One of the most crucial parts of building or remodeling a private home is setting up the boiler room. A well-thought-out boiler room guarantees that your house stays warm in the winter, produces hot water when needed, and runs smoothly, reducing energy expenses.
There’s more to the boiler room than just housing the boiler. In order to accommodate different components like pumps, pipes, and safety systems, careful planning is required. When designing this space, safety regulations, adequate ventilation, and ease of maintenance access are all important factors to take into account.
Selecting the appropriate boiler room equipment can be daunting, as there are numerous options available, ranging from conventional gas boilers to more contemporary and environmentally friendly choices like heat pumps. Making educated decisions that fit your house and lifestyle will be made easier if you comprehend the fundamentals of these systems and their requirements.
This post will walk you through every step of installing a boiler room in a private home, from choosing the best type of boiler to making sure it runs safely and effectively. These pointers will assist you in developing a dependable and efficient heating solution, regardless of whether you’re building a new house or replacing an old one.
Component | Description |
Boiler | The central unit that heats water for the house. |
Pipes | They transport hot water from the boiler to radiators and taps. |
Radiators | These devices release heat into rooms. |
Expansion tank | It manages the pressure changes as water heats up and cools down. |
Pump | Ensures water circulates throughout the system. |
Thermostat | Controls the temperature of the water and heating. |
- Requirements for the boiler room
- Construction of a separate room
- Finishing the boiler room
- Ceramic tiles
- Sheet materials
- Video on the topic
- This scheme will suit everyone
- 9 basic requirements for a gas boiler room in a private house in 2025
- Heating and water supply system of a private house. What a modern boiler room should look like!
Requirements for the boiler room
It is thought that setting up a separate room to install and keep an eye on all heating equipment will be the best solution to all problems. Furthermore, this will enable you to construct the walls, floor, and ceiling using the necessary materials. In other words, nothing will need to be redone.
There are some subtleties that you should anticipate beforehand. Whether the boiler room is housed inside the house or in a separate building makes no difference whatsoever.
- Based on the area of the premises of the object, you need to immediately calculate the required boiler capacity.
- It is advisable to purchase all equipment in advance.
- The place for the boiler room inside the house should be located along a blank wall. If there are window openings, then they need to be laid. Also come with doorways.
- The door to the boiler room is selected according to the required size. The main rule is that it should be refractory. A simple interior canvas will not work.
- The dimensions of the room are determined by special standards:
• So, the total volume of such an object should be more than 15 m³;
• The distance from the floor to the ceiling cannot be less than 250 cm;
• The area on which the boiler will be installed starts from 4 m²;
• All these requirements relate to all types of heating devices. - The best wall decoration will be tiles.
A separate boiler room device is not necessary in a private home when a gas boiler up to thirty kW is used. You can even put it in the kitchen. Naturally, there are a number of requirements for this as well.
Guidance! It is best to start by contacting a business that manages compliance with all regulations and standards pertaining to the installation and operation of boiler equipment. Your only protection against having to start over from scratch later on is this.
Construction of a separate room
You must first create a plan for the separate boiler room and get the gas service staff’s approval before beginning construction. This item needs to be a part of the site’s technical plan as well.
- the building being erected must have a foundation, it should not adjoin the house;
- a separate platform is arranged for the boiler, which should be twenty centimeters higher than the floor;
- there must be a direct exit from the room to the street;
- a hood must be selected separately, which can be made independently.
Recognize that some modular designs are exclusive. It already includes everything you need. They are rather pricey, though.
In a private home, installing a boiler room is essential to guaranteeing effective and secure heating. This post will walk you through the essential elements, design factors, and security precautions required to build a dependable and efficient boiler room. Everything you need to know to keep your house warm and your heating system operating efficiently will be covered, from selecting the ideal boiler to making sure adequate ventilation and maintenance.
Finishing the boiler room
All surfaces in the room have to be composed of non-combustible materials as per current standards.
- If the walls were made of wood, then such a structure needs more thorough processing. To do this, they are impregnated with fire-resistant compounds and covered with reflective thermal insulation. Then they are covered with fire-resistant plasterboard.
- The floor must be leveled, for this they use a mixture of cement and sand.
- Also, waterproofing should be provided. The floor is covered with special materials (roll or coating), a section of the wall at a height of ten centimeters is captured.
The walls’ finishing must also be done carefully because they will be the most impacted:
- The walls are pre-cleaned, unnecessary objects are removed. So, the windows along the wall where the boiler will be located are completely laid.
- Now you can begin the process of applying the first layer of plaster, it will allow you to level out any defects.
- Putty is used as a finishing layer. With its help, you can prepare the surface for final processing.
Ceramic tiles
When it comes to finishing the walls in a boiler room, ceramic tiles are thought to be the best option. It fulfills every requirement needed for this kind of coating. This material can withstand significant temperature variations. Its positive qualities cannot be altered, not even by open flame. The fact that it faces fireplaces and stoves is not insignificant. Nevertheless, careful consideration must be given to the tiles in the boiler room. It is advised to confirm that it possesses the required certificates of conformance for this before making a purchase.
However, it’s best to avoid laying ceramic floor tiles. Porcelain stoneware is the better option for these uses. It is resilient to powerful mechanical strikes.
The following is how tile installation is done:
- The required amount of material is purchased in advance. This must be done from stocks, which should be + 10%.
- The walls need to be made fairly even, without any significant differences. For this, putty is used, which is used to level the surface.
- Tiles for the boiler room are glued with a special glue, although a putty mixture is often used for this.
- The main thing is to make the joints between tiles as small as possible. It is better not to use white compounds for grouting.
- It is advisable to give preference to glazed products.
Sheet materials
KVL sheets, also known as xylolite fiber sheets (see photo), are growing in popularity:
- They are able to withstand high temperatures up to one thousand degrees.
- They do not emit any harmful substances.
- They can be installed even on uneven surfaces.
- They need subsequent finishing with fire-resistant plaster, which is then covered with water-based paint.
There is also a material covering the ceiling that is resistant to high temperatures. Using tiles for this will obviously not be feasible. Then different sheet materials prove useful. However, you must first install adequate vapor and hydro insulation. To do this, specific roll products are used.
Ensuring the room is sufficiently fire-resistant to withstand an open flame for approximately twenty-five minutes is crucial. Naturally, it is preferable that there be no chance for a fire to start in the first place.
Installing a boiler room is an essential step in guaranteeing a cozy and effective heating system in a private residence. It’s crucial to carefully weigh your options during the planning and installation process because the choices you make can have a big impact on how well your home heats overall.
Everything from selecting the ideal boiler to adequately ventilating the area contributes to the creation of a secure and useful boiler room. For years to come, you can guarantee that your system will continue to function smoothly and efficiently by adhering to recommended guidelines and standards.
Maintaining a functional boiler room necessitates routine maintenance and inspections. Early detection and resolution of possible problems can save expensive repairs and increase the equipment’s lifespan, making it a wise investment for your house.