasterboard, presents a unique set of difficulties. Since it’s not as strong as solid walls, choosing the incorrect hangers could result in mishaps or even damage. Knowing what kinds of hangers are available and how to use them correctly can make a big difference.

In this post, we’ll look at the different hanger options available to you, their unique applications, and advice on how to hang things on plasterboard walls with maximum effect. If you have the right information, you can decorate your room with confidence and not have to worry about breaking down your walls.

Plasterboard hangers require careful selection based on the weight-bearing capacity of your wall. Proper installation is also essential to ensure a secure fit. Understanding your options will help you keep your items mounted safely and avoid damaging your plasterboard, as hangers vary in the amount of load they can support.

What are hangers used for

When it comes to: these fittings are an essential technical component of the work process.

1. Create a gap from the base. The fixing elements have different lengths, which are limited by the device of the component. This allows you to level out the unevenness of the base, creating a single plane when installing rack or ceiling profiles.
2. Fix the vertical and horizontal parts of the frame. After leveling and adjusting the suspension, the sheathing fragments are securely fastened, which ensures the stability of the structure to external influences.
3. Get the desired decorative effect. When working with multi-level compositions, it is necessary to achieve precise placement of the lower segments. They are not always tied to the base, and fasteners make it possible to obtain the required tier.
4. Significantly reduce the height of the ceilings. If you need to reduce the space by 10 cm or more.

Hangers are a crucial component of the frame system because they perform a number of tasks, such as load distribution and profile alignment and fixing. Because there are many low-quality products on the market, it is important to consider the products’ quality when making a decision.

Types and sizes of hangers for plasterboard

As a result of their demand during installation procedures, there are currently multiple primary product types.

Direct

The products in this most popular category are versatile and have many uses. These fittings allow you to fasten profiles to the ceiling and walls. Because of the shape that the fragment takes when fixing the lathing, it is also known by its common name, the U-shaped element.

• The straight metal suspension has a standard length of 300 mm and a width of 30 mm. This structure ensures reliable retention of frame elements with a 60 mm back. The thickness varies from 0.4 to 1 mm, but it is not recommended to use too thin plates (less than 0.6 mm), since they quickly deform. There is an extended version to create a larger gap from the base – 52 cm. This variety is not always available for sale, so it is supplied to order.
• The products are made of galvanized steel, which ensures resistance to moisture.
• Standard structure: in the center there is a plate with several holes and antennae, and the sides have fixation points in two rows.
• When the product takes on a U-shape, the protruding parts have dimensions of about 120 mm with a center of 60 mm, with antennae – 90 mm.

Its popularity can be attributed to how easily and quickly the straight element can be attached. There is an elongated hole in the center for alignment and baiting, but it is rarely used. Two internal points are located along the edges for initial wall fastening.

1. Self-tapping screws are screwed into the cut out antennae when hanging the profiles on the ceiling, which prevents the part from stretching.
2. The extreme sections are bent and the fittings are fixed to the CD through the holes on each side.

A load of 25 kg can be supported by a standard fitting with a thickness of 0.5–0.8 mm; a load of up to 40 kg can be supported by reinforced options. Between 50 and 60 centimeters is the ideal placement step. The distance is lowered to 35–40 cm when there are noticeable deformations in the base and when interior items are hung afterward.

Sliding

Also known as adjustable suspension or anchor. The element’s structure is different from the previous iteration, enabling you to construct a ceiling out of plasterboard sheets that meet the necessary levels. The use is restricted in scope.

1. The main part is a T-shaped part, the lower section may be different depending on the manufacturer and serves to fix between the ribs of the profile. The elongated fragment facing the base on which the clamp is located is called a spring. There are two holes at its ends.
2. The suspension rod is a separate element, also called a wire or a spoke. One end of the rod is straight, and the other has an eye that serves to fix the anchor. The thickness of the fragment is at least 4 mm, the length is from 35 to 150 cm.
3. To assemble the elements, the clamp is slightly bent, a spoke is inserted into it, after which the tie is straightened and the wire is securely fixed.
4. The design can be extended. For this, a rod and a double-sided clamp are added to the kit. The assembled configuration resembles wire hangers for T-shaped profiles used for assembling ceiling panels.
5. The additional fragment is joined in such a way that the long spoke is threaded through two clamps. Parallel to it, a rod with an eye is pushed through the double-sided coupler to increase the size (see. photo).

The product is installed by drilling 40 to 60 cm holes in the base and inserting special ceiling anchors into them, to which the spoke eye is hooked.

It is also possible to suspend elements from dowels by clamping the rounded end of the rod. However, because this technology doesn’t always offer the required dependability, it’s only appropriate for lightweight constructions.

Guidance! Clamp fasteners are ideal for two-level ceilings where the tier must be lowered significantly.

Less popular varieties

Other methods can also be used to assemble the gypsum board frame:

• Vibration hangers. This is a specialized product that is used to level out sound vibrations transmitted through the base. This includes several varieties that differ in design. The low demand for products is explained by the high price.
• Vernius hanger. Consists of an upper and lower part, which allows you to adjust the size. Length can vary from 40 to 100 cm. Provides high reliability and strength. The installation technology is similar to the anchor version, but the resulting structure is more rigid and can withstand a load of more than 40 kg. Suitable for multi-level structures with a complex shape.

While specialized varieties simplify work, they do demand specific competencies.

Plasterboard hangers are a crucial tool for keeping plasterboard in place and guaranteeing a stable and smooth wall finish. Selecting the appropriate hanger type will make it simple to manage various wall layouts and weight requirements.

When choosing your hangers, it’s crucial to take the plasterboard’s weight and dimensions into account. Stronger hangers give larger surfaces or heavier boards the support they need to avoid drooping or warping over time.

It is equally important to use the proper technique during installation. Plasterboard is less likely to sustain damage or result in uneven surfaces when it is properly aligned and fastened. You can achieve a professional finish that improves the appearance and longevity of your walls by using the appropriate hangers and installation techniques.

Video on the topic

The eternal question: timber or profile

KNAUF IS BETTER ? TWO-LEVEL SUSPENSIONS FOR CD PROFILE. DRYWALL INSTALLATION.

Universal direct hanger. Design, application. www.maysterfix.com

Profile punch | Pros and cons

Drywall profile. Secrets and features of work. Briefly and to the point.

Plasterboard ceiling How to attach hangers after all

How to choose a profile for plasterboard for a beginner

Which dowels are better for plasterboard.